| Professional-Grade Development Kit: PIC32 Industrial Host Controller for StackableUSB™ |
|
The DK1032 is a turn-key development kit with an extensive tool base allowing for immediate out-of-the-box development for the USB1032 PIC Industrial Host (includes board, complete cable set, firmware, and docs). The USB1032 is the ideal module for applications requiring more performance than typical micro-controllers have offered and is well-suited for applications confined to small, tight spaces, the 125 DMIPS performance requires only 100mA power, considerably less than an SBC. [more] |
|
| Professional-Grade Development Kit: PIC32 Industrial Host Controller for StackableUSB™ |
|
|
The DK1032 is a turn-key development kit with an extensive tool base allowing for immediate out-of-the-box development for the USB1032 PIC Industrial Host (includes board, complete cable set, firmware, and docs). The USB1032 is the ideal module for applications requiring more performance than typical micro-controllers have offered and is well-suited for applications confined to small, tight spaces, the 125 DMIPS performance requires only 100mA power, considerably less than an SBC. [more] |
|
|
|
The PIC32 Starter Kit provides the easiest and lowest cost method to experience the PIC32 microcontroller for the first time. From the over 35 source code examples to the getting started project, users quickly learn Microchip´s 32-bit family of microcontrollers and development tools. The kit includes everything needed to write, program, debug, and execute code on a high performance PIC32 microcontroller. [more] |
|
|
|
This PIC32 Plug-In Module enables PIC32 development on the Explorer 16 development board (DM24000x) and supports the MPLAB REAL ICE Trace Kit (AC244006). An 80 MHz [more] |
|
| Explorer 16 Development Board |
|
The Explorer 16 is a low cost, efficient development board to evaluate the features and performance of Microchip´s new PIC24 Microcontroller, the dsPIC33 Digital Signal Controller (DSC) families, and the new 32-bit PIC32MX devices. [more] |
|
| Sourcery G++ for MIPS ELF |
|
Sourcery G++™ for MIPS ELF is CodeSourcery´s professional C/C++ development tool suite for MIPS® bare metal target systems. [more] |
|
| Sourcery G++ for MIPS GNU/Linux |
|
|
Sourcery G++™ for MIPS GUN/Linux is CodeSourcery´s professional C/C++ development tool suite for MIPS® GNU/Linux target systems. [more] |
|
|
|
Hot Spot Analyzer - is an Eclipse plug-in that provides non-intrusive profiling of software running on MIPS32® cores. It is built on the unique Zero Overhead Program Counter (PC) Sampling feature included in the MIPS32 24K®, 34K®, and 74K™ cores. [more] |
|
|
|
Navigator ICS - supports all MIPS32® and MIPS64® processor cores and is fully integrated with the CodeSourcery SG++ GNU-based Toolchain for MIPS, providing a complete development environment and a rich set of software utilities that are easy to install and use. [more] |
|
|
|
Developers around the world have come to trust GNU tools for their quality, performance, and consistent interface across multiple target CPUs. Available from USI are the Microcross GNU X-Tools™, which offer wide coverage of reliable, low-cost, and supported open source embedded tools. [more] |
|
| PICkit 2 Development Programmer/Debugger |
|
The PICkit™ 2 Development Programmer/Debugger (PG164120) is a low-cost development tool with an easy to use interface for programming and debugging Microchip’s Flash families of microcontrollers. The full featured Windows® programming interface supports baseline (PIC10F, PIC12F5xx, PIC16F5xx), midrange (PIC12F6xx, PIC16F), PIC18F, PIC24, dsPIC30, dsPIC33, and PIC32 families of 8-bit, 16-bit, and 32-bit microcontrollers, and many Microchip Serial EEPROM products. [more] |
|
|
|
The Arriba Linux Debugger for MIPS-Based™ systems was developed by MIPS Technologies in cooperation with Viosoft Corporation. It is available exclusively from MIPS Technologies as an Eclipse plug-in for the MIPS Navigator™ ICS (Integrated Component Suite) or for any Eclipse-based Integrated Development Environment (IDE). It provides developers with the ability to debug the Linux kernel as well as Linux drivers, loadable modules and applications. [more] |
|
|
|
LinuxScope-JTD is a plug-in debugger for the Eclipse IDE optimized for use with the Abatron BDI2000/BDI3000 BDM/JTAG probe. [more] |
|
| High-speed BDM/JTAG Interface for GNU Debugger |
|
The BDI high-quality and high-speed JTAG debug interfaces offer a wide range of solutions for debugging and programming embedded hardware and software as well as for production purposes. [more] |
|
| System Navigator™ Pro Probe |
|
System Navigator™ Pro probes support all MIPS32® cores with PDtrace™ if the core is designed to stream processor trace data off-chip. System Navigator Pro probes support both on-chip and off-chip trace features, capturing up to 2GB of trace. The System Navigator Pro probe connects to the target system using a 38-pin Mictor connector. [more] |
|
| MIPS System Navigator™ Probe |
|
MIPS Technologies´ System Navigator™ probes support all of the latest MIPS® cores and licensee processors in the MIPS32® family, from the 4K® and 4KE® cores to the 1004K™ coherent processing system. System Navigator probes are designed to support the special features and integrated peripherals of the MIPS family of synthesizable cores. They leverage MIPS EJTAG debug features and also support advanced PDtrace™ features, if implemented, in the processor. The System Navigator probe connects to the target system using a standard 14-pin EJTAG debug connector. [more] |
|
| PEEDI - JTAG/BDM/SWD Flash Programmer |
|
The JTAG/BDM Flash Programmer is a solution that enables you to program on-board and on-chip FLASH devices on ARM, PowerPC, ColdFire and Blackfin processor cores via the JTAG/BDM port. [more] |
|
| PEEDI - JTAG/BDM Emulator |
|
PEEDI - high speed JTAG/BDM Emulator is is an EmbeddedICE solution that enables you to debug software running on ARM7, ARM9, ARM11, XSCALE, CORTEX-M3, CORTEX-A8, PowerPC, ColdFire, Blackfin, MIPS32, AVR32 processor cores via the JTAG/BDM/SWD port. PEEDI provides the services needed to perform all debugging operations. [more] |
|
|
|
FAT is a high-performance, full-featured, FAT12/16/32-based, DOS-compatible file system designed for embedded applications. [more] |
|
|
|
|
High-performance, failsafe flash file system. Provides wear leveling, bad block management. [more] |
|
|
|
|
TINY is a failsafe flash file system designed for minimal environments. It can be used with any flash device with small erasable sectors. It is ideal for most standard serial flash parts, as well as flash-based microcntrollers with small erasable sectors (e.g., MSP430) and RAM drives. [more] |
|
|
|
|
High-performance, failsafe FAT12/16/32 file system. SAFE-FAT is a journaling system. It guarantees that all operations will be carried out in a failsafe manner. [more] |
|
|
|
THIN is a highly optimized, reduced footprint version of our highly successful FAT system. This DOS compatible file system is designed for configurations with limited resources. It works well with the 8051, MSP430 and H8S series MCUs and is suitable for use with most 8-bit and 16-bit CPUs.
THIN is scalable. By selecting only the functionality required for the application, the system becomes highly optimized for both speed and size. [more] |
|
|
|
|
FTL is a standard flash translation layer that allows an array of NAND flash to be addressed as a set of standard 512Byte, 2K or 4K logical sectors. [more] |
|
|
|
|
The EUSBD™ (Embedded USB) device stack has been designed by HCC’s embedded system engineers to provide the most efficient USB device solutions. EUSBD-BS (the EUSB Base System) provides a USB device stack for end-point control. [more] |
|
|
|
|
HCC´s EUSBH (Embedded USB Host Stack) is a full-featured host stack designed for embedded applications. [more] |
|
| emWin (Graphics Software and GUI) |
|
emWin, one of the most efficient and comprehensive embedded GUIs available, helps developers beat their timelines and cut their development costs. It is written in ANSI "C" and supports any black and white, grayscale, and color display. [more] |
|
| emUSB (Embedded USB Stack) |
|
|
emUSB Host/Device Stack has been designed to work on any embedded system with a USB controller. Ports for most common USB controllers are available. It can be used with USB 1.1 or USB 2.0. [more] |
|
| emFile (Embedded File System) |
|
|
emFile is an embedded file system which can be used with any type of storage device. emFile is a high performance library that has been optimized for; minimum memory consumption in RAM and ROM, high speed, and versatility. It is written in ANSI-"C" and can be used on any CPU. [more] |
|
|
|
IAR visualSTATE is a UML-compliant graphical state machine design tool for embedded systems. It provides advanced verification and validation tools and generates very compact C code that is 100% consistent with your system design.
IAR visualSTATE is an ideal design, test and code generation tool for real-time systems with many concurrent and interrelated processes or execution threads. [more] |
|
| GoFast® Floating Point Library |
|
GoFast is a family of fast, IEEE 754 floating point libraries designed for embedded applications. They are fast because they are written in assembly language and specifically optimized for each processor. They are much faster than floating point libraries included with compilers. They are ANSI C compatible and are designed to directly replace a C compiler’s runtime floating point support (library or coprocessor). GoFast® boosts the performance of an application’s math calculations or eliminates the need for hardware floating point coprocessors, in order to reduce product manufacturing cost. GoFast® libraries are reentrant.
Prices start at $3,500. [more] |
|
|
|
