The AMCC Arches reference design kit provides users with a solution which allows for quicker time to market and thus a quicker time to revenue. The Arches AMC card, incorporating the industry-standard Linux operating system and U-Boot firmware, is a comprehensive reference design kit specifically for AdvancedTCA and MicroTCA systems. [more]
Makalu: 405EX Wireless-N Enterprise Access Point Reference Design
AMCC’s PowerPC 405EX reference design kit provides customers with an enterprise wireless-N Access Point solution. The production ready software and the “Makalu” network appliance hardware reference design platform enable quick, low-risk development of Access point products, offering significant cost and performance advantages when compared to competing solutions. [more]
Robotics Development Kit
The Robotics Development Kit offers an introduction into the world of robots for both beginners and advanced robot enthusiasts. The development kit includes the powerful PCW Integrated Development Environment with compiler support for Microchip´s PIC® PIC10, PIC12 and PIC16 families and an ICD-U64 in-circuit programmer/debugger that supports C aware real time debugging. The prototyping board has a variety of devices for every robot to be able to interact with its environment. The devices allow the robot to see, sense magnetic fields, speak, accept external commands, and move; making it fit for robot sumo competition. [more]
eReader Reference Design based on i.MX51
Freescale has developed an eReader reference development system as thenext installment in the Freescale Smart Application Blueprint for RapidEngineering (SABRE) series of platforms. By enabling a Soft EPDController to drive the E Ink panel, there is no need for costlyexternal controllers and associated memories. [more]
MPC8349EMITXE : MPC8349E-mITXE Reference Platform
The MPC8349E-mITXE reference platform demonstrates the capabilities of Freescale´s PowerPC MPC8349E processor. This platform is the ideal platform for hardware and software development. In addition to the highly integrated MPC8349E processor, the reference platform leverages external components to support these additional features [more]
MPC8349e-MITX-GP Industrial Reference Platform
The MPC8349e-MITX-GP Industrial Evaluation platform not only demonstrates the capabilities of Freescale´s MPC8349E processor but is an ideal solution for evaluating Freescale´s Power™ Architecture Processors and software development around Power™ Architecture. This evaluation platform is specifically for customers who are NOT familiar with Power Architecture, to gain hands on experience. [more]
Next-generation residential gateway products will be challenged to maintain bridging/routing throughput speeds as WAN interfaces (GPON, VDSL2) distribute more packets per second. The products that survive will deliver this level of performance and the flexibility to support multiple LAN interfaces (802.11n, HPNA 3.1, MoCa, HomePlug AV UPA). In addition to performance, these products must also bring the right balance of consumer required features and ease of use, while supplying the service providers with a cost-effective platform that enables future services via remotely managed upgrades. [more]
MPC8360E-RDK: Industrial Development Platform
The Internet has changed the way we live, communicate and run our businesses. This enhanced connectivity is revolutionizing how embedded industrial machines autonomously exchange information via simple, low-cost, commercial off-the-shelf (COTS) equipment running standard protocols to operate with increased capacity, better management and greater efficiency. [more]
Smartbook Reference Design
Freescale has developed a smartbook tablet reference design, the firstin the Freescale Smart Application Blueprint for Rapid Engineering(SABRE) series of platforms. The SABRE platform for smartbooks provides apersonal, portable Internet and entertainment experience whilecombining some of the best attributes of smartphones and netbooks. [more]
The MPC8377EWLAN access point/router is a complete production-ready, Bill of Materials (BOM)-optimized reference design solution capable of supporting wireless data rates up to 600 Mbps is ideally suited to maximize performance while still meeting the required power and cost budgets required by this application.
The P2020RDB is a highly-integrated reference design board that can help shorten your time to market. The reference design is aimed at networking, wired and wireless access, industrial and medical applications. This cost-effective board is based on the QorIQ™ P2020E processor family, along with leading-edge external components to help you quickly design and implement your target application. [more]
IRD-LPC1768-DEV
The NXP LPC1768 Cortex-M3 microcontroller based industrial reference design(IRD) is optimized to save development time in typical industrial controlapplications. [more]
IRD-LPC2468-DEV
The NXP LPC2468 ARM7 microcontroller basedindustrial reference design (IRD) is optimized to save development time intypical industrial control applications. [more]
RTC Demo PCF2123
The NXP RTC Demo PCF2123 is a reference design for a low power Real Time Clockand LCD solution with an available I2C temperature sensor. [more]
LPC1768 Cortex-M3 Microcontroller-based IRD
The industrial control platform includes an Cortex-M3 LPC1768microcontroller core board running at 100MHz. The LPC1768 has 512kB ofon-chip high speed Flash memory, 64kB of on-chip RAM, a 10/100 EthernetMedia Access Controller (MAC) port, a USB full speed device/host/OTGport, two CAN channels, and a collection of serial communicationsinterfaces. [more]
FOC Drive Application Kit
The kit is built around the two novel Infineon MCU’s, namely the XC878 and the XE164F MCU both capable of running Field Oriented Control (FOC). [more]
Dual Motor Drive Application Kit
The kit is built around the two novel Infineon MCU’s, namely the XC878 and the XE164F MCU both capable of running Field Oriented Control (FOC) and Power Factor Correction (PFC). [more]
DAvE Drive Application Code Generator for PMSM and BLDC Motor Control
DAvE Drive is a GUI based software tool that allows application developers to configure XC886/XC888 software for control of brushless synchronous 3-phase motors in a very efficient way. [more]
BLDC (Brushless DC) Application Kit
The kit is built around the 8-bit XC866 MCU and comes complete with tutorials, reference software, development tools and design files that show how the XC866 may be used to control a BLDC motor. [more]
3-Phase Motor Drive Application Kit
Infineon offers now a new 3-phase motor drive application kit to shorten time-to-market for energy efficient motor control designs targeting excellent speed control, reduced noise and high system reliability. [more]
XC866 LIN Stepper Motor Kit
To jump start stepper motor design and provide an introduction to the Local Interconnect Network (LIN) protocol Infineon is pleased to offer the XC866 LIN Stepper Motor Application Kit. [more]
Application kit for Field Oriented Control using XC886/888
The FOC Drive Application Kit provides customers with a cost-effective method of evaluating and developing Permanent Magnet Synchronous Motor (PMSM) control applications using the FOC technique. [more]
EXT BOARD MOTOR CONTROL LPC2900
This reference design is ideally suited for the initial steps in thedevelopment of sophisticated motor control applications. Designed torealize brushless DC motor control based on the LPC29xx family thistransparent platform provides rapid access to the peripherals. Based onthis reference platform the developer can easily define his own specificsolution. [more]
DTMF Decoder Reference Design
Using the 25 MIPS CPU and on-chip ADC, the C8051F300 can perform DTMF tone generation and decoding. The combination of high performance and small size (3x3 mm) makes the C8051F300 an ideal choice for applications requiring DTMF decoding or other CPU intensive tasks. [more]
Embedded Ethernet Development Kit
The Embedded Ethernet Development Kit provides all of the hardware and software necessary to develop real-world embedded Ethernet applications using Silicon Laboratories´ CP220x Ethernet Controller and high-performance microcontrollers, and the industry-proven CMX-MicroNet protocol stack. [more]
USB FM Radio Reference Design
The USB FM Radio Reference Design is a unique example of Silicon Laboratories´ mixed-signal leadership. This reference design combines a high-performance USB enabled microcontroller (C8051F321) and the revolutionary single-chip FM Radio Tuner (Si4701). [more]
Embedded Modem Development Kit
The Embedded Modem Development Kit provides all of the hardware and software to create an embedded modem solution. [more]
PoE with Voice Transmission Reference Design
The reference design kit includes a PoE-VOICE-EB reference design board which contains an IEEE 802.3af compliant Power over Ethernet (PoE) circuit, 8 kHz voice/speech sampling system and an IEEE 802.3 embedded Ethernet connection. [more]
Sensorless BLDC Motor Reference Design
The Sensorless BLDC Motor Reference Design illustrates how to use the 5x5 mm C8051F310 microcontroller for high performance sensorless BLDC motor applications. [more]
Stepper Motor Reference Design
The Stepper Motor Reference Design illustrates how to use the 3x3 mm C8051F301 microcontroller for high performance stepper motor applications. This reference design can also be used as a platform for stepper motor code development. The firmware (AN155SW) demonstrates a linear-velocity profiler with adjustable acceleration. [more]
Temperature Compensated RTC Reference Design
The Temperature Compensated Real-Time Clock (RTC) Reference Design kit provides a cost-effective way to easily develop applications that use a temperature compensated RTC. [more]
USB Mass Storage Reference Design
The USB Mass Storage and CF/MMC/SD Reference Design kit includes everything necessary to implement a FAT16 file system using an SD, MMC or CF memory card on your Silicon Labs MCU. In addition, it provides a method of interfacing that system to a host PC via USB using the Mass Storage Device class. [more]
Voice Recorder Reference Design
The Voice Recorder Reference Design illustrates how to use a C8051F411 for voice application. It is a practical demonstration of C8051F41x high performance analog and CPU throughput capability. [more]
Stepper Motor and DC motor drive using L6206 DIP
The EVAL6206N will help you in evaluating the L6206 in PowerDIP package. It implements a typical application, enabled to run one to four DC motors or one stepper motor. On the board the L6506, PWM current [more]
STM32 Motor control starter kit
The STM32 microcontrollers with dedicated motor control peripherals and powerful Cortex™-M3 core offer the computing power developers need for 3-phase brushless motor vector control. [more]
The Luminary Micro Stellaris® Serial-to-Ethernet Reference Design Kit (RDK-S2E) offers a complete, open-tool, and ready-to-implement solution designed to add web connectivity to any serial device. Included in the RDK-S2E is the tiny-footprint Luminary Micro Stellaris® Serial-to-Ethernet Module (MDL-S2E). [more]
Stellaris® Stepper Motor Reference Design Kit
The Luminary Micro Stellaris Stepper Motor Control Reference Design Kit (Stepper RDK) contains all the necessary hardware and software for you to design, develop, and integrate your stepper motor applications. [more]
Stellaris AC Induction Motor Reference Design Kit
The Luminary Micro Stellaris AC Induction Motor Reference Design Kit (ACIM RDK) contains all the necessary hardware and software to design, develop, and integrate AC induction motor applications. The [more]
Stellaris® Brushless DC (BLDC) Motor Reference Design Kit
The Luminary Micro Stellaris Brushless DC (BLDC) Motor Control Reference Design Kit (RDK-BLDC) with Ethernet and CAN contains all the necessary hardware and software for you to design, develop, and integrate your BLDC motor applications. [more]
Stellaris® Intelligent Display Module (IDM) with Ethernet
The compact Luminary Micro Stellaris® Intelligent Display Module (MDL-IDM) offers a complete graphical touch-screen user interface solution for control, automation, and instrumentation applications. Featuring Power-over-Ethernet (PoE), the Stellaris® IDM offers a simple method to produce intelligent terminals that can be simultaneously powered and network-connected by a single CAT5 Ethernet cable. [more]
eZ430-Chronos Wireless Watch Development Tool
The eZ430-Chronos is a highly integrated, wearable wireless development system based for the CC430 in a sports watch. [more]
Stellaris® Single Board Computer Intelligent Display Module RDK
The Luminary Micro Stellaris® 3.5-inch Landscape Single Board ComputerIntelligent Display Reference Design Kit (RDK-IDM-SBC) offers a complete,open-tool graphical touch-screen user interface design solution for control,automation, and instrumentation applications. [more]
The Luminary Micro Stellaris® 3.5-inch Landscape Intelligent Display ReferenceDesign Kit (RDK-IDM-L35) offers a complete, open-tool graphical touch-screenuser interface design solution for control, automation, and instrumentationapplications. [more]
Stellaris® Brushed DC (BDC) Motor Reference Design Kit
Luminary Micro’s Stellaris Brushed DC Motor Control Module with CAN (RDK-BDC)offers a variable speed control for 12 V brushed DC motors at up to 40 Acontinuous current. [more]
Stellaris® Brushed DC 24 V Motor Control Module with CAN
The MDL-BDC24 "Black Jaguar" offers a direct replacement for Texas Instruments´ MDL-BDC, the official CAN-enabled speed controller of the FIRST Robotics Competition (FRC) Kit of Parts [more]
Stellaris® Brushed DC (BDC) 12V Motor Module
Luminary Micro’s Stellaris Brushed DC Motor Control Module with CAN (MDL-BDC) offers a variable speed control for 12 V brushed DC motors at up to 40 A continuous current. [more]
eZ430-Chronos Wireless Watch Development Tool (EU)
The eZ430-Chronos is a highly integrated, wearable wireless development system based for the CC430 in a sports watch. [more]
eZ430-Chronos Wireless Watch Development Tool (Americas)
The eZ430-Chronos is a highly integrated, wearable wireless development system based for the CC430 in a sports watch. [more]
