EmbeddedDeveloper.com -


	Parametric Search

Home » Development tools for MCF51AC256

Development tools for MCF51AC256

« Return to MCF51AC256

DEMOAC: Flexis™ AC Family Demo Board

The DEMOAC provides a platform supporting a line of Freescale microcontrollers which are part of the Flexis Continuum. Target microcontrollers mount on plug-in modules to support quickly changing the target MCU. [more]

Sourcery G++ for ColdFire ELF

Sourcery G++™ for ColdFire ELF is CodeSourcery´s professional C/C++ development tool suite for ColdFire® bare metal target systems.

[more]

Sourcery G++ for ColdFire uClinux

Sourcery G++™ for ColdFire uClinux is CodeSourcery´s professional C/C++ development tool suite for ColdFire® uClinux target systems.

[more]

Sourcery G++ for ColdFire GNU/Linux

Sourcery G++™ for ColdFire GNU/Linux is CodeSourcery´s professional C/C++ development tool suite for ColdFire® GNU/Linux target systems.

[more]

CodeWarrior for Microcontrollers

Freescale´s CodeWarrior Development Studio for Microcontrollers v6.3 is a single, integrated tool suite designed to get you on the design fast track with RS08, HC(S)08 and ColdFire V1 members of the Freescale Controller Continuum. [more]

winIDEA (IDE)

winIDEA™ is the ultimate Integrated Development Environment, which contains all the necessary tools in one shell. One of the goals in the development of winIDEA was to achieve a tight integration of all stages of program development (edit, build, debug & test) by a single application. [more]

Micrcross GNU X-Tools

Developers around the world have come to trust GNU tools for their quality, performance, and consistent interface across multiple target CPUs. Available from USI are the Microcross GNU X-Tools™, which offer wide coverage of reliable, low-cost, and supported open source embedded tools. [more]

usb2Demon™ USB interface for JTAG & BDM

The usb2Demon™ is a Universal Serial Bus interface for JTAG and BDM debugging. Faster than a Wiggler or a Raven, it is a stable, easy to use device and is fully compatible with all of our software. [more]

LinuxScope-JTD

LinuxScope-JTD is a plug-in debugger for the Eclipse IDE optimized for use with the Abatron BDI2000/BDI3000 BDM/JTAG probe. [more]

iC3000 ActiveEmulator

The iC3000 ActiveEmulatorTM is the ultimate tool for high performance micro-controller based embedded applications. It incorporates major innovation in a compact package, covering the widest variety of development environments.
The iC3000 supports all famous On-Chip Emulation technologies like BDM, SDI, Once, JTAG and Nexus for On-Chip Debugging. For On-Chip Trace ETM and Nexus solutions are available.

[more]

High-speed BDM/JTAG Interface for GNU Debugger

The BDI high-quality and high-speed JTAG debug interfaces offer a wide range of solutions for debugging and programming embedded hardware and software as well as for production purposes. [more]

PEEDI - JTAG/BDM/SWD Flash Programmer

The JTAG/BDM Flash Programmer is a solution that enables you to program on-board and on-chip FLASH devices on ARM, PowerPC, ColdFire and Blackfin processor cores via the JTAG/BDM port. [more]

CMX-Tiny+ RTOS

The CMX-Tiny+ real time, preemptive multi-tasking operating system is an extremely ´lean and mean´ kernel for those processors that have a small amount of RAM embedded on the [more]

SMX.Blaze

SMX.Blaze offers networking and multitasking in a low-cost, integrated package for embedded systems. Multitasking allows the networking and application portions to operate independently, thus making design easier.
To enhance project success further, SMX.Blaze provides processor-specific BSP and startup code and tool-specific project and help files. These ensure that your project will get off to a quick start and never look back.

Prices start at $15,000. [more]

smx® Real Time Kernel for ColdFire

The Benefits of smxCF, the version of smx designed for the Coldfire processor family, include:

Reduced development schedule and cost
Lower product cost
Cost effective—buy only what is needed
Fast start, integrated solution
No device drivers to write
High success rate
Future needs are covered

Prices start at $7,500. [more]

embOS (Real Time Operating System)

embOS is an RTOS designed to offer the benefits of a complete multitasking system for hard real time applications with minimal resources. [more]

CMX TCP/IP is a full-featured and fast TCP/IP stack

CMX Systems CMX TCP/IP is a full-featured and fast TCP/IP stack that allows designers to offer networking connectivity for their embedded applications. CMX TCP/IP supports the following connectivity options: Direct, Dial Up and Ethernet. [more]

CMX-MicroNet is a very small and fast TCP/IP stack

CMX-MicroNet is a very small and fast TCP/IP stack that allows designers to offer networking connectivity for their embedded applications. CMX-MicroNet supports the following connectivity options: Direct, Dial Up, Ethernet, and Wireless Ethernet (802.11b.) [more]

CMX-USB

CMX-USB is targeted at systems which need USB device connectivity and the USB interface is provided to the End Point management level. CMX-USB provides an integrated suite of USB device functionality that [more]

FAT

FAT is a high-performance, full-featured, FAT12/16/32-based, DOS-compatible file system designed for embedded applications. [more]

TINY

TINY is a failsafe flash file system designed for minimal environments. It can be used with any flash device with small erasable sectors. It is ideal for most standard serial flash parts, as well as flash-based microcntrollers with small erasable sectors (e.g., MSP430) and RAM drives. [more]

SAFEFLASH

High-performance, failsafe flash file system. Provides wear leveling, bad block management. [more]

SAFE-FAT

High-performance, failsafe FAT12/16/32 file system. SAFE-FAT is a journaling system. It guarantees that all operations will be carried out in a failsafe manner. [more]

THIN

THIN is a highly optimized, reduced footprint version of our highly successful FAT system. This DOS compatible file system is designed for configurations with limited resources. It works well with the 8051, MSP430 and H8S series MCUs and is suitable for use with most 8-bit and 16-bit CPUs.

THIN is scalable. By selecting only the functionality required for the application, the system becomes highly optimized for both speed and size. [more]

FTL

FTL is a standard flash translation layer that allows an array of NAND flash to be addressed as a set of standard 512Byte, 2K or 4K logical sectors. [more]

EUSBD

The EUSBD™ (Embedded USB) device stack has been designed by HCC’s embedded system engineers to provide the most efficient USB device solutions. EUSBD-BS (the EUSB Base System) provides a USB device stack for end-point control. [more]

EUSBH

HCC´s EUSBH (Embedded USB Host Stack) is a full-featured host stack designed for embedded applications. [more]

NicheStack Dual IPv4/IPv6

NicheStack Dual™ offers a unique and flexible combination of networking support for devices that must operate in today´s IPv4 based networks and be compatible with future upgrades to IPv6 environments. [more]

smxUSBD USB Device Stack

The smxUSBD USB device stack and the smxUSBH USB host stack have been specifically designed for embedded systems. They are robust and offer good performance. Both are written in ANSI-C, and can run on any hardware platform. Though optimized for SMX®, either stack can be ported to another RTOS or operated in a stand-alone mode. USB software development services are also available.

Prices start at $4,000. [more]

smxUSBH USB Host Stack

smxFS Small File System

smxFS offers a clean, modular design that enables embedded developers to easily add file I/O to their projects. smxFS supports both removable media such as USB thumb drives and Compact Flash and non-removable media such as NAND flash disks. Removable media are DOS/Windows compatible so that they may be exchanged with Windows and other compatible RTOSs.

Prices start at $4,000 [more]

SMX TCP/IP

Two SMX TCP/IP stacks are available: smxNS and smxNet. Both are full TCP/IP stacks and offer additional networking software such as email, web server, and SNMP. smxNS is more compact and is ideal for small systems. smxNet is larger, more full-featured, and offers a larger number of additional network protocols.

Prices start at $8,500. [more]

emWin (Graphics Software and GUI)

emWin is designed to provide an efficient, processor independent, LCD controller independent, graphical user interface for use in any embedded application, and with or without any commercial RTOS. [more]

emUSB (Embedded USB Stack)

An embedded Universal Serial Bus (USB) stack designed to work on any embedded system with a USB device controller. Ports for most common USB devices are available. It can be used with USB 1.1 or USB 2.0 devices. [more]

emFile (Embedded File System)

emFile is an embedded file system with FAT12, FAT16, and FAT32 support. A SEGGER proprietary file system is also available. This high performance module has been optimized for minimum memory consumption in RAM and ROM while maintaining high speed and versatility. [more]

embOS/IP (TCP/IP Stack)

embOS/IP is a CPU independent TCP/IP stack. This high-performance library has been optimized for speed, versatility and memory footprint. [more]

PCAN-USB Adapter

This non-optically isolated USB-to-CAN converter, includes PCANview monitor software. This adapter makes it possible to connect any laptop computer or PC with a USB connector to a CAN bus. Galvanic isolation [more]

IAR visualSTATE

IAR visualSTATE is a UML-compliant graphical state machine design tool for embedded systems. It provides advanced verification and validation tools and generates very compact C code that is 100% consistent with your system design.

IAR visualSTATE is an ideal design, test and code generation tool for real-time systems with many concurrent and interrelated processes or execution threads. [more]

Java Board Test

Combining your JTAG interface, the free Eclipse Development Environment, the free JUnit testing software and following the free instructions here ... gives you a powerful test environment. [more]

Embedded Developer