The Fusion® Starter Kit is an all-inclusive, low-cost evaluation kit for the Actel Fusion™ family. Explore the various benefits of the mixed-signal Fusion PSCs, including ISP, device serialization, and FlashLock® on-chip system security. [more]
IGLOO PLUS Starter Kit
The low-cost IGLOO PLUS Starter Kit features the IGLOO PLUS family of low-power FPGAs, which offer the industry´s best power-, area-, logic- and feature-per-I/O ratios in a programmable device. [more]
"Taihu" 405EP Evaluation Kit
The AMCC 405EP evaluation kit provides users with a comprehensive set of resources to evaluate the 405EP processor as well as to start system development. [more]
"Yosemite" PPC 440EP Evaluation Kit
The AMCC 440EP evaluation kit provides users with a comprehensive set of resources to evaluate the 440EP processor as well as to start their system development. [more]
"Yellowstone" PPC 440GR Evaluation Kit
The AMCC 440GR evaluation kit provides users with a comprehensive set of resources to evaluate the 440GR processor as well as to start their system development. [more]
"Sequoia" PowerPC 440EPx Evaluation Kit
The AMCC 440EPx evaluation kit provides users with a comprehensive set of resources to evaluate the 440EPx processor as well as to start system development. [more]
"Acadia" PowerPC 405EZ Evaluation Kit
The AMCC 405EZ evaluation kit provides users with a comprehensive set of resources to evaluate the 405EZ processor as well as to start system development. [more]
"Rainier" PowerPC 440GRx Evaluation Kit
Enables comprehensive evaluation of the AMCC 440GRx processor, while minimizing customers´ hardware and software development time. [more]
"Taishan" PowerPC 440GX Evaluation Kit
Enables comprehensive evaluation of the AMCC 440GX processor, while minimizing customers´ hardware and software development time. The AMCC 440GX evaluation kit provides users with a comprehensive set of resources to evaluate the 440GX processor as well as to start system development. [more]
"Katmai" PowerPC 440SPe Evaluation Kit
Enables comprehensive evaluation of the AMCC 440SPe processor, while accelerating customers´ hardware and software development time. The AMCC 440SPe evaluation kit provides users with a comprehensive set of resources to evaluate the 440SPe processor as well as to start system development. [more]
"Haleakala" EV-405EXr-KIT-01
The AMCC Haleakala evaluation kit provides users with a comprehensive set of resources to evaluate the 405EXr processor as well as to start system development. [more]
"Kilauea" EV-405EX-KIT-02
Enables comprehensive evaluation of the AMCC 405EX processor, while accelerating customers´ hardware and software development time. [more]
"Canyonlands" EV-460EX-KIT-01
PowerPC 460EX Evaluation Kit Enables comprehensive evaluation of the AMCC 460EX processor, while accelerating customers´ hardware and software development time. [more]
"Glacier" EV-460GT-KIT-01
PowerPC 460GT Evaluation Kit Enables comprehensive evaluation of the AMCC 460GT processor, while accelerating customers´ hardware and software development time. [more]
EZ-KIT Lite® Evaluation Kit for the ADSP-BF52x Blackfin Family
The ADSP-BF527 EZ-KIT Lite® provides developers with a cost-effective method for initial evaluation of the ADSP-BF527 Blackfin® Processors via a USB-based, PC-hosted tool set. With this EZ-KIT Lite, users can learn more about the Analog Devices (ADI) ADSP-BF527 hardware and software development, and quickly prototype a wide range of applications [more]
ADSP-BF537 STAMP Board Support Package
The BF537 STAMP Board Support Package (BSP) provides developers with a cost effective environment to develop embedded systems with the Blackfin Processor. The STAMP BSP has been specifically designed [more]
EZ-KIT Lite® for the ADSP-BF533, ADSP-BF532, and ADSP-BF531 Blackfin® Processors
The ADSP-BF533 EZ-KIT Lite provides developers with a cost-effective method for initial evaluation of the ADSP-BF533 Blackfin Processor [more]
EZ-KIT Lite Evaluation Kit for ADSP-BF561 Blackfin Processor
The ADSP-BF561 EZ-KIT Lite® provides developers with a cost-effective method for initial evaluation of the ADSP-BF561 Blackfin® Processor for audio and video applications via a USB-based PC-hosted tool set. [more]
EZ-KIT Lite for ADSP-BF537 Blackfin Processor
The ADSP-BF537 EZ-KIT Lite® provides developers with a cost-effective method for evaluation of the ADSP-BF537 Blackfin® Processor [more]
EZ-KIT Lite® for the ADSP-BF538 and ADSP-BF538F Blackfin Processors
The ADSP-BF538F EZ-KIT Lite® provides developers with a cost-effective method for initial evaluation of the ADSP-BF538F Blackfin® Processors [more]
Blackfin Multimedia Starter Kit with 561 support
The Blackfin multimedia starter kit provides you everything you need to get started on a multimedia application. [more]
Blackfin Multimedia Starter Kit with 533 support
The Blackfin multimedia starter kit provides you everything you need to get started on a multimedia application. [more]
Blackfin audio starter kit
The Blackfin audio starter kit provides you everything you need to get started on an audio application. [more]
ADSP-BF548 EZ-KIT Lite® Evaluation Kit for the ADSP-BF54x Blackfin Family
The ADSP-BF548 EZ-KIT Lite® provides developers with a cost-effective method for initial evaluation of the ADSP-BF54x Blackfin® Processors via a USB-based, PC-hosted tool set. With this EZ-KIT Lite, users can learn more about the Analog Devices (ADI) ADSP-BF548 hardware and software development, and quickly prototype a wide range of applications. [more]
AT91RM9200-EK Evaluation Board
The AT91RM9200-EK Evaluation Board enables real-time code development and evaluation. It supports the AT91RM9200 ARM9™-based 32-bit RISC microcontroller. [more]
AT91SAM7A3-EK (Evaluation Board)
The AT91SAM7A3 features a 54 MIPS ARM7TDMI processor with 256K bytes of high-speed Flash, 32K bytes of SRAM and a rich peripheral set including two CAN controllers (2.0A and 2.0B Full CAN), a USB 2.0 device, one 8-channel 20-bit Pulse Width Modulation, two 8-channel 10-bit ADCs and a complete set of system functions minimizing the number of external components. It provides a powerful, cost-effective solution to many compute-intensive embedded control applications in the automotive and industrial world. [more]
AT91SAM7S-EK (Evaluation Kit)
The AT91SAM7S-EK evaluation kit enables evaluation capabilities and code development of applications running on an AT91SAM7S device. The board is generally equipped with an AT91SAM7S64 (PQFP 64 package). Evaluation Boards may be shipped with an AT91SAM7S128 or an AT91SAM7S256 device (fully compatible with AT91SAM7S64). [more]
AT91SAM7X-EK Evaluation Board
The AT91SAM7X-EK evaluation kit enables evaluation capabilities and code development of applications running on an AT91SAM7X256/128. The board is equipped with an AT91SAM7X256 (100-pin LQFP Green package) together with a wide variety of interfaces: [more]
AT91SAM7SE-EK Evaluation Kit
The AT91SAM7SE-EK Evaluation Kit enables the evaluation of and code development for applications running on an AT91SAM7SE device. [more]
AT91SAM9261-EK Evaluation Board
The AT91SAM9261-EK evaluation kit is an effective platform for evaluating chip performance and developing code for applications based on the AT91SAM9261. [more]
AT91SAM9260-EK Evaluation Kit
The AT91SAM9260-EK evaluation kit enables the evaluation of and code development for applications running on an AT91SAM9260 device. The board supports the AT91SAM9260 in an LFBGA217 package as well as in a PQFP208 package. [more]
AVR Dragon
The AVR Dragon sets a new standard for low cost development tools. AVR Dragon supports all programming modes for the AVR device family [more]
AVR STK500 Starter Kit
The Atmel AVR STK500 is a starter kit and development system for Atmels AVR Flash microcontrollers. The STK500 gives designers a quick start to develop code on the AVR combined with features for using the starter kit to develop prototypes and test new designs. The STK500 interfaces with AVR Studio, Atmels Integrated Development Environment for code writing and debugging. Expansion cards are available for different AVR sub-families and larger devices. [more]
ATAVRFBKIT Ballast Demo Kit
The ATAVRFBKIT is a Dimmable Fluorescent Ballast kit which demonstrate the ability of the AT90PWM2 to control all the main functions of a DALI Fluorescent Ballast. C code is provided to speed-up development time. [more]
STK525 USB Starter Kit
The STK525 Starter Kit is dedicated to the AT90USB microcontrollers. It supports JTAGICE mkII and AVRISP mkII via AVR Studio. It includes a number demonstration program with source and hex files. The parts can be directly programmed through the USB port with FLIP In-System Programming utility. [more]
SAM3U- EK Development Board
The SAM3U Evaluation Kit (SAM3U-EK) allows the evaluation of the SAM3U series devices. It has enough features to demonstrate most of the product’s capabilities to the users. The SAM3U-EK also features extension connectors to allow the users to add new interfaces in case they are not on-board. [more]
ATNGW100 Network Gateway Kit
This Atmel AVR32 kit is based on the AT32AP7000 Application Processor, and is well suited as a low cost alternative to STK1000. The PCB includes and a full port of royalty-free peripheral drivers, protocol stacks, and communications applications. The Network Gateway kit demonstrates the ability of the AVR32 and its embedded Linux kernel to handle high-speed serial communications including bridging between interfaces that run incompatible serial protocols. Examples include routing and filtering of traffic between two TCP/IP networks as well as routing and filtering of data between TCP/IP, USB and SD cards. [more]
EVK1100 Evaluation Kit
The EVK1100 is an evaluation kit and development system for the AVR32 AT32UC3A microcontroller. It is equipped with a rich set of peripherals, memory, and makes it easy to try the full potential of the AVR32 devices. [more]
AT91SAM9263-EK Evaluation Kit
The AT91SAM9263-EK Evaluation Kit enables the evaluation of and code development for applications running on an AT91SAM9263 device. The board is equipped with an AT91SAM9263 (324-ball LFBGA package) [more]
AVR USB Key Demonstration Kit
The AT90USBKey is a low-cost demonstration board based on the AT90USB1287 microcontroller. It allows the quick evaluation of AVR microcontrollers and the AT90USB family. The key simply connects to the USB port of a personal computer to retrieve on-board documentation and run AVR programs. Designers can either run demonstration programs or their own application. [more]
ATEVK1101 Evaluation Kit
The EVK1101 is an evaluation kit and development system for the AVR32 AT32UC3B microcontroller. It is equipped with a rich set of peripherals, memory, and makes it easy to try the full potential of the AVR32 devices. [more]
ATAVRAUTOEK1 evaluation kit
The ATAVRAUTOEK1 evaluation kit is a very complete ready to use CAN/LIN network with one CAN-LIN gateway (AUTO100) and two LIN slave nodes. One node is used for joystick control (AUTO300) and one node for DC motor control (AUTO200). It provides a CAN/LIN network debugger (AUTO102) connected to PC via USB, allowing to monitor and transmit on both networks using Warwick Technology PC software. It allows customer to quickly start and evaluate Atmel automotive network solutions. [more]
AT91SAM9RL-EK Evaluation Kit
The AT91SAM9RL-EK Evaluation Kit supports the AT91SAM9RL ARM926EJ-S-based 32-bit RISC microcontroller for real-time code development and evaluation. [more]
AT91SAM9XE-EK Evaluation Kit
The AT91SAM9XE-EK Evaluation Kit enables the evaluation of and coder development for applications running on an AT91SAM9XE device. [more]
ATAVRRZRAVEN 2.4 GHz Evaluation and Starter Kit
The RZRAVEN 2.4 GHz Evaluation and Starter kit enables development, debugging and demonstration of a wide range of low power wireless applications including IEEE 802.15.4, 6LoWPAN and ZigBee networks. [more]
AVR® STK600 Starter Kit
The Atmel AVR® STK600 is a complete starter kit and development system for the AVR and AVR32 flash microcontrollers from ATMEL Corporation. It is designed to give designers a quick start to develop code on the AVR, combined with advanced features for using the starter kit to prototype and test new designs. STK600 is shipped with a ATmega2560 device board. [more]
AT91SAM9G20-EK Evaluation Kit
The AT91SAM9G20-EK Evaluation Kit supports the AT91SAM9G20 ARM926EJ-S-based 32-bit RISC microcontroller for real-time code development and evaluation. [more]
AT91SAM7L-STK Starter Kit
The AT91SAM7L-STK Starter Kit enables evaluation capabilities and codedevelopment of applications running on an AT91SAM7L64/128. [more]
AT91EB40A Evaluation Kit
The AT91EB40A Evaluation Kit supports the AT91R40008, enabling real-time codedevelopment and evaluation. [more]
AT91EB42 Evaluation Kit
The AT91EB42 Evaluation Kit supports the AT91M42800A enabling real-time codedevelopment and evaluation. [more]
AT91EB55 Evaluation Kit
The AT91EB55 Evaluation Kit permits rapid evaluation and application development on the AT91M55800A. [more]
AT91SAM9G10-EK Evaluation Kit
The AT91SAM9G10-EK evaluation kit is an effective platform for evaluating chip performance and developing code for applications based on the AT91SAM9G10. [more]
AT91CAP9 Starter Kit
The AT91CAP9 Starter Kit is supplied with an essential set of development tools in order to get started immediately. These include:
KickStart version of IAR™ Embedded Workbench® for ARM®
Microsoft® Windows CE ® Board Support Package and demonstration from Adeneo
Instructions for downloading Altera´s free Quartus® 2 Web Edition tools for FPGA programming
Xplain is an easy to use evaluation and demonstration kit for ATxmega128A1,offering a complete hardware for evaluating the highly accurate analogfunctionality of the device. [more]
ATQT600
The Atmel QT600 is a complete touch development kit for buttons, sliders and wheels. [more]
SAM3S Evaluation Kit
The SAM3S Evaluation Kit (SAM3S-EK) enables evaluation capabilities and code development of applications running on a SAM3S4C device. [more]
EVAL-BF5xx - Blackfin Evaluation Board
The EVAL-BF5xx Blackfin Evaluation Board is designed for evaluating all Blackfin Core Modules and provides flexible interfaces user specific extensions. Besides connectors for all Core Module pins the EVAL-BF5xx Evaluation Board contains a SD-Card connector, CAN transceiver, USB and CAN Interface connectors.
The DEV-BF5xxDA-Lite Development Board with integrated Debug Agent is designed for evaluating and programming Blackfin based Core Modules from Bluetechnix. The integrated Debug Agent is a USB based debug interface which enables programming and debugging of the Blackfin Core Modules.The development boards provides all interfaces on dedicated connectors or expansion connectors. Extender boards can be plugged on topof the Development Board in order to enable additional interfaces. All Blackfin Core Modules have compatible connectors and can be replaced with each other. [more]
DEV-BF548-Lite - Blackfin Development Board
The DEV-BF548-Lite Development Board is designed as development and application board for the high performance CM-BF548 Core Module. It supports the USB OTG2.0 capability of the CM-BF548 Core Module and adds the feature of a 10/100Mbit industrial ethernet controller. The development boards provides all interfaces on dedicated connectors or expansion connectors. Extender boards can be plugged on top of the Development Board in order to provide additional interfaces. [more]
DEV-BF548DA-Lite - Blackfin Development Board
The DEV-BF548DA-Lite Development Board with integrated Debug Agent is designed as a development and application board for the high performance CM-BF548 Core Module. It supports the USB OTG2.0 capability of the CM-BF548 Core Module and adds the feature of a 10/100Mbit industrial ethernet controller. The development board provides all interfaces on dedicated connectors or expansion connectors. Extender boards can be plugged on top of the Development Board in order to enable additional interfaces. The integrated Debug Agent is a USB based debug interface which enables programming and debugging of the Blackfin Core Modules. [more]
EXT-BF548-EXP- Blackfin Development Board
The EXT-BF548-EXP Extender Board is an extender plug-on board for the DEV-BF548-Lite or the DEV-BF548DA-Lite Board to evaluate the CM-BF548 Core Modules. All connector pins of the expansion connector are available as solderable pads to facilitate the interconnection of cables or peripheral modules. An additional RS232 serial converter and respective connector is available as well. [more]
CM-BF537E Blackfin Starter Package
The Blackfin Starter Package is a low cost development package consisting of a DEV-BF5xxDA-Lite Development Board and a CM-BF537 Core Module. The DEV-BF5xxDA-Lite Board includes an on-board Debug Agent (USB JTAG) and enables programming and debugging Bluetechnix´ Blackfin Core Modules. [more]
CM-BF548 Blackfin Starter Package
The DEV-BF548DA-Lite Development Board with integrated Debug Agent is designed as a development and application board for the high performance CM-BF548 Core Module. It supports the USB OTG2.0 capability of the CM-BF548 Core Module and adds the feature of a 10/100Mbit industrial ethernet controller. The development boards provides all interfaces on dedicated connectors or expansion connectors. Extender boards can be plugged on top of the Development Board in order to enable additional interfaces. The integrated Debug Agent is a USB based debug interface which enables programming and debugging of the Blackfin Core Module. [more]
CM-BF527 Blackfin Starter Package
The Blackfin Starter Package is a low cost development package consisting of a DEV-BF5xxDA-Lite Development Board and a CM-BF527 Core Module. The DEV-BF5xxDA-Lite Board includes an on board Debug Agent (USB JTAG) and enables programming and debugging Bluetechnix´ Blackfin Core Modules. [more]
Freescale DEV-i.MX27 Development Package
The DEV-i.MX27 Development Package is an extendable development platform for the application development with Freescale´s i.MX27 processor. The combination of the Development Board with the CM-i.MX27C can be used as a reference design for low power mobile handheld devices. Extender boards can be plugged on top of the Development Board to provide additional interfaces. [more]
Freescale DEV-i.MX35 Development Package
The DEV-i.MX35 Development Package is an extendable development platform for the application development with Freescale´s i.MX35 processor. The combination of the Development Board with the CM-i.MX35C can be used as a reference design for low power mobile hand held devices. Extender boards can be plugged on top of the Development Board to provide additional interfaces. [more]
SBC-i.MX51 Single Board Computer
The Single-Board Computer SBC-i.MX51 is based on Freescale’s high-performance i.MX51 mobile platform, incorporating an ARM Cortex-A8CPU, an Image Processing Unit (IPUv3EX) and a Video Processing Unit(VPU). The IPUv3EX provides comprehensive support for the connectivity to displays and cameras. The VPU supports hardware encoding and decoding of MPEG-4, H.263 and H.264 standards. The board‘s memory capabilities (NAND Flash, DDR2) and numerous interfaces like Ethernet, HDMI, 4xUSBand USB-OTG turn the SBC-i.MX51 into the ultimate development board for future high-end embedded devices. [more]
EXT-BF5xx-EXP-TR - Blackfin Development Board
The EXT-BF5xx-EXP-TR Board is an extender board that can be plugged on all Blackfin based Development and Evaluation Boards. All connector pins of the expansion connector are available as solderable pads to facilitate the interconnection of cables or peripheral modules. An additional RS232 serial converter and a respective connector is available as well. [more]
Embedded Serial Busses Development Kit
This kit gives users an introduction to SPI and I2C serial buses. The development kit includes the powerful PCW Integrated Development Environment with compiler support for Microchip´s PIC® PIC10, PIC12 and PIC16 families and an ICD-U64 in-circuit programmer/debugger that supports C aware real time debugging. The prototyping board has two nodes and shares common I/O, memory and sensor components between two PIC16 MCUs. [more]
Embedded Serial Busses Development Kit
This kit gives users an introduction to SPI and I2C serial buses. The development kit includes the powerful PCW Integrated Development Environment with compiler support for Microchip´s PIC® PIC10, PIC12, PIC16 and PIC18 MCU families and an ICD-U64 in-circuit programmer/debugger that supports C aware real time debugging. The prototyping board has two nodes and shares common I/O, memory and sensor components between two PIC16 MCUs. [more]
USB DEVELOPMENT KIT
This kit enables users to begin USB interface development with Microchip´s PIC® PIC18 family. The development kit includes the powerful PCWH Integrated Development Environment with compiler support for Microchip´s PIC® PIC10, PIC12, PIC16 and PIC18 families and an ICD-U64 in-circuit programmer/debugger that supports C aware real time debugging. The prototyping board features the PIC18F4550 with an on-chip USB controller peripheral. PC software (with source) is included to communicate with the USB board. CCS provided examples include human interface applications and a high speed example emulating an oscilloscope. [more]
Embedded Ethernet Development kit for Microchip's ENC28J60
The Embedded Ethernet Development Kit supports development with Microchip´s ENC28J60 ethernet transceiver. This kit includes the powerful PCWH Integrated Development Environment with compiler support for Microchip´s PIC® PIC10, PIC12, PIC16 and PIC18 families and an ICD-U64 in-circuit programmer/debugger that supports C aware real time debugging. The prototyping board features a PIC18F4620 attached to a potentiometer, RS-232 level converter, push button and three LEDs. Drivers and example TCP/IP code for the ENC28J60 are included. [more]
CAN Bus Development Kit
Main Menu * Home * PIC MCU® C Compiler o C Aware IDE Features o Compiler Details o Device Support o Syntax and Functions o Examples Programs o C Aware Debugger o Compiler Comparison o Compiler Webinars o CCS Statistics o Cool Projects o Software Maintenance, Upgrades & User Licenses o Enhanced 8-bit Mid-Range Core * Development Kits * Programmers / Debuggers o MACH X Device Support o ICD-U64, Load-n-Go, and PRIME 8 Device Support o ICD Versions and Chip Compatibility o Connect a CCS Programmer to Your Hardware o CCS´s ICDs vs. Microchip´s ICDs o Troubleshoot Device Programmer Issues * OEM Modules * Support o Frequently Asked Questions o Customer Forums o Software Maintenance & Upgrades o Compiler Registration o Compiler Reference Manuals o Device Driver Datasheets o Books and Resources o Microchip Datasheets o www.mcuspace.com o CCS News * Downloads * Price List / Buy o Printable Price List (PDF) o Software Maintenance & Upgrades o Development Tools Selector o World [more]
PIC16F877A Development Kit
This development kit contains everything you need to begin development with Microchip´s PIC® PIC16877A MCU. Along with a prototyping board, it includes the powerful PCW Integrated Development Environment with compiler support for Microchip´s PIC® PIC10, PIC12 and PIC16 families and an ICD-U64 in-circuit programmer/debugger that supports C aware real time debugging. The prototyping board features a PIC16F877A attached to a potentiometer, RS-232 level converter, pushbutton, three LEDs, and an ICD connector. [more]
Development Platform for CSB737 SAM9263 SOM
The KIT737, designed, developed and manufactured by Cogent Computer Systems, Inc., is a Development Platform that supports the CSB737 (Atmel SAM9263) SODIMM module as well as up to three CSB908xx series I/O Modules. Additionally, the KIT737 has a CSB909xx compatible 41-pin connector for additional LCD Display options. The KIT737 also includes: microSD Socket; I2S Codec with Headphone Amp; Dual USB to Serial UART/FIFO IC, a CPU Address/Data Expansion Header; and a 4.3" 480 x 272 LCD with touch. [more]
TI OMAP3530 SODIMM System On a Module
The CSB740 Single Board Computer is a highly integrated, SODIMM SOM that features a 600Mhz ARM Cortex-A8 based OMAP3530 with On-Chip LCD I/F and 2D/3D Graphics Engine, 480MBit USB Host/Device, I2S Audio I/F, Dual 4-Bit SDIO, Three UARTS and Dual SPI. Additional board features include Low Power 10/100 Ethernet Controller and On-Board 3V power supply. [more]
Freescale i.MX31/L SODIMM System On a Module
The CSB733 Single Board Computer is a highly integrated, SODIMM SOM that features a 532Mhz ARM1126EJ-S based i.MX31 with On-Chip LCD I/F and 2D/3D Graphics Engine, 480MBit USB Host, 480MBit USB Device, I2S Audio I/F, Dual 4-Bit SDIO, Four UARTS and Dual SPI. Additional board features include Low Power 10/100 Ethernet Controller and On-Board 3V power supply. [more]
Atmel AT91SAM9263 SODIMM System On a Module (SOM)
The CSB737 Single Board Computer is a highly integrated, SODIMM SOM that features a 200Mhz ARM926EJ-S based AT91SAM9263 with On-Chip LCD I/F and 2D Graphics Engine, Compact Flash I/F, USB Device, Dual USB Host, AC97 Audio I/F, 4-Bit SDIO, Four UARTS and Dual SPI. Additional board features include Low Power 10/100 PHY, 8MByte PSRAM Frame Buffer via 2nd Bus Interface and on-Board 3.3V power supply. [more]
CY3210-MINIPROG1 Evaluation Kit
The CY3210-MiniProg1 is an inexpensive evaluation kit that allows you toprogram PSoC(R) devices using the MiniProg programming unit. A MiniEvalPCB is also included in the kit for your use. [more]
CY3214-PSoCEvalUSB Evaluation Board
This PSoC(R) evaluation kit features a development board for theCY8C24794-24LFXI PSoC device." Special features of the board includeboth USB and capacitive touch sense development and debugging support.The evaluation board also includes an LCD module, Potentiometer, LEDs,an enunciator, and plenty of bread boarding space to meet all of yourevaluation needs. The PSoCEvalUSB board features an on-chip debugger andcan be connected directly to an ICE-Cube (available in the CY3215-DK)for full-featured, in-circuit emulation and debuggi [more]
CY3218-CAPEXP3 CapSense Express™ Kit (Up to 4 I/O for Buttons)
The CY3218-CAPEXP3 CapSense Express evaluation kit enables designers toreplace mechanical buttons by implementing touch sensing designs inminutes with the newest CapSense Touch Sensing Family, CapSenseExpress. With Cypress´s PSoC Express(TM) visual embedded system designtool and CapSense Express configuration tool, designers configure,monitor, and tune up to 4 I/Os for buttons, LEDs, and other generalpurpose I/Os over I2C in a real time using a graphical user interface. [more]
CY3218-CAPEXP2 CapSense Express(™ Kit (Up to 10 I/O for Sliders)
The CY3218-CAPEXP2 CapSense Express evaluation kit enables designers toreplace mechanical sliders by implementing touch sensing designs inminutes with the newest CapSense Touch Sensing Family, CapSenseExpress. With Cypress´s PSoC Express(TM) visual embedded system designtool and CapSense Express configuration tool, designers configure,monitor, and tune up to 10 I/Os for sliders, LEDs, and other generalpurpose I/Os over I2C in a real time using a graphical user interface. [more]
CY3210 PSoC Evaluation Kit
This PSoC Evaluation Kit features an evaluation board and MiniProgprogramming unit. The evaluation board includes an LCD module,Potentiometer, LEDs, and plenty of breadboarding space to meet all ofyour evaluation needs. The MiniProg programming unit is also includedwith the kit and will program PSoC devices directly on the evaluationboard, or on other boards via a 5-pin header. This programming unit issmall and compact, and connects to a PC via a provided USB 2.0 Cable. [more]
CY3218-CAPEXP1 CapSense Express™ Kit (Up to 10 I/O for Buttons)
The CY3218-CAPEXP1 CapSense Express evaluation kit enables designers toreplace mechanical buttons by implementing touch sensing designs inminutes with the newest CapSense Touch Sensing Family, CapSenseExpress. With Cypress´s PSoC Express(TM) visual embedded system designtool and CapSense Express configuration tool, designers configure,monitor, and tune up to 10 I/Os for buttons, LEDs, and other generalpurpose I/Os over I2C in a real time using a graphical user interface. [more]
The Proximity Detection Demo Kit allows quick and easy demonstration of aPSoC CapSense-enabled device (CY8C21434) to accurately sense theproximity of a hand or finger along the length of a wire antenna. Thekit also includes the I2C-USB Bridge, which allows hardware and softwaredebugging of PSoC applications by seamlessly connecting your PC´s USBport to your application´s I2C interface. [more]
I2C-USB Bridge Kit
The I2C-USB Kit allows one to test, tune and debug hardware and softwareof a PSoC application by bridging the USB port to I2C. Populated withthe CY8C24894 PSoC device. A wide variety of devices can be connected tothe PC using this bridge. Among them are: EEPROMs, realtime cLocks,ADC/DAC converters, LCD displays, regulated DC/DC converters, portexpanders and many other devices incorporating the I2C interface. Thenumber of devices that can be connected is constrained only by the I2Caddress limit and physical ability of the I2C bus. [more]
CY3270 PSoC FirstTouch Starter Kit
The CY3270 PSoC FirstTouch Starter Kit provides a quick, easy, andaffordable way to evaluate the integration, flexibility and realmixed-signal programmability of PSoC programmable system-on-chips.Without writing or debugging a single line of C or assembly code, youcan experience the power of PSoC devices performing the following fourout of the box designs with two thumb-drive form factor boards: [more]
CY3269N Lighting Starter Demonstration Kit
Cypress Semiconductor´s CY3269N Lighting Starter Demonstration Kitleverages two key Cypress technologies for development of intelligentLED lighting fixtures. At the simple touch of a finger, users canilluminate anything from an entire room to a large architecturallighting display with warm, neutral, or cool white light of variablecolor temperature. Users can create rich and vibrant colored light toset moods, accents, and customize the overall feel of any venue withlittle effort. [more]
CY3271 FirstTouch Starter Kit
This intuitive starter kit allows you to evaluate the PSoC programmablesystem-on-chip and CyFi Low-Power RF in CapSense touch-sensing,temperature sensing, and light-sensing applications. [more]
CY3267 PowerPSoC Lighting Evaluation Kit
The CY3267 PowerPSoC(tm) Lighting Evaluation Kit enables designers toevaluate Cypress´ PowerPSoC family of devices and demonstrates theirability to create scalable LED management solutions. The PowerPSoCdevices feature high performance power electronics including 1A, 2 MHzpower FETs, hysteretic controllers, current sense amplifiers, andPrISM(tm)/PWM modulators to create a complete solution for LED powermanagement. Right out of the box, the CY3267 Kit can be used to evaluatePowerPSoC´s ability to drive 4 LED channels (Red, Green, Blue andAmber) at the desired color and brightness output. [more]
CY3268 PowerPSoC Lighting Starter Kit
The CY3268 PowerPSoC™ Lighting Starter Kit demonstrates the ability ofPowerPSoC to create scalable LED management solutions and enablesdesigners to evaluate PowerPSoC. The PowerPSoC family of devicesfeatures high performance power electronics including 1A, 32V ratedpower FETs, hysteretic controllers, current sense amplifiers, and PrISM™technology to create a complete solution for LED power management. [more]
CY8CKIT-003 PSoC® 3 FirstTouch™ Starter Kit
The PSoC® 3 FirstTouch™ Starter Kit is designed to get you acquaintedwith Cypress’s PSoC programmable system-on-chip design methodology andarchitecture. This full-featured starter kit ships with an array ofsensors, I/O’s, projects, and software to allow you to evaluate PSoC andsee what values the solution can provide you [more]
CY8CKIT-009 PSoC® CY8C38 Family Processor Module Kit
The PSoC® CY8C38 Family Processor Module is designed to evaluate andexperiment with Cypress’s PSoC 3 programmable system-on-chip designmethodology and architecture. This processor module can be used inconjunction with the PSoC Development Kit (CY8CKIT-001) to createdesigns utilizing on-board DVK resources or compatible expansion boards.This kit provides you with an additional processor module to use withdifferent projects. [more]
CY3280-20x66 Universal CapSense Controller Kit
The CY3280-20X66 CapSense Controller Kit is designed for easy prototyping and debug of 20xx6ACapSense Family designs with pre-defined control circuitry and plug-in hardware. Programming hardware is included as well as an I2C-to-USB bridge for tuning and data acquisition. This module connects to any CY3280 Universal CapSense Module Board. [more]
Cypress’s PSoC programmable system-on-chip architecture gives you thefreedom to not only imagine revolutionary new products, but thecapability to also get those products to market faster than anyoneelse. Discover how 736 segment LCD drive, configurable LCD pinselection, the ability to drive a 5V display on 0.5V of input and theability to drive multiple displays on one PSoC device can translate tothe ultimate in design freedom, lower BOM costs and new productdifferentiators with this easy to use evaluation kit. [more]
CY8CKIT-007 PSoC® 3 Precision Analog Voltmeter Demo Kit
Cypress’s PSoC programmablesystem-on-chip architecture gives you the freedom; to not only imaginerevolutionary new products, but the capability to also get thoseproducts to market faster than anyone else. Explore PSoC 3’s precisionanalog capabilities through the on board 20-bit Delta Sigma ADC used tomeasure voltage ranges between -30 V and 30 V. [more]
LPCXpresso Value Pack
With the LPCXpresso Value Pack we have taken the next step to makeLPCXpresso development as easy as possible. Embedded Artists offers an LPCXpresso Value Pack comprising: a 10-pin to 20-pin JTAGAdapter designed to convert between the ARM mini-JTAG connector(10-pin) and the standard ARM JTAG connector (20-pin).
The LPCXpresso base board is ideal when you need to do prototyping work or when you wish to learn more about a certain microcontroller. It works with all the LPCXpresso target boards and with the mbed module. The base board is loaded with different peripherals. [more]
LPC2148 USB QuickStart Board
Embedded Artists´ LPC2148 CAN QuickStart Board lets you get up-and-running quickly with NXP´s ARM7TDMI LPC213x microcontrollers. The small form factor board offers many unique features that ease your development. Includes Prototype board [more]
LPCXpresso Prototype Board
The Prototype board provides you with an easy-to-use expansion area for experiments. The Prototype board can be used for education purposes as well as for experiment and prototype projects. The Prototype board can be used together with the LPCXpresso board or with the mbed module. [more]
LPC2468 Developer's Kit
Embedded Artists´ LPC2468 Developer´s Kit lets you get up-and-running quickly with the LPC2468 OEM Board. The LPC2468 OEM Board is equipped with NXP´s ARM7TDMI-S based LPC2468 microcontroller suitable for multipurpose communication applications. [more]
LPC2103 Education Board
Embedded Artists´ LPC2103 Education Board is the smallest of our education boards and a good start to get to know the NXP LPC2xxx family in general and the LPC2103 in particular. The board contains interesting on-board peripherals that are useful for experiments. The experiments can be further expanded via the expansion connector. The board can be used for education purposes as well as for experiment and prototype projects. [more]
LPC2148 Education Board
Embedded Artists´ LPC2148 Education Board is the perfect board to start learning about ARM7 microcontrollers. The board contains many interesting and useful experiments. [more]
LPC2129 CAN QuickStart Board
Embedded Artists´ LPC2129 CAN QuickStart Board lets you get up-and-runningquickly with NXP´s ARM7TDMI LPC2129 microcontroller. The small form factorboard offers many unique features that ease your development.Includes the Prototype board [more]
LPC2106 RS232 QuickStart Board
Embedded Artists´ LPC2106 RS232 QuickStart Board lets you get up-and-running quickly with NXP´s ARM7TDMI LPC2106 microcontroller. The small form factor board offers many unique features that ease your development. Includes prototype board. [more]
Prototype Board for QuickStart Boards
Prototype board for LPC2106 RS232, LPC2129 CAN, LPC2138, and LPC2148 USB QuickStart Boards (headers for each different board type). [more]
LPC2478 Developer's Kit
Embedded Artists´ LPC2478 Developer´s Kit lets you get up-and-running quickly with the LPC2478 OEM Board. The LPC2478 OEM Board is equipped with NXP´s ARM7TDMI-S based LPC2478 microcontroller suitable for a wide range of applications that requires advanced communication and high quality graphic displays. The Kit is perfect for running uClinux with its large on-board RAM and Flash, network and graphics capabilities. [more]
LPC3152 Developer's Kit
Embedded Artists´ LPC3152 Developer´s Kit lets you getup-and-running quickly with the LPC3152 OEM Board. The LPC3152 OEM Board is equipped with NXP´s ARM926EJ-S based LPC3152 microcontroller suitable for a wide range of applications requiring low power consumption, high performance and flexible USB connectivity. [more]
LPC3141 Developer's Kit
Embedded Artists´ LPC3141 Developer´s Kit lets you getup-and-running quickly with the LPC3141 OEM Board. The LPC3141 OEM Board is equipped with NXP´s ARM926EJ-S based LPC3141 microcontroller suitable for a wide range of applications requiring low power consumption, high performance and flexible USB connectivity.
Embedded Artists´ LPC2478 OEM Board is equipped with NXP´s ARM7TDMI-S based LPC2478 microcontroller suitable for a wide range of applications that requires advanced communication and high quality graphic displays.
Embedded Artists´ LPC3250 Developer´s Kit lets you get up-and-running quickly with the LPC3250 OEM Board. The LPC3250 OEM Board is equipped with NXP´s ARM926EJ-S based LPC3250 microcontroller suitable for applications that require high performance, high integration, and low power consumption. The board can be used in OEM applications, as well as for education purposes, experiment, and prototype projects. [more]
LPC3250 OEM Board
Embedded Artists´ LPC3250 OEM Board is equipped with NXP´s ARM926EJ-S based LPC3250 microcontroller suitable for applications that require high performance, high integration,and low power consumption.
The EFM32 Gecko Development Kit is a platform for rapid prototyping of our ultra low power microcontroller applications. [more]
EFM32G2xx Gecko Development Kit
The EFM32 Gecko Development Kit is a platform for rapid prototyping of our ultra low power microcontroller applications. [more]
EFM32 Gecko Starter Kit
The EFM32 Gecko Starter Kit is a platform for rapid prototyping of our ultra low power microcontroller applications. [more]
i.MX25 Product Development Kit
Freescale´s new feature packed i.MX25 development kit builds on the success and extensive software code base of the i.MX31, i.MX27 and i.MX35 PDK´s and gets this comprehensive kit into the hands of developers for under $1000. Based on a powerful and well-proven ARM926EJ-S™ core, the i.MX25 PDK delivers exceptional performance without sacrificing on battery life, and for wall-powered devices, will help you to design products that meet today´s demands for energy efficiency. [more]
DEMO9S08QD4 : DEMONSTRATION Board
The DEMO9S08QD4 is a demonstration board for the MC9S08QD4 8-bit microcontroller. Application development is quick and easy with the integrated programmer/debugger tools (USB-BDM) and software (CodeWarriorTM ) included. [more]
MPC8308-RDB Reference Platform
The MPC8308RDB reference platform is ideal for hardware and software development for applications including consumer printing, wireless access points, industrial control and factory automation. [more]
MPC8323E Modular Development System
The MPC8323E Modular Development System (MDS) is designed to aid hardware and software developers using the PowerQUICC II Pro MPC8323E family. The MPC8323E MDS can be assembled using the following hardware modules: The MPC8323E MDS Processor Board (P/N MPC8323E-MDS-PB), the PowerQUICC Platform I/O Board, the PowerQUICC PMC to PCI module, and the PowerQUICC Quad OC-3 ATM and PowerQUICC T1 plug-in cards. The system also allows for an optional PCI Expansion module interface. The Platform I/O board (AdvancedTCA form factor with 4 PMC slots), along with the expansion modules, provides increased development capabilities. For example: [more]
MPC8360EA Modular Development System
The MPC8360EA Modular Development System (MDS) is designed to aid hardware and software developers using the PowerQUICC II Pro MPC8360EA family. [more]
DEMO9RS08KA2 : Demonstration Board
The cost effective KA2’s demoboard is the first development tool supporting our new RS08 architecture. Connect, load, evaluate. [more]
M53015 Evaluation Board
An evaluation and development system for the MCF5301x family supporting all peripheral functions andcommonly used memory configurations, includes a Linux BSP and a voice commandrecognition demo. [more]
i.MX31 Platform Development Kit - Windows CE Preloaded
The i.MX31 PDK, with Smart Speed™ technology, is a completely integrated hardware and software solution that simplifies product development so you can focus on your critical differentiation needed for market success. Reduce development time, and design products that have power to spare, even when running multiple applications simultaneously. Receive stellar image and graphic performance in a system design that dramatically reduces power consumption. [more]
DEMO9S08QG8 : MC9S08QG8 Demo Board
The DEMO9S08QG8 is a demonstration board for the MC9S08QG8 microcontroller. Development of application code is quick and easy with the integrated USB-to-BDM interface, CodeWarriorTM Development Studio, and software examples. A 32-pin connector allows connecting the DEMO9S08QG8 board to an expanded evaluation environment [more]
DEMO9S08AW60E : Demonstration Board
The DEMO9S08AW60E is a demonstration board for the MC9S08AW60 microcontroller. Development of application code is quick and easy with the integrated USB-to-BDM interface, CodeWarrior™ Development Studio, and software examples. [more]
Demonstration Board for 56F8013 Digital Signal Controller
The 56F8013 Demonstration Board is an evaluation module board that includes a 56F8013 digital signal controller, RS-232 interface, user LEDs, user pushbutton switches and a daughter card connector. The daughter card connector allows signal monitoring and expandability of user features. [more]
MC9S08LC60 Demonstration Board
The cost effective DEMO9S08LC60 demonstration kit contains everything a designer needs to develop and evaluate application code. The integrated USB multilink allows a designer to communicate with the board and target device with only a USB cable. Included custom LCD glass demonstrates the capabilities of all LCD segments in "an end-application format" [more]
Demonstration Board for 56F8014 Digital Signal Controller
The 56F8014 Demonstration Board is an evaluation module board that includes a 56F8014 digital signal controller, RS-232 interface, user LEDs, user pushbutton switches and a daughter card connector. The daughter card connector allows signal monitoring and expandability of user features. [more]
MC56F8037EVM : DSC Evaluation Board
The MC56F8037EVM evaluation module allows easier and faster development for 56F802x and 56F803x digital signal controllers. The module includes an MC56F8037 digital signal controller, RS-232 interface, user LEDs, user push button switches, and a daughter card connector. [more]
Evaluation Kit for MC56F832x and MC56F812x Digital Signal Controllers
The MC56F8323EVM kit is a low-cost kit that contains everything you need to quickly evaluate the features and capabilities of the MC56F8322 and MC56F8323 digital signal controllers silicon and tools. It also provides an efficient, cost-effective vehicle for hardware and software development. [more]
Evaluation Kit for Digital Signal Controllers
The MC56F8367EVM kit is a low-cost kit that contains everything you need to quickly evaluate the features and capabilities of the MC56F8145-67 and MC56F8345-67 controllers silicon and tools. It also provides an efficient, cost-effective vehicle for hardware and software development. It can be used alone, or in conjunction with Freescale´s broad range of modular motion control development hardware. [more]
QUICCstart MPC8343E Evaluation System
With the MPC8343E QUICCstart Evaluation System you are getting a cost-effective, high-performance platform for developing advanced network enabled applications. As part of the PowerQUICC II Pro Family, The MPC8343E is designed to provide a cost-effective, highly integrated control processing solution that addresses the emerging needs of networking, communications and pervasive computing applications. [more]
MPC8313E-RDB Reference Platform
The MPC8313E-RDB reference platform is ideal for hardware and software development for cost-optimized networking applications. The cost-effective MPC8313E communications processor family meets the requirements of several small office/home office (SOHO), printing, IP services and industrial control applications. [more]
QE128 Evaluation Board
The EVBQE128 Evaluation Board has been designed for the evaluation, demonstration and debugging of the Freescale Flexis QE128 Microcontrollers (MC9S08QE128 and MCF51QE128). The EVBQE128 can be used as a standalone application or can be controlled by a host PC via its built-in microDART™ interface. [more]
QE128 Demonstration Board
The DEMOQE128 is a low-cost development system designed for demonstrating, evaluating, and debugging the Freescale MC9S08QE128 and MCF51QE128 microcontrollers. It´s Multilink circuitry on the DEMOQE128 board allows the processor on the DEMOQE128 to be debugged and programmed via USB from the PC. In addition, the demo board can be powered using the USB bus. [more]
MC9S08QE128 Demonstration Board
The DEMOQE128 is a low-cost development system designed for demonstrating, evaluating, and debugging the Freescale MC9S08QE128 and MCF51QE128 microcontrollers. The board supports two interchangeable plug-in daughter cards to quickly evaluate the 8-bit S08 and 32-bit ColdFire V1 QE128 microcontrollers. [more]
EVB9S08DZ60: S08D Family Evaluation Board
The DZ60 evaluation board allow users to program and debug advance application code with expanded I/O functions, peripherals and large prototype areas. It can be used as a stand alone application or via its built-in USB-to-BDM interface. [more]
DEMO9S08DZ60: S08D Family Demonstration board
The DEMO9S08DZ60 is a demonstration board for the MC9S08DZ60 microcontroller. Application development is quick and easy with the integrated USB-BDM, sample software tools, and examples. An optional BDM_PORT port is also provided to allow use of a BDM_PORT cable. Two, 40-pin connectors provide access to all IO signals on the target MCU. [more]
DEMOAC: Flexis™ AC Family Demo Board
The DEMOAC provides a platform supporting a line of Freescale microcontrollers which are part of the Flexis Continuum. Target microcontrollers mount on plug-in modules to support quickly changing the target MCU. [more]
DEMO9S08SH8: Demonstration Board
The DEMO9S08SH8 is a demonstration board for the for the S08SH8 and the S08SG Freescale microcontrollers. Application development is quick and easy with the integrated USB-BDM interface, together with CodeWarriorior™ Development Studio and software examples. An optional BDM_PORT port is also provided to allow use of a BDM_PORT cable. Two, 40-pin connectors provide access to all IO signals on the target MCU. [more]
DEMOJM: S08JM Demonstration board
DEMOJMSKT is a cost-effective kit targeting quick microcontroller evaluation. The kit includes a DEMOJM base board and a daughter card with a 64 LQFP socket supporting the MC9S08JM60. The included kit can be used to demonstrate the features of the MC9S08JM60 device, starting with the on-chip USB 2.0 full-speed device controller and transceiver. [more]
DEMO9S08AC60E: Demo Board for S08AC
The DEMO9S08AC60 is a demonstration board for the S08AC microcontroller family. Development of application code is quick and easy with the integrated USB-to-BDM interface, CodeWarrior™ Development Studio, and software examples. [more]
DEMO9S08SG32: Demonstration board for the MC9S08SG32
The DEMO9S08SH32/SG32 is a demonstration board for the MC9S08SH and MC9S08SG microcontrollers. Application development is quick and easy with the integrated USB-BDM, sample software tools, and examples. An optional BDM_PORT port is also provided to allow use of a BDM_PORT cable. Two, 40-pin connectors provide access to all IO signals on the target MCU. [more]
DEMO9S08SG8: Demonstration board for the MC9S08SG8/4
The DEMO9S08SH8/SG8 is a demonstration board for the MC9S08SH and MC9S08SG microcontrollers. Application development is quick and easy with the integrated USB-BDM, sample software tool, and examples. An optional BDM_PORT port is also provided to allow use of a BDM_PORT cable. Two, 40-pin connectors provide access to all I/O signal on the target MCU. [more]
MC9S08RG60 Demo Board
The DEMO9S08RG60 demonstration board allows a designer to develop and evaluate microcontrollers from the S08RG, RC, RD, or RE Family. Development of applications is quick and easy with the included wall plug, DB9 serial cable, sample software tools, examples, and debug monitor. The DEBUG port is provided for development tool application and is compatible with HCS08BDM interface cables and software. A 40-pin connector allows connecting the DEMO9S08RG60 module to an expanded evaluation environment. [more]
DEMO9RS08KA8 Demonstration board
The DEMO9RS08KA8 Demonstration board has been designed for the evaluation, Demonstration and the debugging of the Freescale RS08KA8 microcontroller. DEMO9RS08KA8/4 board´s built-in circuitry and USB programmer interface included reduces hardware interface development time and allows faster code evaluation. [more]
QE8 Demostration board
DEMO9S08QE8 is a cost-effective board targeting quick microcontroller evaluation. The board includes a DEMOQE baseboard and a DC9S08QE8 daughter card. In combination, they can be used to highlight the key features on the MC9S08QE8 device. The board also includes a power terminal to measure the ultra-low power consumption of the MC9S08QE8 device. [more]
Evaluation System for MCF51JM128 Flexis USB Family
Full-featured evaluation system for the ColdFire JM128 Flexis USB family. This evaluation system supports USB host, device and OTG as well as integrated CAN. [more]
MPC8349E Modular Development System
The MPC8349E Modular Development System (MDS) is designedto aid hardware and software developers using thePowerQUICC II Pro MPC8349E family. The MPC8349E MDS iscomprised of three discrete hardware modules: TheMPC8349E Processor Board, the PowerQUICC Platform I/OBoard and the PowerQUICC PMC to PCI module. The system alsoallows for optional USB and PCI Expansion module interfaces. [more]
MPC837xE Modular Development System
The MPC837x Modular Development System (MDS) assists designers by providing a platform for system development based on the MPC837xE family. This platform enables designers to bring up silicon, develop new software applications and do performance benchmarking. It can also be used for customer evaluation and demonstration purposes in a wide variety of applications, such as networking, printing and storage. [more]
QUICCStart MPC8555E Evaluation System
The Freescale QUICCstart MPC8555 Evaluation System is a powerful, low-cost platform that allows a developer to rapidly design and execute a project with the Freescale MPC8555E PowerQUICC III processor, reducing time-to-market and increasing reliability. [more]
MPC8541ECDS: Customer Development System for MPC8541E
The MPC8560ADS board is designed to aid hardware and software developers of the PowerQUICC™ III family by providing an evaluation platform for MPC85XX derivatives in the 783-pin FC-PBGA package. The MPC8560ADS board supports the MPC85XX processors. The MPC8560ADS board has 64MB of SDRAM attached to the 60x bus (soldered on board) and an 8MB Program Flash SIMM (supports up to 32MB). The on-board interfaces include JTAG/COP, Dual UART, two 100/10-Base-T Fast Ethernets, and a 155 Mbps ATM UNI with optical interface. [more]
MPC8544E: PowerQUICC III Processor
The MPC8544/E PowerQUICC™ III is designed to offer the unique combination of high performance, exceptional integration and lower overall power consumption required for networking, communications and industrial control applications. [more]
MPC8555 Configurable Development System
The CDS system is designed to aid hardware and software developers of the PowerQUICC™ III family by providing an evaluation platform for MPC8555E, and MPC8541E derivatives in the 783-pin FC-PBGA package. The CDS system is preloaded with U-boot and Linux BSP, it has 256MB DDR SDRAM DIMM module, 2 banks of Flash 64Mb each. The on-board interfaces include JTAG/COP, USB, Dual UART, Dual PCI, 10/100/1000 Base-T Fast Ethernets interface, and a 155 Mbps ATM UNI with optical interface. [more]
EVB9S08DZ60_128: S08D Family Evaluation Boards
The EVB9S08DZ60/128 evaluation board allow users to program and debug advance application code with expanded I/O functions, peripherals and large prototype areas. It can be used as a stand alone application or via its built-in USB-to-BDM interface. [more]
MPC8568EMDS: PowerQUICC III Modular Development System
The MPC8568E Modular Development System is designed for hardware and software developers using the MPC8568E PowerQUICC™ III family to accelerate development and testing, and improve time to market. [more]
Customer Development System for MPC8548E
The configurable development system (CDS) supports a wide range of Freescale processors built on Power Architecture technology such as the MPC8548E family of processors including the MPC8548, MPC8547E, MPC8545E and MPC8543E. The system is primarily a development and evaluation system, which is enhanced by its modular design, making it highly configurable. [more]
HPCN-MPC8641D Development Platform
HPCN is a high-performance computing, evaluation and development platform supporting the MPC8641D dual-core processor built on Power Architecture technology, as well as the MPC8641 single-core version. [more]
MPC8560ADS: Application Development System for MPC8560
The MPC8560ADS board is designed to aid hardware and software developers of the PowerQUICC III family by providing an evaluation platform for the MPC8560 in the 783-pin FC-PBGA package. [more]
i.MX27 Lite Development Kit
Building on the success of low-cost, high-performance application development kits, Freescale introduces the i.MX27 Lite Kit. Once again, Developed in Logic Product Development and Freescale have worked together to deliver a product-ready software and hardware platform for OEMs, ODMs, IDHs and independent developers and a price point that´s quite appealing. [more]
QE32 Demonstration board
The DEMO9S08QE32 is a low-cost development system designed for demonstrating, evaluating, and debugging the Freescale MC9S08QE32 microcontroller. P&E’s Embedded Multilink circuitry on the DEMO9S08QE32 board allows the processor to be debugged and programmed via USB from the PC. In addition, the demo board can be powered using the USB bus. [more]
Integrated media and communications processor development system
The MPC8536E Development System (MPC8536DS) is ideal for hardware and software development for embedded applications. It leverages Freescale’s highly integrated MPC8536E processor, built on Power Architecture® technology, and leading-edge external components. [more]
DEMO9S08LA8 DEMO Board
The cost effective DEMO9RS08LA8 demonstration kit contains everything a designer needs to develop and evaluate application code. The integrated USB multilink allows a designer to communicate with the board and target device with only a USB cable. [more]
DEMO9S08LL16 DEMO Board
The cost effective DEMO9S08LL16 demonstration kit contains everything a designer needs to develop and evaluate application code. The integrated USB multilink allows a designer to communicate with the board and target device with only a USB cable [more]
S08JM16 Demo Board
DEMO9S08JM16 is a cost-effective demonstration kit enabling quick MC9S08JM16 evaluation. The kit includes a DEMOJM base board and a MC9S08JM16 daughter card and can be used to demonstrate the features of the MC9S08JM16 device, starting with the on-chip USB 2.0 full-speed device controller and transceiver. The USB features are supported in hardware through a dedicated USB mini-AB connector and in software through the included complimentary USB-LITE stack by CMX. Built-in USB-BDM circuitry is available for debugging and programming, serial communication and simple logic analyzer. [more]
MPC837xE Modular Development System
The MPC837x Modular Development System (MDS) assists designers by providing a platform for system development based on the MPC837xE family. This platform enables designers to bring up silicon, develop new software applications and do performance benchmarking. It can also be used for customer evaluation and demonstration purposes in a wide variety of applications, such as networking, printing and storage. [more]
MPC82xx Family Application Development System
The PQ2FADS-VR boards are designed to aid hardware and software developers of the PowerQUICC II family by providing an evaluation platform for MPC82xx derivatives in the 516-pin PBGA (VR or ZQ) packages. The PQ2FADS-VR board supports the MPC8250, MPC8270 and MPC8275. [more]
i.MX23 Evaluation Kit
The i.MX23 Evaluation Kit (EVK) is price-effective without compromising performance and allows customers to ultimately define and demonstrate the personality of their next great product. The EVK supports all the features of the device in a small, single-board design and an optional LCD add-on module to enable developers’ a complete development platform at a low price point of less than $600 USD. [more]
MC56F8006 Digital Signal Controller Demonstration Board
MC56F8006DEMO is a cost-effective board targeting quick digital signal controller (DSC) evaluation, demonstration and debugging of the Freescale MC56F8006VLF digital signal controller. The board is equipped to handle USB communication right out of the box. MC56F8006 demo board has a series of 6 leds connected to PWM channels in order to monitor signals and has a Reset and 2 IRQ switches. [more]
DEMO9S08JS16
The DEMO9S08JS16 is a cost-effective demonstration kit enabling quick MC9S08JS16 evaluation. [more]
S08LG32 demonstration board
The DEMO9S08LG32 is a demonstration board for the MC9S08LG32 8-bit microcontroller. Application development is quick and easy with the integrated USB-BDM, sample software tools and examples. An optional BDM_PORT port is also provided to allow use of a BDM_PORT cable. One, 80-pin connector provides access to all IO signals on the target MCU. [more]
TWR-MCF51CN-KIT: Low-Cost Development Kit for MCF51CN128
The TWR-MCF51CN-KIT is a low-cost development tool for the MCF51CN128 Ethernet microcontroller. This kit is part of the Freescale Tower System, a modular, reconfigurable development platform that allows designers to get to market faster with packaged evaluation boards, tools and runtime software. [more]
MPC8569E Modular Development System (MDS)
The MPC8569E Modular Development System (MDS) is designed for hardware and software developers using the MPC8569E PowerQUICC III processor to accelerate development, testing and improve time to market. [more]
S08MP16 Demonstration board
The DEMO9S08MP16 is a low cost development system supporting MC9S08MP16 Microcontrollers. P&E’s Embedded Multilink circuitry on the DEMO9S08MP16 board allows the on-board processor connected to the DEMO9S08MP16 to be debugged and programmed via USB from a PC. In addition, the demo board can be powered using the USB bus. [more]
Tower System Coldfire® V2 MCF5225X Connectivity Module
The TWR-MCF5225X-KIT is a low-cost development tool for the MCF5225X V2 ColdFire® devices. Offered as a kit or as a standalone board, the TWR-MCF5225X is part of the Freescale Tower System, a modular, reconfigurable development platform that allows designers to get to market faster with packaged evaluation boards, tools and runtime software. [more]
TWR-S08LL64 Tower System 8-bit Segment LCD Module
The cost effective TWR-S08LL64-KIT development tool is part of the Tower System and features the MC9S08LL64 segment LCD controller. It provides everything a designer needs to develop and evaluate application code. The integrated OSBDM allows a designer to communicate with the board and target device with only a USB cable and the board highlights the MCU´s low power features. [more]
i.MX51 Evaluation Kit
Freescale delivers the cost-effective i.MX51 evaluation kit, allowingcustomers to develop, debug and demonstrate their next great product withoutcompromising performance. [more]
5.7” VGA Touch Screen LCD Kit
The DK-57VTS-LPC3250 is optimized to savedevelopment time in typical embedded control applications. The modular formatuses a base Carrier Board, a core CPU SOMDIMM Module and an LCD Carrier Board. [more]
LPC2478 Touch Screen LCD Kit
The DK-35TS-LPC2478 is optimized to savedevelopment time in typical embedded control applications. The modular formatuses a base Carrier Board, a core CPU SOMDIMM Module and an LCD Carrier Board. [more]
5.7” VGA Touch Screen LCD LPC2478 Kit
The DK-57VTS-LPC2478 is optimized to savedevelopment time in typical embedded control applications. The modular formatuses a base Carrier Board, a core CPU SOMDIMM Module and an LCD Carrier Board.The base Carrier Board includes expansion connectors for added flexibility and arange of configurations. [more]
5.7” QVGA Touch Screen LCD Kit
The DK-57TS-LPC3250 is optimized to savedevelopment time in typical embedded control applications. The modular formatuses a base Carrier Board, a core CPU SOMDIMM Module and an LCD Carrier Board. [more]
SOMDIMM-LPC3250
The SOMDIMM-LPC3250 Module provides a quick and easy solution for implementingan ARM926EJ-S based design by providing the basic functions necessary for aproduct on an easy to use SOMDIMM module. [more]
LPC2478 Touch Screen LCD Ki
The DK-57TS-LPC2478 is optimized to savedevelopment time in typical embedded control applications. [more]
SOMDIMM-LPC2478 – CPU Module
The SOMDIMM-LPC2478 Module provides a quick and easy solution for implementingan ARM7TDMI-S based design by providing the basic functions necessary for aproduct on an easy to use SOMDIMM module. [more]
LPC3180-DEV-KIT
The LPC3180 Development Kit provides a stableplatform for building powerful user applications within the ARM9 Linuxenvironment. [more]
Easy Kit XE167F
Easy Kit Hardware, Getting Started, first 3 Steps to setup you Hardware, install the Tools and Debug the first Program, Technical Documentation: e.g. User manuals (System unit and Peripheral unit), Architecture manual,Application notes, Errata sheets, Data Sheets, Board Documentation (pdf-version),, Evaluation Versions of Development Tools: e.g. Compiler, Debugger, DAvE Mother System v2.1 and Derivative Implementation Files (DIP), Memtool (Flash Programming Tool), Training Documentation, Demo Programs, Hands On Training (HOT) [more]
Easy Kit XE164F
Easy Kit Hardware, Getting Started, first 3 Steps to setup you Hardware, install the Tools and Debug the first Program, Technical Documentation: e.g. User manuals (System unit and Peripheral unit), Architecture manual, Application notes, Errata sheets, Data Sheets, Board Documentation (pdf-version),, Evaluation Versions of Development Tools: e.g. Compiler, Debugger, DAvE Mother System v2.1 and Derivative Implementation Files (DIP), Memtool (Flash Programming Tool), Training Documentation, Demo Programs, Hands On Training (HOT) [more]
IAR KickStart Kit for AT91SAM7S contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications:AT91SAM7S development board from Atmel IAR visualSTATE evaluation edition, 20-state limitation IAR Embedded Workbench with a 32KB edition of IAR C/C++ Compiler (including example projects) and IAR J-Link debug probe [more]
KickStart Development Kit for NXP LPC2106 + J-Link probe
IAR KickStart Kit for LPC2106 contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: LPC2106 development board, IAR visualSTATE evaluation edition (20-state limitation), IAR Embedded Workbench with a 32KB edition of IAR C/C++ Compiler (including example projects), IAR J-LINK JTAG probe. [more]
KickStart Development Kit Plus for NXP LPC2129
IAR KickStart Kit for LPC2129 contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: LPC2129 development board, IAR visualSTATE evaluation edition (20-state limitation), IAR Embedded Workbench with a 32KB edition of IAR C/C++ Compiler (including example projects), IAR J-LINK JTAG debugger [more]
KickStart Development Kit Plus for NXP LPC2138
IAR Systems introduces a complete hardware and software development kit for ARM developers. The IAR KickStart Development Kit for NXP LPC2138 contains all necessary hardware and software and allows you to design, develop, implement and test your ARM applications on the LPC2138 chip from NXP.Whether you are a novice or seasoned developer, you will find the development kit a tremendous time-saver with its programming examples and flash programming tools available from the IAR Embedded Workbench. [more]
KickStart Development Kit for TI's TMS470
IAR KickStart Kit for Texas Instruments´ TMS470 contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: TMS470R1A256 development board from SoftBaugh IAR visualSTATE evaluation edition, 20-state limitation IAR Embedded Workbench with a 16KB edition of IAR C/C++ Compiler (including example projects) IAR J-LINK JTAG debugger [more]
KickStart Kit for LPC2103 + J-Link on-board
IAR KickStart Kit for LPC2103 contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: • LPC2103 development board,• J-Link on-board, IAR visualSTATE evaluation edition, 20-state limitation,• IAR Embedded Workbench with a 32KB edition of IAR C/C++ Compiler (including example projects). [more]
KickStart Kit for LPC2103 + J-Link JTAG probe
IAR KickStart Kit for LPC2103 contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: LPC2103 development board, IAR visualSTATE evaluation edition, 20-state limitation, IAR Embedded Workbench with a 32KB edition of IAR C/C++ Compiler (including example projects), IAR J-LINK JTAG debugger with USB connector. [more]
Kickstart Kit for LPC2148
IAR KickStart Kit for LPC2148 contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: LPC2148 development board, IAR visualSTATE evaluation edition, 20-state limitation, IAR Embedded Workbench with a 32KB edition of IAR C/C++ Compiler (including example projects).
KickStart Kit for STR912F plus j-link JTAG Debugger
The IAR KickStart board for STR912FA contains the necessary hardware and software and allows you to design, develop, integrate and test your applications: STR912FA development board Evaluation edition of IAR visualSTATE IAR Embedded Workbench with a 32KB kickstart version of the IAR C/C++ Compiler IAR J-LINK JTAG debugger [more]
KickStart Kit for STR912F
The IAR KickStart board for STR912FA contains the necessary hardware and software and allows you to design, develop, integrate and test your applications: STR912FA development board Evaluation edition of IAR visualSTATE IAR Embedded Workbench with a 32KB kickstart version of the IAR C/C++ Compiler [more]
KickStart Kit for LPC2468 plus j-link JTAG debugger
IAR KickStart Kit for LPC2468 contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: LPC2468 Development board, IAR visualSTATE evaluation edition, IAR PowerPac for ARM evaluation edition, IAR Embedded Workbench with a 32KB edition of IAR C/C++ Compiler (including example projects), IAR J-Link for ARM, Example applications for the LPC2468 board from IAR Systems, IAR PowerPac board support package, Board support software package for Micrium µC/OS-II evaluation edition [more]
KickStart Kit for LPC2468
IAR KickStart Kit for LPC2468 contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: LPC2468 Development board, IAR visualSTATE evaluation edition, IAR PowerPac for ARM evaluation edition, IAR Embedded Workbench with a 32KB edition of IAR C/C++ Compiler (including example projects). [more]
KickStart Kit for LPC2138
IAR KickStart Kit for LPC2138 contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: LPC2138 development board, IAR visualSTATE evaluation edition, 20-state limitation, IAR Embedded Workbench with a 32KB edition of IAR C/C++ Compiler (including example projects).
Kickstart Kit for LPC2148 plus j-link JTAG debugger
IAR KickStart Kit for LPC2148 contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: LPC2148 development board, IAR visualSTATE evaluation edition (20-state limitation), IAR Embedded Workbench with a 32KB edition of IAR C/C++ Compiler (including example projects), IAR J-LINK JTAG debugger [more]
Kickstart Kit for LPC2148 plus j-link JTAG debugger and trace connectors
IAR KickStart Kit for LPC2148 contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: LPC2148 development board, IAR visualSTATE evaluation edition (20-state limitation), IAR Embedded Workbench with a 32KB edition of IAR C/C++ Compiler (including example projects), IAR J-LINK JTAG debugger [more]
KickStart Kit for LPC2378
IAR KickStart Kit for LPC2378 contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: Olimex LPC2378 development board, IAR visualSTATE evaluation edition, 20-state limitation, IAR Embedded Workbench with a 32KB edition of IAR C/C++ Compiler (including example projects). [more]
KickStart Kit for LPC2378 + J-Link JTAG probe
IAR KickStart Kit for LPC2378 contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: Olimex LPC2378 development board, IAR visualSTATE evaluation edition, 20-state limitation, IAR Embedded Workbench with a 32KB edition of IAR C/C++ Compiler (including example projects). [more]
KickStart Kit for LPC2129
IAR KickStart Kit for LPC2129 contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: LPC2129 development board, IAR visualSTATE evaluation edition, 20-state limitation, IAR Embedded Workbench with a 32KB edition of IAR C/C++ Compiler (including example projects). [more]
KickStart Kit for LPC2106 plus j-link JTAG debugger
IAR KickStart Kit for LPC2106 contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: LPC2106 development board, IAR visualSTATE evaluation edition (20-state limitation), IAR Embedded Workbench with a 32KB edition of IAR C/C++ Compiler (including example projects), IAR J-LINK JTAG debugger [more]
KickStart Kit for LPC2106
IAR KickStart Kit for LPC2103 contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: LPC2103 development board, IAR visualSTATE evaluation edition, 20-state limitation, IAR Embedded Workbench with a 32KB edition of IAR C/C++ Compiler (including example projects). [more]
KickStart Kit for AT91SAM7S
The IAR KickStart board for AT91SAM7S contains the necessary hardware and software and allows you to design, develop, integrate and test your applications: AT91SAM7S development board from Atmel IAR visualSTATE evaluation edition, 20-state limitation IAR Embedded Workbench with a 32KB edition of IAR C/C++ Compiler (including example projects) [more]
KickStart Kit for AT91SAM7X + J-Link JTAG probe
IAR KickStart Kit for AT91SAM7X contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: AT91SAM7X development board from Atmel IAR visualSTATE evaluation edition, 20-state limitation IAR Embedded Workbench with a 32KB edition of IAR C/C++ Compiler (including example projects) IAR J-Link debug probe [more]
KickStart Kit for AT91SAM7X
IAR KickStart Kit for AT91SAM7X contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: AT91SAM7X development board from Atmel IAR visualSTATE evaluation edition, 20-state limitation IAR Embedded Workbench with a 32KB edition of IAR C/C++ Compiler (including example projects) [more]
KickStart Kit for AVR32UC3A plus j-link JTAG debugger
IAR KickStart Kit for Atmel AT32UC3A contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: AT32UC3A development board from Atmel IAR visualSTATE evaluation edition, 20-state limitation IAR Embedded Workbench for AVR32 with a 32KB edition of IAR C/C++ Compiler (including example projects) AVR JTAGICE mkII [more]
KickStart Kit for AVR32UC3A
IAR KickStart Kit for Atmel AT32UC3A contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: AT32UC3A development board from Atmel IAR visualSTATE evaluation edition, 20-state limitation IAR Embedded Workbench for AVR32 with a 32KB edition of IAR C/C++ Compiler (including example projects) AVR JTAGICE mkII [more]
KickkStart Kit for MCF52223 +J-Liink JTAG Probe
IAR KickStart Kit for MCF52223 (ColdFire) contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: MCF52223-SK development board IAR visualSTATE evaluation edition (including example projects) IAR Embedded Workbench for ColdFire with a 16KB/32KB edition of IAR C/C++ Compiler (including example projects) IAR J-LINK for ColdFire BDM 26 debugger [more]
KickStart Kit for MCF52223
IAR KickStart Kit for MCF52223 (ColdFire) contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: MCF52223-SK development board IAR visualSTATE evaluation edition (including example projects) IAR Embedded Workbench for ColdFire with a 16KB/32KB edition of IAR C/C++ Compiler (including example projects) [more]
KickStart Kit for LM3S102
The IAR KickStart Kit for Luminary LM3S102 contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: LM3S102 development board from Luminary with IAR J-Link on chip IAR visualSTATE evaluation edition, 20-state limitation IAR Embedded Workbench with an 8KB edition of IAR C/C++ Compiler (including example projects) [more]
KickStart Kit for LM3S811
The IAR KickStart Kit for Luminary LM3S811 contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: LM3S811 development board from Luminary with IAR J-Link on chip IAR visualSTATE evaluation edition, 20-state limitation IAR Embedded Workbench with an 8KB edition of IAR C/C++ Compiler (including example projects) Complete documentation: Quickstart guide, datasheets, schematics, application notes, and programming examples. [more]
KickStart Kit for STR750F plus j-link JTAG Debugger
The IAR KickStart board for STR750F contains the necessary hardware and software and allows you to design, develop, integrate and test your applications: STR750F development board Evaluation edition of IAR visualSTATE IAR Embedded Workbench with a 32KB kickstart version of the IAR C/C++ Compiler IAR J-LINK JTAG debugger [more]
KickStart Kit for STR750F
The IAR KickStart board for STR750F contains the necessary hardware and software and allows you to design, develop, integrate and test your applications: STR750F development board Evaluation edition of IAR visualSTATE IAR Embedded Workbench with a 32KB kickstart version of the IAR C/C++ Compiler [more]
KickStart Kit for STR731F plus j-link JTAG Debugger
The IAR KickStart board for STR731F contains the necessary hardware and software and allows you to design, develop, integrate and test your applications: STR731F development board Evaluation edition of IAR visualSTATE IAR Embedded Workbench with a 32KB kickstart version of the IAR C/C++ Compiler IAR J-LINK JTAG debugger [more]
KickStart Kit for STR731F
The IAR KickStart board for STR731F contains the necessary hardware and software and allows you to design, develop, integrate and test your applications: STR731F development board Evaluation edition of IAR visualSTATE IAR Embedded Workbench with a 32KB kickstart version of the IAR C/C++ Compiler [more]
KickStart Kit for STR730F plus j-link JTAG debugger
The IAR KickStart board for STR730F contains the necessary hardware and software and allows you to design, develop, integrate and test your applications: STR730F development board Evaluation edition of IAR visualSTATE IAR Embedded Workbench with a 32KB kickstart version of the IAR C/C++ Compiler IAR J-LINK JTAG debugger [more]
KickStart Kit for NXP LPC1114
IAR KickStart Kit for LPC1114 contains the necessary hardware and software andallows you to design, develop, integrate and test your NXP LPC11XX applications. [more]
KickStart Kit for STR730F
The IAR KickStart board for STR730F contains the necessary hardware and software and allows you to design, develop, integrate and test your applications: STR730F development board Evaluation edition of IAR visualSTATE IAR Embedded Workbench with a 32KB kickstart version of the IAR C/C++ Compiler [more]
KickStart Kit for STR712F plus j-link JTAG debugger
The IAR KickStart board for STR712F contains the necessary hardware and software and allows you to design, develop, integrate and test your applications: STR712F development board Evaluation edition of IAR visualSTATE IAR Embedded Workbench with a 32KB kickstart version of the IAR C/C++ Compiler IAR J-LINK JTAG debugger [more]
KickStart Kit for STR712F
The IAR KickStart board for STR712F contains the necessary hardware and software and allows you to design, develop, integrate and test your applications: STR712F development board Evaluation edition of IAR visualSTATE IAR Embedded Workbench with a 32KB kickstart version of the IAR C/C++ Compiler [more]
KickStart Kit for STR711F plus j-link JTAG debugger
The IAR KickStart board for STR711F contains the necessary hardware and software and allows you to design, develop, integrate and test your applications: STR711F development board Evaluation edition of IAR visualSTATE IAR Embedded Workbench with a 32KB kickstart version of the IAR C/C++ Compiler IAR J-LINK JTAG debugger [more]
KickStart Kit for STR711F
The IAR KickStart board for STR711F contains the necessary hardware and software and allows you to design, develop, integrate and test your applications: STR712F development board Evaluation edition of IAR visualSTATE IAR Embedded Workbench with a 32KB kickstart version of the IAR C/C++ Compiler [more]
KickStart Kit for STM32 + J-Link JTAG probe
The IAR KickStart Kit for STM32 contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: STM32 development board IAR visualSTATE evaluation edition, 20-state limitation (including example projects) IAR PowerPac for ARM evaluation edition (including board support) IAR Embedded Workbench with a 32KB edition of IAR C/C++ Compiler (including example projects) IAR J-LINK JTAG debugger Micrium board support [more]
KickStart Kit for STM32
The IAR KickStart board for STM32 contains the necessary hardware and software and allows you to design, develop, integrate and test your applications: STM32 development board IAR visualSTATE evaluation edition, 20-state limitation (including example projects) IAR PowerPac for ARM evaluation edition (including board support) IAR Embedded Workbench with a 32KB edition of IAR C/C++ Compiler (including example projects), IAR J-LINK Lite for ARM debug probe, Micrium board support [more]
KickStart Kit for SL ToolStick
IAR KickStart Kit for the Silicon Labs ToolStick contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: [more]
KickStart Kit for LPC2478
IAR KickStart Kit for LPC2478 contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: [more]
KickStart Kit for LPC1768
IAR KickStart Kit for LPC1768 contains all the necessary hardware and softwareand allows you to design, develop, integrate and test your applications. [more]
KickStart Kit for STM32F103ZE
IAR KickStart Kit for STM32F103ZE contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications [more]
KickStart Kit for STM32F107VC
IAR KickStart Kit for STM32F107VC contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications. [more]
Includings : - Easy Kit Version 3 - Getting Started, first 3 Steps to setup your Hardware, install the Tools and Debug the first Program, - Technical Documentation: e.g. User manuals (System unit and Peripheral unit), Architecture manual, Application notes, Errata sheets, Data Sheets, Board Documentation (pdf-version), - Evaluation Versions of Development Tools: e.g. Compiler, Debugger, DAvE Mother System v2.1 and Derivative Implementation Files (DIP), Memtool (Flash Programming Tool), - Training Documentation, Demo Programs, Hands On Training (HOT). [more]
Starter Kit XC888
This kit allows evaluation of the SAx-XC88x group microcontrollers. [more]
Starter Kit XC866
This kit allows evaluation of the SAx-XC866 group of microcontrollers. [more]
Intel® Atom™ processor N270Δ and Mobile Intel® 945GSE Express chipset development kit
The Intel® Atom™ processor N270Δ and Mobile Intel® 945GSE Express chipset development kit provides robust performanceper-watt, power-efficient graphics and rich I/O capabilities for cost-effective embedded solutions. [more]
Intel® Atom™ Processor Z5xx Series and Intel® System Controller Hub US15W Development Kit
The Intel® Atom™ processor Z5xx series and Intel® System Controller Hub US15Wdevelopment kit offers a versatile platform for numerous embedded applicationsincluding in-vehicle infotainment, medical, interactive client (kiosks,point-of-sale terminals), gaming, and industrial control. [more]
Atmel AT91RM9200 Evaluation Board
ITAT91RM9200 is a medium size (160x120 mm) board based on Atmel`s AT91RM9200 32-bit ARM920T RISC microcontroller. The board is well suited for a wide range of application development and prototyping purposes, and is capable of running different kinds of operating systems and debugging systems such as the iSYSTEM iC3000 debugger using JTAG and ETM debugging resources.
NXP LPC2138 Target Board is an evaluation and a development system for NXP ARM7TDMI-S based LPC2138 microcontroller. The ITLPC2138 package consists of a USB cable and a target board populated with: NXP LPC2138 CPU, minimum peripherals, JTAG debug connector, ETM trace connector and an on-board integrated iSYSTEM debugger. The user can write and debug the a [more]
ST STR9 Evaluation Board
ITSTR9 is a medium size (167x105 mm) board based on ST`s STR912FW44 32-bit microcontroller.The ITSTR9 board is based on universal base board with all peripheral (LCD, LED’s, push buttons, power supply, prototyping area,…) and piggyback module with target CPU. The board is well suited for a wide range of application development and prototyping purposes [more]
MCBSTR750 Evaluation Board +ULINK2 JTAG Adapter
The Keil MCBSTR750 Evaluation Board introduces you to the STMicroelectronics STR750 ARM family and allows you to create and test working programs for this advanced architecture. This board is a great starting point for your next ARM project. [more]
MCB2100 Evaluation Board
MCB2100 Evaluation Board introduces you to the NXP LPC2129 family of ARM processors and allows you to create and test working programs for this advanced architecture. Two CAN and two serial interfaces are available. [more]
MCB2130 Evaluation Board
MCB2130 Evaluation Board introduces you to the NXP LPC2130 ARM family and allows you to create and test working programs for this advanced architecture. Two serial interfaces, a speaker, analog input (via potentiometer), and eight LEDs are available. Debugging is supported via the JTAG interface and the Keil ULink USB-JTAG adapter. [more]
MCBSTR7 Evaluation Board
The Keil MCBSTR7 Evaluation Board introduces you to the STMicroelectronics STR710 family and allows you to create and test working programs for this ARM-based architecture. Serial and CAN interfaces, analog input (via potentiometer), and eight LEDs (on Port 3) are available. Debugging is supported via the JTAG interface and the Keil ULink USB-JTAG adapter. An evaluation copy of the Keil ARM Development Tools is included. [more]
MCB2140 Evaluation Board + ULINK-ME JTAG Adapter
The Keil MCB2140 Evaluation Board introduces you to the Philips LPC2140 ARM family and allows you to create and test working programs for this advanced architecture. [more]
MCBSTR9 Evaluation Board
The Keil MCBSTR9 Evaluation Board introduces you to the STMicroelectronics STR9 ARM family and allows you to create and test working programs for this advanced architecture. The Keil MCBSTR9 Evaluation Board connects to your PC using the JTAG interface (for program debug using the Keil ULINK USB-JTAG Adapter and the µVision IDE and Debugger). It provides Serial (RS-232), CAN, Ethernet, and USB interfaces as well as eight LEDs, analog input (via potentiometer), and several push buttons. [more]
MCB900 Evaluation Board
The Keil MCB900 Evaluation Board is a versatile, flexible prototype board for the NXP P89LPC93x microcontroller family. MCB900 connects to the a COM port of your PC via the serial COM interface. It includes the Keil µVision LPC Development Studio which allows you to create and debug programs that you can program into the on-chip Flash ROM using FlashMagic. [more]
MCBXC866 Evaluation Board
The Keil MCBXC866 Evaluation Board introduces you to the Infineon XC800 microcontroller family and allows you to create and test working programs for this 8051-based architecture. Serial and CAN interfaces, analog input (via potentiometer), and eight LEDs (on Port 3) make this board a great starting point for your next 8051 project. [more]
MCBSTM32 Evaluation Board + ULINK2 JTAG Adapter
The Keil MCBSTM32 Evaluation Board introduces you to the STMicroelectronics Cortex-M3 family of ARM devices and allows you to create and test working programs for this advanced architecture. One serial interface, analog input (via potentiometer), one CAN interface, LCD, USB, and eight LEDs make this board a great starting point for your next Cortex-M3 project. [more]
MCBSTR9 Evaluation Board + ULINK-ME JTAG Adapter
The Keil MCBSTR9 Evaluation Board introduces you to the STMicroelectronics STR9 ARM family and allows you to create and test working programs for this advanced architecture. The Keil MCBSTR9 Evaluation Board connects to your PC using the JTAG interface (for program debug using the included Keil ULINK USB-JTAG Adapter and the µVision IDE and Debugger). [more]
MCBSTR9 Evaluation Board + ULINK2 JTAG Adapter
The Keil MCBSTR9 Evaluation Board introduces you to the STMicroelectronics STR9 ARM family and allows you to create and test working programs for this advanced architecture. The Keil MCBSTR9 Evaluation Board connects to your PC using the JTAG interface (for program debug using the included Keil ULINK USB-JTAG Adapter and the µVision IDE and Debugger). It provides Serial (RS-232), CAN, Ethernet, and USB interfaces as well as eight LEDs, analog input (via potentiometer), and several push buttons. [more]
MCBSTM32 Evaluation Board+ ULINK-ME JTAG Adapter
The Keil MCBSTM32 Evaluation Board introduces you to the STMicroelectronics Cortex-M3 family of ARM devices and allows you to create and test working programs for this advanced architecture. One serial interface, analog input (via potentiometer), one CAN interface, LCD, USB, and eight LEDs make this board a great starting point for your next Cortex-M3 project. [more]
MCB2370 Evaluation Board
The Keil MCB2370 Evaluation Board introduces you to the Philips LPC23xx ARM family and allows you to create and test working programs for this advanced architecture. This board a great starting point for your next ARM project. [more]
MCB2460 Evaluation Board
The Keil MCB2460 Evaluation Board introduces you to the NXP (founded by Philips) LPC2400 ARM family and allows you to create and test working programs for this advanced architecture. [more]
MCBSTR750 Evaluation Board +ULINK-ME JTAG Adapter
The Keil MCBSTR750 Evaluation Board introduces you to the STMicroelectronics STR750 ARM family and allows you to create and test working programs for this advanced architecture. This board is a great starting point for your next ARM project. [more]
MCB2103 Evaluation Board
The Keil MCB2103 Evaluation Board introduces you to the Philips LPC2103 ARM family and allows you to create and test working programs for this advanced architecture. [more]
MCB2140 Evaluation Board
The Keil MCB2140 Evaluation Board introduces you to the Philips LPC2140 ARM family and allows you to create and test working programs for this advanced architecture. [more]
MCB950 Evaluation Board
The Keil MCB950 Evaluation Board is a versatile, flexible prototype board for the NXP P89LPC952 microcontroller family. It includes the Keil µVision LPC Development Studio which allows you to create and debug programs that you can program into the on-chip Flash ROM using FlashMagic. [more]
MCBSTR730 Evaluation Board
The Keil MCBSTR730 Evaluation Board introduces you to the STMicroelectronics STR730 ARM family and allows you to create and test working programs for this advanced architecture. [more]
MCBSTR750 Evaluation Board
The Keil MCBSTR750 Evaluation Board introduces you to the STMicroelectronics STR750 ARM family and allows you to create and test working programs for this advanced architecture. This board is a great starting point for your next ARM project. [more]
MCBSTM32 Evaluation Board
The Keil MCBSTM32 Evaluation Board introduces you to the STMicroelectronics Cortex-M3 family of ARM devices and allows you to create and test working programs for this advanced architecture. One serial interface, analog input (via potentiometer), one CAN interface, LCD, USB, and eight LEDs make this board a great starting point for your next Cortex-M3 project. [more]
MCBSTR7 Evaluation Board + ULINK-ME JTAG Adapter
The Keil MCBSTR7 Evaluation Board introduces you to the STMicroelectronics STR710 family and allows you to create and test working programs for this ARM-based architecture. Serial and CAN interfaces, analog input (via potentiometer), and eight LEDs (on Port 3) are available. Debugging is supported via the JTAG interface and the Keil ULink-ME USB-JTAG adapter. An evaluation copy of the Keil ARM Development Tools and ULINK-ME is included. [more]
MCB2388 Evaluation Board
The Keil MCB2388 Evaluation Board introduces you to the NXP (founded by Philips) LPC2388 ARM family and allows you to create and test working programs for this advanced architecture.Two serial interfaces, a speaker, analog input (via potentiometer), two CAN interfaces, LCD, USB, Ethernet, and eight LEDs make this board a great starting point for your next ARM project. [more]
MCB2387 Evaluation Board
The Keil MCB2387 Evaluation Board introduces you to the NXP (founded by Philips) LPC2387 ARM family and allows you to create and test working programs for this advanced architecture.Two serial interfaces, a speaker, analog input (via potentiometer), two CAN interfaces, LCD, USB, Ethernet, and eight LEDs make this board a great starting point for your next ARM project. [more]
MCB2387 Evaluation Board + ULINK-ME JTAG Adapter
The Keil MCB2387 Evaluation Board introduces you to the NXP (founded by Philips) LPC2387 ARM family and allows you to create and test working programs for this advanced architecture.Two serial interfaces, a speaker, analog input (via potentiometer), two CAN interfaces, LCD, USB, Ethernet, and eight LEDs make this board with the ULINK-ME the USB-JTAG adapter a great starting point for your next ARM project. [more]
MCB2460 Evaluation Board + ULINK2 JTAG Adapter
The Keil MCB2460 Evaluation Board introduces the NXP LPC2460 ARM family. It allows you to create and test working programs for this architecture.Two CAN & serial interfaces, analog input, QVGA LCD w/touch screen, USB, and Ethernet with the ULINK2 the USB-JTAG Adapter, make this board a great starting point for your ARM project. [more]
MCB2130 Evaluation Board + ULINK2 JTAG Adapter
MCB2130 Evaluation Board introduces you to the NXP LPC2130 ARM family and allows you to create and test working programs for this advanced architecture. Two serial interfaces, a speaker, analog input (via potentiometer), and eight LEDs are available. Debugging is supported via the JTAG interface and the Keil ULINK2 USB-JTAG adapter. [more]
MCB2130 Evaluation Board + ULINK-ME JTAG Adapter
MCB2130 Evaluation Board introduces you to the NXP LPC2130 ARM family and allows you to create and test working programs for this advanced architecture. Two serial interfaces, a speaker, analog input (via potentiometer), and eight LEDs are available. Debugging is supported via the JTAG interface and the Keil ULINK-ME USB-JTAG adapter. [more]
MCB2140 Evaluation Board + ULINK2 JTAG Adapter
The Keil MCB2140 Evaluation Board introduces you to the Philips LPC2140 ARM family and allows you to create and test working programs for this advanced architecture. [more]
MCB2360 Evaluation Board + ULINK2 Adapter
The Keil MCB2360 Evaluation Board introduces you to the Philips LPC23xx ARM family and allows you to create and test working programs for this advanced architecture. This board a great starting point for your next ARM project. [more]
MCB2360 Evaluation Board + ULINK-ME Adapter
The Keil MCB2360 Evaluation Board introduces you to the Philips LPC23xx ARM family and allows you to create and test working programs for this advanced architecture. This board a great starting point for your next ARM project. [more]
MCB2370 Evaluation Board + ULINK2 JTAG debugger
The Keil MCB2370 Evaluation Board introduces you to the Philips LPC23xx ARM family and allows you to create and test working programs for this advanced architecture. This board a great starting point for your next ARM project. [more]
MCB2370 Evaluation Board + ULINK-ME JTAG debugger
The Keil MCB2370 Evaluation Board introduces you to the Philips LPC23xx ARM family and allows you to create and test working programs for this advanced architecture. This board a great starting point for your next ARM project. [more]
The Keil MCB2103 Evaluation Board introduces you to the Philips LPC2103 ARM family and allows you to create and test working programs for this advanced architecture. [more]
MCB2103 Evaluation Board + ULINK-ME JTAG Adapter
The Keil MCB2103 Evaluation Board introduces you to the Philips LPC2103 ARM family and allows you to create and test working programs for this advanced architecture. [more]
MCB2388 Evaluation Board + ULINK-ME JTAG Adapter
The Keil MCB2388 Evaluation Board introduces you to the NXP (founded by Philips) LPC2388 ARM family and allows you to create and test working programs for this advanced architecture.Two serial interfaces, a speaker, analog input (via potentiometer), two CAN interfaces, LCD, USB, Ethernet, and eight LEDs make this board a great starting point for your next ARM project. [more]
MCB2388 Evaluation Board + ULINK JTAG Adapter
The Keil MCB2388 Evaluation Board introduces you to the NXP (founded by Philips) LPC2388 ARM family and allows you to create and test working programs for this advanced architecture.Two serial interfaces, a speaker, analog input (via potentiometer), two CAN interfaces, LCD, USB, Ethernet, and eight LEDs make this board a great starting point for your next ARM project. [more]
MCB2387 Evaluation Board + ULINK2 Adapter
The Keil MCB2387 Evaluation Board introduces you to the NXP (founded by Philips) LPC2387 ARM family and allows you to create and test working programs for this advanced architecture.Two serial interfaces, a speaker, analog input (via potentiometer), two CAN interfaces, LCD, USB, Ethernet, and eight LEDs make this board with the ULINK2 USB-JTAG adaptor a great starting point for your next ARM project. [more]
MCB2900 Evaluation Board
The Keil MCB2900 Evaluation Board introduces you to the NXP (founded by Philips) LPC2900 ARM family and allows you to create and test working programs for this advanced architecture. [more]
MCB2900 Evaluation Board + ULINK2 JTAG Adapter
The Keil MCB2900 Evaluation Board introduces you to the NXP (founded by Philips) LPC2900 ARM family and allows you to create and test working programs for this advanced architecture. [more]
MCB2900 Evaluation Kit + ULINK-ME JTAG Adapter
The Keil MCB2900 Evaluation Board introduces you to the NXP (founded by Philips) LPC2900 ARM family and allows you to create and test working programs for this advanced architecture. [more]
MCB1760 Evaluation Board
The Keil MCB1760 Evaluation Board, populated with the NXP LPC1768 microcontroller, introduces you to the NXP Cortex-M3 based LPC176x series and allows you to create and test working programs for this advanced architecture. [more]
MCB1760 Evaluation Board + ULINK2 JTAG Adapter
The Keil MCB1760 Evaluation Board, populated with the NXP LPC1768 microcontroller, introduces you to the NXP Cortex-M3 based LPC176x series and allows you to create and test working programs for this advanced architecture using the included Keil ULINK2 JTAG debugger for high-performance Debug/Download. [more]
MCB1760 Evaluation Board + ULINK-ME JTAG Adapter
The Keil MCB1760 Evaluation Board, populated with the NXP LPC1768 microcontroller, introduces you to the NXP Cortex-M3 based LPC176x series and allows you to create and test working programs for this advanced architecture using the included Keil ULINK-ME JTAG debugger/programmer for high-performance Debug/Download. [more]
MCBSTM32C Evaluation Board
The Keil MCBSTM32C Evaluation Board introduces the new STM32 Connectivity family of ARM Cortex-M3 processor-based devices, allowing you to create and test working programs for this advanced architecture. The MCBSTM32C has a wide range of interfaces making it a great starting point for your next Cortex-M3 project. [more]
MCBSTM32E Evaluation Board
The Keil MCBSTM32E Evaluation Board introduces you to the STMicroelectronics Cortex-M3 family of ARM devices and allows you to create and test working programs for this advanced architecture.Featuring a QVGA LCD display plus a wide range of interfaces such as USB, CAN, MicroSD Card and UART, the MCBSTM32E is a great starting point for your Cortex-M3 project. [more]
MCB1343 Evaluation Board
The Keil MCB1343 Evaluation Board introduces the new NXP LPC134x family of ARM Cortex-M3 processor-based devices, allowing you to create and test working programs for this advanced architecture. The MCB1343 has a wide range of interfaces making it a great starting point for your next Cortex-M3 project. [more]
MCB2470 Evaluation Board
The Keil MCB2460 Evaluation Board introduces you to the NXP (founded by Philips) LPC2470 ARM family and allows you to create and test working programs for this advanced architecture. [more]
MCBTMPM330 Evaluation Board
The Keil MCBTMPM330 Evaluation Board introduces you to the Toshiba TMPM330 family of ARM Cortex-M3 processor-based devices and allows you to create and test working programs for this advanced Cortex-M3 architecture. [more]
MCBXC167 Evaluation Board
The Keil MCBXC167 Evaluation Board introduce you to the Infineon XC16x microcontroller family and allow you to create and test working programs for this advanced architecture. [more]
MCB XC88x Evaluation Board
The Keil MCBXC88x Evaluation Board introduces you to the Infineon XC88x microcontroller family and allows you to create and test working programs for this 8051-based architecture. A CAN interface, analog input (via potentiometer), and eight LEDs (on Port 3) make this board a great starting point for your next 8051 project. [more]
MCBx51 Evaluation Board
The Keil MCBx51 Evaluation Board works with all 44-pin 8051 and 251 devices including the Intel 251Sx/Tx; Atmel T80C251G1D/G2D and 8051Rx2; Philips 8051Rx2 and 8xC664; Various Winbond devices; and Dallas 320, 420, and 520.Use this board to become familiar with the 8051 and 251 microcontroller families. [more]
NXP LH7A404 Card Engine
Logic´s complete line of development kits fast forward development and help engineers stay focused on their high-value core technologies.All development kits include an application baseboard, System on Module (SOM), and the accessories required to immediately begin development work. [more]
Zoom™ OMAP35x Torpedo Development Kit
By providing a product-ready software and hardware platform, Logic PD´s embedded product solutions fast forward development and helps your company stay focused on its high-value core technologies. The Zoom OMAP35x Torpedo Development Kit is a low-cost, high-performance application development kit for evaluating the functionality of the OMAP35x Torpedo System on Module (SOM). [more]
Texas Instruments Zoom™ OMAP36x MDP
The Zoom OMAP36x Mobile Development Platform (MDP) is a fully-featured evaluation platform built around the Texas Instruments (TI) OMAP3630 applications processor. [more]
Zoom™ TI AM3517 eXperimenter Kit
Logic PD´s product-ready software and hardware platforms fast forward your product development while reducing risk and controlling costs. The Zoom AM3517 eXperimenter Kit is a low-cost application development kit for evaluating the functionality of Texas Instruments´ AM3517 applications processor and Logic PD´s System on Module (SOM). [more]
Zoom™ SDK for NXP LH79524
By providing a product-ready hardware and software platform, Logic PD´s embedded solutions fast forward development and help you stay focused on your high-value core technologies. The Zoom Starter Development Kit (SDK) is a low-cost, high-performance application development kit for evaluating the functionality of the System on Module (SOM) Card Engine and associated processor. [more]
Zoom SDK for NXP LH7A404
By providing a product-ready hardware and software platform, Logic PD´s embedded solutions fast forward development and help you stay focused on your high-value core technologies. The Zoom Starter Development Kit (SDK) is a low-cost, high-performance application development kit for evaluating the functionality of the System on Module (SOM) Card Engine and associated processor. [more]
Zoom™ SDK for Marvell PXA270
By providing a product-ready hardware and software platform, Logic PD´s embedded solutions fast forward development and help you stay focused on your high-value core technologies. The Zoom Starter Development Kit (SDK) is a low-cost, high-performance application development kit for evaluating the functionality of the System on Module (SOM) Card Engine and associated processor. [more]
Zoom™ TI OMAP-L138 eXperimenter Kit
Logic PD´s product-ready software and hardware platforms fast forward your product development while reducing risk and controlling costs. The Zoom OMAP-L138 eXperimenter Kit is a low-cost application development kit for evaluating the functionality of Texas Instruments´ energy-efficient OMAP-L138 applications processor and Logic PD´s System on Module (SOM). [more]
Zoom™ TI OMAP-L138 eXperimenter Kit
Logic PD´s product-ready software and hardware platforms fast forward your product development while reducing risk and controlling costs. The Zoom OMAP-L138 eXperimenter Kit is a low-cost application development kit for evaluating the functionality of Texas Instruments´ energy-efficient OMAP-L138 applications processor and Logic PD´s System on Module (SOM). [more]
Texas Instruments Zoom™ OMAP35x Development Kit
By providing a product-ready software and hardware platform, Logic PD´s embedded product solutions fast forward development and helps your company stay focused on its high-value core technologies. The Zoom OMAP35x Development Kit is a low-cost, high-performance application development kit for evaluating the functionality of Texas Instruments´ OMAP 3 processors and System on Module (SOM). [more]
Professional-Grade Development Kit: i.MX515 ARM Cortex-A8 StackableUSB™ Computer (Linux-ready)
The DK1651-ET-Linux is a turn-key development kit with an extensive Linux tool base allowing for immediate out-of-the-box development for the SBC1651-ET i.MX515 ARM Cortex-A8 StackableUSB computer (includes board with all options installed, complete cable set, industrial enclosure, firmware, and docs). The SBC1651-ET is ideal for high-performance, low-power embedded applications. Freescale’s i.MX515 ARM Cortex-A8 CPU operates at 800MHz delivering the performance needed to run multimedia-rich applications in embedded environments.Offering several embedded I/O features, the SBC1651 also consumes minimal power, satisfying the demanding environmental conditions in which OEMs must operate. [more]
Professional-Grade Development Kit: PIC32 Industrial Host Controller for StackableUSB™
The DK1032 is a turn-key development kit with an extensive tool base allowing for immediate out-of-the-box development for the USB1032 PIC Industrial Host (includes board, complete cable set, firmware, and docs). The USB1032 is the ideal module for applications requiring more performance than typical micro-controllers have offered and is well-suited for applications confined to small, tight spaces, the 125 DMIPS performance requires only 100mA power, considerably less than an SBC. [more]
Professional-Grade Development Kit: i.MX515 ARM Cortex-A8 StackableUSB™ Computer (WinCE-ready)
The DK1651-ET-WinCE is a turn-key development kit with an extensive Window CE tool base allowing for immediate out-of-the-box development for the SBC1651-ET i.MX515 ARM Cortex-A8 StackableUSB computer (includes board with all options installed, complete cable set, industrial enclosure, firmware, and docs). The SBC1651-ET is ideal for high-performance, low-power embedded applications. Freescale’s i.MX515 ARM Cortex-A8 CPU operates at 800MHz delivering the performance needed to run multimedia-rich applications in embedded environments.Offering several embedded I/O features, the SBC1651 also consumes minimal power, satisfying the demanding environmental conditions in which OEMs must operate. [more]
StackableUSB™ Carrier Board for the Tower System
The CRR-TOWER provides design engineers additional expansion for the Freescale Tower System. With easy access to the rugged StackableUSB connector, users can effortlessly evaluate plug-and-play ¼-size (1.85” x 1.74”) StackableUSB I/O devices. From wireless to GPS to serial conversion, OEMs are able to cost-effectively explore a wealth of peripheral functions for their embedded system. [more]
StackableUSB™ Carrier Hub Board for the Tower System
The HUB-TOWER provides design engineers additional expansion for the Freescale Tower System. With easy access to the rugged StackableUSB connector, users can effortlessly evaluate plug-and-play ¼-size (1.85” x 1.74”) StackableUSB I/O devices. From wireless to GPS to serial conversion, OEMs are able to cost-effectively explore a wealth of peripheral functions for their embedded system. [more]
i.MX515 ARM Cortex-A8 StackableUSB™ Tower Computer Module (Linux-ready)
The TWR1650 is an i.MX515 evaluation module (with an extensive Linux tool base) boasting a subset of features common to an industrial-grade single board computer.Featuring an 800MHz ARM Cortex-A8 CPU, the TWR1650 delivers the performance needed to enable multimedia rich applications in rugged, harsh environments. Although rich in embedded I/O features, the TWR1650 consumes minimal power, simulating the demanding environmental conditions in which OEMs must operate.OEM versions of the SBC are available to ease transition from development to production. [more]
i.MX515 ARM Cortex-A8 StackableUSB™ Tower Module (WinCE-ready)
The DK1651-ET-Linux is a turn-key development kit with an extensive Linux tool base allowing for immediate out-of-the-box development for the SBC1651-ET i.MX515 ARM Cortex-A8 StackableUSB computer (includes board with all options installed, complete cable set, industrial enclosure, firmware, and docs). The SBC1651-ET is ideal for high-performance, low-power embedded applications.Freescale’s i.MX515 ARM Cortex-A8 CPU operates at 800MHz delivering the performance needed to run multimedia-rich applications in embedded environments.Offering several embedded I/O features, the SBC1651 also consumes minimal power, satisfying the demanding environmental conditions in which OEMs must operate. [more]
PICDEM CAN-LIN 3 Demonstration Board_duplicate
Microchip offers two similar PICDEM CAN-LIN demonstration boards tosupport different PICmicro® devices. All demonstrate the main featuresof the devices, especially those features of the integrated CAN module.In addition to the CAN network, the board also employs a LIN sub-network using Microchip´s PIC16C43X and PIC18F320 device families. [more]
PICDEM MC LV Development Board
The PICDEM MC LV Development Board provides a cost-effective method of evaluating and developing sensored or sensorless brushless DC (BLDC) motor control applications. The board supports Microchip’s 28-pin, PIC18F microcontrollers and dsPIC30F Digital Signal Controllers. The board is capable of controlling motors rated up to 48V and 2.2 Amps. [more]
PIC32 Starter Kit
The PIC32 Starter Kit provides the easiest and lowest cost method to experience the PIC32 microcontroller for the first time. From the over 35 source code examples to the getting started project, users quickly learn Microchip´s 32-bit family of microcontrollers and development tools. The kit includes everything needed to write, program, debug, and execute code on a high performance PIC32 microcontroller. [more]
PIC32 Plug-In Module
This PIC32 Plug-In Module enables PIC32 development on the Explorer 16 development board (DM24000x) and supports the MPLAB REAL ICE Trace Kit (AC244006). An 80 MHz [more]
Explorer 16 Development Board
The Explorer 16 is a low cost, efficient development board to evaluate the features and performance of Microchip´s new PIC24 Microcontroller, the dsPIC33 Digital Signal Controller (DSC) families, and the new 32-bit PIC32MX devices. [more]
PICDEM Full Speed USB
ThePICDEM™ FS-USB is a demonstration and evaluation board for thePIC18F4550 family of Flash microcontrollers with full speed USB 2.0interface. The board contains a PIC18F4550 microcontroller in a 44-pinTQFP package, representing the superset of the entire family of devicesoffering the following features:
The Low Pin Count USB Development Kit provides an easy, low-cost way to evaluate the functionality of Microchips PIC18F14K50 and PIC18F13K50 20-pin USB microcontrollers. The all-inclusive kit contains the hardware, software, and code examples necessary to bring your next USB design from concept to prototype. Created with the USB novice in mind, the kit includes Getting Started with Microchips Low Pin Count USB Solutions, a self-directed course and lab material designed to ease the learning curve associated with adding USB connectivity to embedded systems [more]
PICDEM Touch Sense 2
The PICDEM Touch Sense 2 board features the new peripheral on PIC24F parts called Charge Time Measurement Unit (CTMU). The board uses a PIC24F256GB110 device to implement a slider, 20-button matrixed keyboard and a wheel with center button and a soft power button. The board also works with the mTouch Diagnostic Tool, which is a Graphic User Interface tool use to develop, debug and diagnose the Capacitive Touch application. The GUI works on USB using the supplied USB cable. This product is also part of the Human Interface Program. [more]
F1 Evaluation Platform
The F1 Evaluation Platform is a demonstration/development tool for Enhanced Mid-range PIC microcontrollers (PIC12F1xxx/PIC16F1xxx). Populated with a PIC16LF1937 featuring XLP technology, this platform consists of a 44-pin development board with prototyping space, 3V LCD glass, support for the Motor Control add-on (coming soon), and support for PICkit 3 & PICkit Serial. This kit provides a platform for general purpose development, and includes demonstrations focusing on low Power, LCD, and motor control. [more]
MPLAB Starter Kit for PIC18F MCU
The MPLAB Starter Kit for PIC18F MCU contains everything needed to experience the high performance and versatility of the PIC18F microcontroller family. It includes an on-board debugger/programming capability as well as USB communication, a capacitive touch pad, potentiometer, acceleration sensor, MicroSD memory card, and an OLED display. The board can function as a USB mouse, joystick or mass-storage device (thumb drive) all using the on-board capacitive touch sense pads. [more]
mTouch Cap Touch Evaluation Kit
The mTouch Capacitive Evaluation Kit provides a simple platform for developing a variety of capacitive touch sense applications using PIC16F or PIC24F microcontrollers. The Diagnostic Tool provided allows the user to analyze application-critical information in real-time as it relates to touch sensor behavior. [more]
PICDEM Inductive Touch Development Kit
The PICDEM Inductive Touch Development Kit is an evaluation and development platform for Microchips Inductive Touch Technology. Factory programmed firmware provides immediate access to all the boards features through the use of the MPLAB mTouch plug-in. Using a PICkit Serial analyzer to communicate with the PC, it allows the user to analyze application critical information in real-time as it relates to sensor behavior [more]
PICDEM.net 2 Development Board
The PICDEM.net™ 2 Development Board (DM163024) is an Internet/Ethernet development board supporting both the popular ENC28J60 Ethernet Controller and the single-chip Ethernet microcontroller family, the PIC18F97J60. With this board, using Microchip’s free TCP/IP stack, a web server can be developed showcasing the capability to remote monitor and control embedded applications over the Internet. [more]
PICDEM Lab Development Kit
The PICDEM Lab Development Board is designed to providea comprehensive development and learning platform for virtually all ofMicrochips Flash-based 6-, 8-, 14-, 18-, and 20-pin, 8-bit PICMicrocontrollers.Geared toward first-time PIC Microcontroller usersand University students, the PICDEM Lab Development Board is suppliedwith five of our most popular 8-bit PIC Microcontrollers and a host ofdiscrete components used to create a number of commonly used circuits. Expansion headers provide complete access/connectivity to all pins onthe connected PIC Microcontrollers and all mounted components [more]
PIC18F4xK20 Starter Kit
The PIC18F4XK20 Starter Kit is a demonstration and development platformfor Microchips K20 series microcontrollers.The board provides aplatform to highlight this new familys benchmark for lower powerconsumption, low-cost and high-performance operation.It includes thedevelopment board, PICkit 2 Development Programmer/Debugger, andprogramming lessons. [more]
PICDEM Touch Sense 1 Development Kit
The PICDEM™ Touch Sense 1 Development Board and Diagnostic Tool provides a platform to introduce users to Microchips Capacitive mTouch™ Sensing Solutions.This board is a completely sealed application example using three different touch sensor configurations in the form of a Directional pad, Keypad, and Slider section.A factory programmed firmware application provides the user immediate access to all of the boards features through the use of the accompanying Windows(R) based Diagnostic Tool and PICkit Serial Analyzer.The Diagnostic Tool provides the user a platform to analyze application critical information in real-time as it relates to touch sensor behavior.This product is also part of the Human Interface Program. [more]
dsPICDEM 2 Development Board
The dsPICDEM™ 2 Development Board is a development and evaluation tool that helps create embedded applications using dsPIC30F Digital Signal Controllers. [more]
PICDEM 4 Demonstration Board
The PICDEM 4 is a demonstration and evaluation board for the 8-pin, 14-pin, and 18-pin general purpose family of products with power management features. [more]
PICDEM 2 Plus
The PICDEM 2 Plus is a simple board that demonstrates the capabilities of many of the 18-, 28- and 40-pin PIC16XXXX and PIC18XXXX devices. It can be used stand-alone with a programmed part, with an in-circuit emulator (e.g., MPLAB® ICE or MPLAB® REAL ICE™) or with an in-circuit debugger, MPLAB ICD 2. [more]
PICkit 1 Flash Starter Kit
The PICkit™ 1 Flash Starter Kit is a low-cost development kit with an easy-to-use interface for programming Microchip’s 8-/14-pin Flash family of microcontrollers. [more]
PIC18 Explorer Board
This low-cost demo board is for evaluation of our PIC18 MCU families. The PIC18 is our highest performance 8-bit architecture and has three different families: standard PIC18, PIC18 J-series and PIC18 K-series. This single development board supports dozens of the general purpose PIC18 families using various processor Plug-In Modules (PIMs). [more]
PICDEM LCD 2 Demonstration Board
The PICDEM LCD 2 Demonstration Board (DM163030) shows the main features of Microchip’s 28, 40, 64 and 80-pin LCD Flash PIC microcontrollers including the LCD voltage booster and contrast controller. It is populated with the PIC18F85J90. [more]
Mechatronics Demonstration Kit
The PICDEM™ Mechatronics demonstration board is an easy-to-use mechatronics development and demonstration platform. Mechatronics refers to implementing intelligent control in a mechanical system. Learn how to use PIC® microcontrollers to enhance or replace a mechanical design. [more]
Low Power Solutions Demonstration Board
The Low Power Solutions Demonstration board provides designers a convenient and fun way to explore PICmicro® nanoWatt features within a functional ultrasonic range-finder application. It features the PIC18F4620, Microchip Technology´s latest power managed device. [more]
PIC18 Development Kit
The PIC18 Development Kit is a complete bundle of the essential development tools needed to get started with your next PIC18 application. The kit includes a PIC18 Explorer Board, PICkit 3 Debugger/Programmer, USB cable, and a 9V universal power supply. The PIC18 Explorer Board includes both the PIC18F8722 and PIC18F87J11 microcontrollers and supports dozens of the general purpose PIC18 families using various processor Plug-in Modules (PIMs). [more]
PICDEM HPC Explorer Board
The PICDEM HPC Explorer Board replaces the PIC18F8720 64/80L TQFP Demo Board (DM183020). This low-cost demo board is ideal for users who want to evaluate the performance of Microchip high-end 8-bit microcontrollers of the PIC18F series. The board features a PIC18F8722 microcontroller, which is a super set of the entire 64-pin and 80-pin PIC18F general purpose family. An unpopulated Plug-In Module is included for use with the processor of your choice. Just snap off the attached board, populate the board, and plug it in [more]
PICkit Serial Analyzer
The PICkit Serial Analyzer is a low-cost USB-based tool used to direct communication between a PC and an external serial device. The kit comes complete with hardware (supporting I2C™, SMBus, SPI and USART protocols), an easy-to-use GUI (to configure and display communications) and a target demonstration board for out-of-the-box functionality. For more advanced users a DLL is also included as an API for developing custom softwar [more]
PICDEM System Management Kit
The PICDEM™ System Management Kit is a demonstration and training tool for system integration and the design of a variety of applications. PIC® microcontrollers provide powerful integrated peripherals, ideally suited for such integration tasks. System integration refers to the consolidation of multiple systems within a unified design. [more]
MPLAB ICD 3 Evaluation Kit
This kit includes a MPLAB ICD 3 Debugger, a PICDEM 2 Plus (DM163022), and a 9Vuniversal power supply. [more]
MPLAB ICD 3 Evaluation Kit With Explorer 16
The MPLAB ICD 3 with Explorer 16 Kit is a complete set of tools for applicationdevelopment using Microchip PIC24F, PIC24H, and dsPIC33 16-bit MCUs. [more]
PICDEM CAN-LIN 2 Demonstration Board
Microchip offers two similar PICDEM CAN-LIN demonstration boards to support different PICmicro® devices. All demonstrate the main features of the devices, especially those features of the integrated CAN module.In addition to the CAN network, the board also employs a LIN sub-network using Microchip´s PIC16C43X and PIC18F320 device families. [more]
LAB-X1 Experimenter Board (Assembled)
The LAB-X1 is microEngineering Labs, Inc.´s first pre-assembled experimenter´s platform. While PICProto boards allow you to create your own projects with a minimum of hassle, the LAB-X1 goes one step further. It provides an assembled testbed containing most of the circuitry commonly used with PICmicro microcontrollers (MCUs). [more]
MOD5282 Development Kit
This Network Development Kit contains all the hardware, software andtools you need to start writing application code for your product or ideaimmediately. All components are integrated and ready to run so you don´twaste any time configuring individual components. There is an extensivelist of example programs demonstrating how various network functions andfeatures operate. [more]
MOD5272 Development Kit
This Network Development Kit contains all the hardware, software and tools you need to start writing application code for your product or idea immediately. All components are integrated and ready to run so you don´t waste any time configuring individual components. There is an extensive list of example programs demonstrating how various network functions and features operate. [more]
SB72 Development Kit
The NetBurner SB72 comes preloaded with software to translate serial and Ethernet data, and is configurable through any web browser. The SB72application code can be customized to any specific application requirements with a network development kit. [more]
LPC3250-Stick
Plug in the stick and watch the stick application evaluate the performance of an ARM926EJS® core [more]
Development Kit for LPC3180
Includes phyCORE-LPC3180 SOM with 32 MB SDRAM and 32 MB Flash mounted on phyCORE-LPC3180 Carrier Board, PHYTEC Spectrum CD, AC adapter, serial cable, USB cable and access to schematics.Configuration: Basic System [more]
Evaluation Board for LPC 2140
The OM10071 Evaluation Board introduces you to the Philips LPC2140 ARM family and allows you to create and test working programs for this advanced architecture. [more]
Evaluation Board for LPC220X ARM MCU
Includes phyCORE-LPC2294 SOM with 1 MB SRAM and 2 MB Flash mounted on HD200 Carrier Board with RJ-45 Ethernet Adapter, IAR Jlink, BAre PCB Expansion Board, PHYTEC Spectrum CD, AC/DC adapter, serial cable, JTAG adapter cable and access to schematics.Configuration: Basic System [more]
LPC2919 Evaluation Board
This evaluation board hosts the LPC2919 microcontroller from NXP with an embedded ARM968E-S processor core and with an JTAG interface. In addition the driver chips for the external communication interfaces are included together with a wire-wrap area. [more]
LPC2919 Evaluation Board + Hitex debugSTICK
This evaluation board hosts the LPC2919 microcontroller from NXP with an embedded ARM968E-S processor core and with an JTAG interface. In addition the driver chips for the external communication interfaces are included together with a wire-wrap area. A compact JTAG debugger is included - Hitex debugSTICK. [more]
LPC2478-Stick
Discover the performance of the LPC2468 ARM7TDMI-S based microcontroller with the LPC-Stick! The LPC-Stick is a small modular evaluation kit with optional extension boards. [more]
LPC1768 mBed Development Board.
This board, which works with the groundbreaking mbed tool suite, lets you create a functioning prototype faster than ever. The tightly coupled combination of hardware and software makes it easy to explore designs quickly, so you can be more adventurous, more inventive, and more productive. [more]
LPC1300-Stick
Discover the performance of the LPC1313 or LPC1343 CortexM3TM core with the LPC1313-Stick or LPC1343-Stick. The LPC-Stick is a small modular evaluation kit with optional extension boards. The LPC-Stick package provides target hardware with the relative microcontroller from NXP, user pins and LEDs for applications use. Combined with the proven USB debugger device connection and the non-limited HiTOP development tools the LPC-Stick allows full access to all chip features, debugging and programming. [more]
LPC1343 LPCXpresso Board
The LPC1343 LPCXpresso board with NXP´s ARM Cortex-M3 microcontroller has been designed to make it as easy as possible to get started with Cortex-M3. The LPCXpresso comprises a target board combined with a JTAG debugger. A free Eclipse-based IDE from Code Red is also included. [more]
KickStart Development Kit for NXP LPC2106
IAR KickStart Kit for LPC2106 contains all the necessary hardware and software and allows you to design, develop, integrate and test your applications: LPC2106 development board, IAR visualSTATE evaluation edition (20-state limitation), IAR Embedded Workbench with a 32KB edition of IAR C/C++ Compiler (including example projects) [more]
Evaluation Board for LPC213x
OM10045 Evaluation Board introduces you to the NXP LPC2100 family of ARM processors and allows you to create and test working programs for this advanced architecture. Two CAN and two serial interfaces are available. [more]
LPC1114 LPCXpresso Board
The LPC1114 LPCXpresso board with NXP´s ARM Cortex-M0 microcontroller has been designed to make it as easy as possible to get started with Cortex-M0. The LPCXpresso comprises a target board combined with a JTAG debugger. A free Eclipse-based IDE from Code Red is also included. [more]
LPC1768 LPCXpresso Board
The LPC1768 LPCXpresso board with NXP´s ARM Cortex-M3 LPC17xx microcontrollers has been designed to make it as easy as possible to get started with Cortex-M3. The LPCXpresso comprises a target board combined with a JTAG debugger. A free Eclipse-based IDE from Code Red is also included. [more]
phyCORE®-AT91 System on Module
SOM module based on Atmel 32-bit ARM7 RISC microcontroller with Ethernet, 4 UARTs, 8-ch ADC, 2-ch DAC and JTAG offering up to 16 MB Flash and up to 8 MB SRAM.
Based on the NXP Semiconductors (founded by Philips) ARM7TDMI-S Processor Core, this subminiature System on Module offers 4 CAN interfaces, 10/100 MBits Ethernet, etc. running at 60 MHz CPU speed
Includes phyCORE-AT91M5500A SOM with 2 MB SRAM and 4 MB Flash mounted on HD200 Carrier Board with RJ-45 Ethernet Adapter, PHYTEC Spectrum CD, AC/DC adapter, serial cable, and access to schematics.
phyCORE®-XScale/PXA255 Basic Rapid Development Kit
The phyCORE System on Module (SOM) is designed to plug into a PHYTEC Carrier Board that provides I/O connectors such as DB-9, RJ-45, USB, and power jack, as well as any other interface circuitry not [more]
phyCORE®-ARM7/LPC2294 Rapid Development Kit - Basic
Includes phyCORE-LPC2294 SOM with 1 MB SRAM and 2 MB Flash mounted on HD200 Carrier Board with RJ-45 Ethernet Adapter, PHYTEC Spectrum CD, AC/DC adapter, serial cable, JTAG adapter cable and access to schematics.
Includes phyCORE-AT91M5500A SOM with 2 MB SRAM and 4 MB Flash mounted on HD200 Carrier Board with RJ-45 Ethernet Adapter, PHYTEC Spectrum CD, AC/DC adapter, serial cable, and access to schematics.
Includes phyCORE®-MCF5485 SBC with 64 MB DDR SDRAM and 32 MB Flash mounted on Carrier Board, Bare PCB Expansion Board, PHYTEC Spectrum CD, Freescale CodeWarrior eval. tools, P&E BDM adapter, AC/DC adapter, serial cable and access to schematics. [more]
phyCORE®- BF537 Rapid Development Kit
Includes phyCORE®-BF537 SBC with 128 MB SDRAM and 4 MB Flash mounted on Blackfin Carrier Board, Bare PCD Expansion Board, PHYTEC Spectrum CD, ADI CrossView CD with VisualDSP++ IDDE, AC adapter, cables and access to schematics.
Insert-ready SOM supporting Blackfin DSP/MCU with Ethernet, USB, CAN and optional WiLAN, FPGA. Configuration: 500 MHz, 128 MB SDRAM, 4 MB Flash, 32 KB EEPROM, USB, Ethernet, CAN, JTAG interface [more]
phyCORE®-ARM9/LPC3250 Rapid Development Kit
Includes phyCORE-LPC3250 SOM with 64 MB SDRAM and 64 MB Flash on phyCORE-LPC3250 Carrier Board, Bare PCB Expansion Board, PHYTEC Kit CD, cables, AC adapter, and access to schematics.
phyCORE®-i.MX31 Rapid Development Kit - Windows Embedded CE
Includes phyCORE®-i.mx31 SOM with 512 KB SRAM and 64 MB NAND Flash mounted on phyCORE-i.mx31 Carrier Board, phyMAPPER-i.mx31 Mapper board, 3.5" LCD, LCD adapter board, Bare PCB expansion board, serial cable, ethernet crossover cable, AC power adapter, module extraction tool, PHYTEC Spectrum CD and access to schematics.Configuration: WinCE [more]
phyCORE®-i.MX31 Rapid Development Kit - Linux
Includes phyCORE®-i.mx31 SOM with 512 KB SRAM and 64 MB NAND Flash mounted on phyCORE-i.mx31 Carrier Board, phyMAPPER-i.mx31 Mapper board, 3.5" LCD, LCD adapter board, Bare PCB expansion board, serial cable, ethernet crossover cable, AC power adapter, module extraction tool, PHYTEC Spectrum CD and access to schematics. Configuration: Linux [more]
phyCORE®-ARM9/LPC3180 Rapid Development Kit - Keil
Includes phyCORE®-LPC3180 SOM with 32 MB SDRAM and 32 MB Flash mounted on phyCORE-LPC3180 Carrier Board, Bare PCB Expansion Board, Keil Ulink2, Keil RealView MDK-ARM Evaluation Software, PHYTEC Spectrum CD, AC adapter, serial cable, USB cable and access to schematics. Configuration: Basic + KEIL [more]
phyCORE®-ARM9/LPC3180 Rapid Development Kit - IAR
Includes phyCORE®-LPC3180 SOM with 32 MB SDRAM and 32 MB Flash mounted on phyCORE-LPC3180 Carrier Board, PHYTEC Spectrum CD, AC adapter, serial cable, USB cable and access to schematics. Configuration: Basic + IAR [more]
phyCORE®-ARM9/LPC3180 Rapid Development Kit - LINUX
Includes phyCORE®-LPC3180 SOM with 32 MB SDRAM and 32 MB Flash mounted on phyCORE-LPC3180 Carrier Board, PHYTEC Spectrum CD, AC adapter, serial cable, USB cable and access to schematics. Configuration: Basic + LINUX [more]
phyCORE®-MCF5485 System on Module
Integrated 32-bit SoM features Freescale ColdFire operating at 200 MHz with dual Ethernet, dual CAN, 4 UARTs, 2.0 USB, PCI, SPI, I2C and up to 128 MB DDR-SDRAM & 64 MB Flash.
phyCORE®-XScale/PXA270 Rapid Development Kit w/ LCD
Includes phyCORE®-PXA270 SOM with 64 MB SDRAM and 32 MB Flash mounted on Carrier Board with Expansion Board, 8.4" Sharp LCD/Touch Panel, Bare PCB Expansion Board, JTAG Adapter, null modem cable, parallel cable, cross-over ethernet cable, power adapter, access to schematics, pre-installed Linux OS or Windows Embedded CE 6.0 demo image and PHYTEC Spectrum CD including SBC hardware manual, evaluation compiler, software demos and Controller User´s Manual
This 32-bit MCU high-performance, low power LCP3180 ARM926EJ-S device from NXP Semiconductors (founded by Philips) provides a vector floating-point co-processor and integrated USB OTG, as well as the ability to operate in ultra-low-power mode down to 0.9V. Configuration:208 MHz, 32 MB SDRAM,32 MB Nand Flash, 32 KB EEPROM, USB OTG, JTAG interface [more]
phyCORE®-MCF5485 System on Module
Integrated 32-bit SoM features Freescale ColdFire operating at 200 MHz with dual Ethernet, dual CAN, 4 UARTs, 2.0 USB, PCI, SPI, I2C and up to 128 MB DDR-SDRAM & 64 MB Flash. Configuration: MCF5485, 200 MHz, 64 MB DDR SRAM, 32 MB Flash, Ethernet, 2.0 USB [more]
phyCORE®-MPC5554 System on Module
The Freescale MPC5554 PowerPC microcontroller embodies the continued development of the successful MPC500 family. Configuration: MPC5554 (132 MHz), 2 MB SRAM, 2 MB Flash, CAN, Ethernet, FPGA [more]
phyCORE®- MPC5200B tiny System on Module
The phyCORE-MPC5200B tiny is a System on Module populated with the high-performance, 32-bit RISC MPC5200B processor from Freescale. Configuration: 16 MB Flash, 128 MB DDR-SDAM, CAN, Ethernet, USB 1.1 host, MMU [more]
phyCORE®-MPC5200B I/O System on Module
The phyCORE-MPC5200B I/O is a System on Module populated with the high-performance, 32-bit RISC MPC5200B processor from Freescale. Configuration: 32 MB Flash, 128 MB SDRAM, 2 MB SRAM, CAN, Ethernet, FPGA, MMU. [more]
phyCORE®-MPC555 System on Module
32-bit PowerPC module in sub-mini dimensions with dual 2.0B CAN, FPU, SPI, dual UART, QADC running at 40 MHz for advanced automotive, avionics and industrial control applications. Configuration: 1 MB RAM, 512 KB Flash, 4 KB EEPROM, ETR [more]
phyCORE®-MPC565 System on Module
Based on the Freescale MPC565 microcontroller, this module features Ethernet crossed with Triple On-chip CAN & 64-bit FPU on a credit card size SOM with Burst Flash and SRAM especially suited for calculation-intensive embedded applications. Configuration: 56 MHz, 2 MB Burst-SRAM, 2 MB asynch. external Flash, 1 MB on-chip Flash, 4 KB I2C-EEPROM, CS8900A Ethernet, 3x CAN, 1x J1850, 1x BDM/Nexus, ind temp range, PLD V2 [more]
phyCORE®-ARM11/i.MX31 System on Module
The phyCORE-i.MX31 is an ARM®-11 based System on Module populated with the Freescale® i.MX31: a high performance multimedia applications processor. Graphics acceleration, state-of-the-art power management, Floating Point Unit, and rich peripherals such as Ethernet, USB and integrated LCD controller make this module the ideal candidate for computer-bound applications. Configuration: 128 MB DDR RAM, 32 MB NOR Flash, 64 MB NAND Flash, 512 kB SRAM, 32 kBit EEPROM, Ethernet, RTC, USB [more]
phyCORE®-ARM7/LPC2294 Rapid Development Kit + Keil
Includes phyCORE-LPC2294 SOM with 1 MB SRAM and 2 MB Flash mounted on HD200 Carrier Board with RJ-45 Ethernet Adapter, Keil ULink2, PHYTEC Spectrum CD, Keil DK-ARM Evaluation Software, AC/DC adapter, serial cable, JTAG adapter cable and access to schematics.Configuration: Keil [more]
phyCORE®-MPC5554 P&E Micro Rapid Development Kit
Includes phyCORE®-MPC5554 module and Carrier Board, Bare PCB Expansion Board, P&E Micro systems MPC55xx USB-JTAG Debugging Interface, P&E Micro PKGPPC Nexus Starter Edition software, PHYTEC Tool CD for Freescale MPC5554, AC/DC adapter, serial cable and access to schematics.
phyCORE®-ARM9/LPC3250 Rapid Development Kit - Keil
The phyCORE-ARM9/LPC3250 System on Module (SOM) is designed to plug into a PHYTEC phyCORE-ARM9/LPC3250 Carrier Board that provides I/O connectors such as DB-9, RJ-45, USB, and power jack, as well as any other interface circuitry not provided on the phyCORE-ARM9/LPC3250 module itself. [more]
phyCORE®-ARM9/LPC3250 Rapid Development Kit - IAR
The phyCORE-ARM9/LPC3250 System on Module (SOM) is designed to plug into a PHYTEC phyCORE-ARM9/LPC3250 Carrier Board that provides I/O connectors such as DB-9, RJ-45, USB, and power jack, as well as any other interface circuitry not provided on the phyCORE-ARM9/LPC3250 module itself. [more]
phyCORE®-ARM9/LPC3250 Rapid Development Kit - WinCE
The phyCORE-ARM9/LPC3250 System on Module (SOM) is designed to plug into a PHYTEC phyCORE-ARM9/LPC3250 Carrier Board that provides I/O connectors such as DB-9, RJ-45, USB, and power jack, as well as any other interface circuitry not provided on the phyCORE-ARM9/LPC3250 module itself. [more]
phyCORE®-ARM9/LPC3250
The phyCORE-LPC3250 is an ARM-9 based, small form factor, OEMable module populated with the NXP LPC3250. State-of-the-art power management, Vector Floating Point Unit (VFP), and rich peripherals such as USB OTG, Ethernet, and integrated LCD controller make this module the ideal candidate for embedded applications requiring high performance and low power consumption. [more]
phyCORE®-ARM11/i.MX31
The phyCORE-i.MX31 is an insert-ready System on Module (SOM) subassembly in miniature dimensions, populated with the Freescale i.MX31. [more]
phyCORE®-i.MX27
The phyCORE-i.MX27 is a subminiature (84 x 60 mm) insert-ready System on Module populated with the Freescale i.MX27 microcontroller. [more]
miniMODUL-167
The miniMODUL-167 is intended for use in memory-intensive applications and in driving a CAN-bus interface. The size of a credit card (85 by 55 mm.), the standard board is populated with the Infineon C167CR controller and runs at a 20 MHz clock speed, delivering instruction cycles in 100 ns. [more]
DIPmodul-164
This tiny yet highly cost-effective insert-ready System on Module is based on the Infineon C164CI 16-bit microcontroller in MQFP-80 packaging. [more]
phyCORE®-XC167
The phyCORE-XC167 belongs to PHYTEC´s phyCORE System on Module family and supports the XC167CI controller from Infineon in TQFP-144-50 housing [more]
phyCORE®-XC161
The phyCORE-XC161 belongs to PHYTEC´s phyCORE System on Module family and supports the XC161CJ controller from Infineon in TQFP-144-50 housing. [more]
phyCORE®-167
The phyCORE-167/ST10F168 supports high-end 16-bit controllers from Infineon featuring on-chip CAN and Flash. [more]
phyCORE-i.MX27 Rapid Development Kit (WinCE)
Includes phyCORE-i.MX27 SOM with 512 KB SRAM and 64 MB NAND Flash mounted on phyCORE-i.MX27 Carrier Board, phyMAPPER-i.MX27 Mapper board, 3.5" LCD, LCD adapter board, serial cable, ethernet crossover cable, AC power adapter, PHYTEC tool CD and access to schematics
Includes phyCORE-i.MX27 SOM with 512 KB SRAM and 64 MB NAND Flash mounted on phyCORE-i.MX27 Carrier Board, phyMAPPER-i.MX27 Mapper board, 3.5" LCD, LCD adapter board, serial cable, ethernet crossover cable, AC power adapter, PHYTEC tool CD and access to schematics
