The LX-1000 is a modular emulator design supporting both ARM and Intel devices. Three modules are available depending on the needs of the user. [more]
LC-500 JTAG Emulator
The LC-500 is Arium´s most popular JTAG emulator for targets with ARM cores and supports ARM7, ARM9, ARM9E, ARM11, XScale, OMAP, Cortex-M1, Cortex-M3, Cortex-R4 and Cortex-A8 [more]
HS-1000S JTAG Emulator with ETM Trace
The HS-1000S is one of Arium’s most advanced emulators for targets with ARM® processor cores and supports ARM7, ARM9, ARM9E, ARM11, XScale, OMAP, Cortex-M1, Cortex-M3, Cortex-R4 and Cortex-A8 [more]
ECM-XDP3 JTAG Emulator
The ECM-XDP3 In-Target Probe hardware-assisted debug solution comes in the form of the company´s ECM-XDP3 JTAG emulator and latest SourcePoint debug interface. The Intel Atom processor is based on Intel´s new 45nm Hi-k low power microarchitecture. [more]
AT89OCD-01 Emulator
This system is designed to allow an easy connection to Atmel AT8xC51 microcontrollers and uses the USB interface connection to PC platforms (standard USB B plug to A plug cable). [more]
Blackhawk LAN560 JTAG Emulator
The LAN560 JTAG Emulator from Blackhawk, is the first fully integrated Ethernet and USB XDS560-class product for debugging TI DSPs over TCP/IP networks. The Blackhawk LAN560 is built upon the widely-used USB560M (TMDSEMU560U) JTAG emulator first introduced by Blackhawk and sold world-wide. The Blackhawk LAN560 supports all versions of Code Composer Studio from v2.2 to 5.x. [more]
Blackhawk PCI 560 JTAG Emulator
The Blackhawk PCI560 is a third generation XDS560-class emulator and the only half-height and half-length XDS560 JTAG Emulator that supports all of the advanced capabilities of Texas Instruments latest DSPs [more]
Blackhawk USB510 JTAG Emulator
The Blackhawk™ USB510 JTAG Emulator is a top-of-the-line high-performance JTAG Emulator for Texas Instruments TMS320, TMS470 (ARM) and OMAP families. The credit card sized USB510 JTAG Emulator is compact and lightweight and features a high-tech medical-grade JTAG cable built for tough environments. [more]
Blackhawk USB560BP JTAG Emulator
The compact bus-powered Blackhawk USB560BP is the third generation of the widely used XDS560-class emulator first introduced by Blackhawk and the most popular bus-powered USB JTAG Emulator supporting all of the advanced capabilities of Texas Instruments latest DSPs. [more]
Blackhawk USB2000 Controller
The Blackhawk USB2000 Controller is a small and lightweight controller designed for the unique requirements of the Texas Instruments TMS320C2000 DSP developers. [more]
Blackhawk USB100v2 Model D
The Blackhawk™ USB100v2 Model D is a very low-cost controller for basic debugging of Texas Instruments DSPs. Requiring no external power source, the USB100v2 Model D can support most of the basic features of higher priced controllers and requires no additional drivers when installed using CCS v4 or later. As an added bonus, Texas Instruments offers Code Composer Studio v4 FREE for use with the USB100v2 Model D.
The Blackhawk™ USB510L JTAG Emulator is a very affordable and full-featured addition to our product lineup for Texas Instruments TMS320, TMS470 (ARM), DaVinci and OMAP families. [more]
Blackhawk XDS560v2-BP (bus-powered)
The XDS560v2-BP design is the next-generation of the high-performance XDS560-class technology first made available by Blackhawk with the USB560/LAN560 and XDS560 Trace. The XDS560v2-BP combines many features and capabilities of earlier Blackhawk XDS560-class emulators such as LAN debugging and Trace. Most important and unique is the ability of the Blackhawk XDS560v2-BP to operate without the need for an external power supply. It is powered from the USB port! [more]
Blackhawk Galvanic Isolation Adapter for 20-pin cTI Target
The Blackhawk Isolation Adapter is a device that connects between your JTAG Emulator and the JTAG connector on your target board. The adapter is designed to minimize and protect connected devices (PC/Emulator/Target) from ground loop voltage, harsh environments and new, untested designs. The Isolation Adapter supports 3.3-5.0v targets and is available with compact TI (cTI) 20-pin JTAG connector. [more]
CY3215-DK ICE CUBE In-Circuit Emulation Development Kit
The PSoC Development Kit includes an In-Circuit Emulator (ICE) which consists of a base unit, USB 2.0 cable, and power supply. The base unit is connected to the host PC via the USB port. The ICE is driven by the Debugger subsystem of PSoC Designer. This software interface allows the user to run, halt, and single step the processor [more]
iC3000 ActiveEmulator
The iC3000 ActiveEmulatorTM is the ultimate tool for high performance micro-controller based embedded applications. It incorporates major innovation in a compact package, covering the widest variety of development environments. The iC3000 supports all famous On-Chip Emulation technologies like BDM, SDI, Once, JTAG and Nexus for On-Chip Debugging. For On-Chip Trace ETM and Nexus solutions are available.
The Keil EPM900 Emulator supports in-circuit debugging and parallel Flash ROM programming for the NXP P89LPC9xx device family. The EPM900 connects directly to the µVision Debugger which provides [more]
Raven High speed parallel port interface for Freescale DSP's
The Raven is a mid-cost interface used in the design, debug, and programming of microprocessor and micro-controller based embedded systems. One side of the Raven interfaces to the parallel port of a [more]
MPLAB® REAL ICE™ In-Circuit Emulator
The MPLAB REAL ICE in-circuit emulator is an in-circuit emulator that is controlled by a PC running MPLAB IDE software on a Windows® platform. [more]
Dev Emulator Base Unit H8S/2100 Series
The E6000 for H8S/2140 incorporates the debugging and emulation features of a full in-circuit emulator at an affordable price. The main features are:
The E6000 emulator for the H8S/233x family incorporates the debugging and emulation features of a full in-circuit emulator at an affordable price. The main features are:
The E6000 emulator for the H8S/2612 family incorporates the debugging and emulation features of a full in-circuit emulator at an affordable price. The main features are:
The E6000 emulator for the H8S/2633 family incorporates the debugging and emulation features of a full in-circuit emulator at an affordable price. The main features are:
The E6000 emulator for the H8S/2646 and H8S/2282 groups incorporates the debugging and emulation features of a full in-circuit emulator at an affordable price. The main features are:
The E6000 emulator for the H8S/2655 group incorporates the debugging and emulation features of a full in-circuit emulator at an affordable price. The main [more]
Dev Emulator Base Unit H8S/2678 Series
E62678 Overview
The E6000 emulator for the H8S/2678 family incorporates the debugging and emulation features of a full in-circuit emulator at an affordable price. The [more]
Dev Emulator Base Unit H8/3064 Series
Overview
The E6000 emulator for the H8/300H family incorporates the debugging andemulation features of a full in-circuit emulator at an affordable price. Themain features [more]
Dev Emulator Base H8Sx/1650
E6000H emulator is a tool to support system development targeted at Renesas microcomputers in aspects software and hardware. E6000H emulator can be used for [more]
Dev Emulator Personality Kit H8SX/1653
The HS1653ECN61H is a user system interface board that connects a user system for the H8SX/1653 TFP-120 package to the H8SX/1650 E6000H emulator. Emulation of the H8SX/1653 group is only possible when this user system interface board is connected to the H8SX/1650 E6000H emulator. [more]
Dev Emulator Base Unit H8S/2166 Series
Overview
The E6000 is a real-time in-circuit emulator from Renesas that has been developed in partnership by Renesas organizations in Japan, Europe and the United States [more]
Dev Emulator Base Unit H8S/2214 +USB I/F
The E6000 for H8S/2214 incorporates the debugging and emulation features of a full in-circuit emulator at an affordable price plus a 256B x 8 block bus monitor function. [more]
Dev Emulator Base Unit H8/3664 Series
The E6000 emulator (targeting H8 Family H8/300H Tiny Series) is a real-time in-circuit emulator from Renesas that has been developed in partnership by Renesas organizations in Japan, Europe and the United States - a true World Tool. [more]
Dev Emulator Base SH7046
The HS7046EPH60H is a E6000H emulator for SH7046, SH7047, SH7048, SH7049, SH7101, SH7104, SH7105, SH7106, SH7107, SH7108, SH7109, SH7144, SH7145 and SH7148 groups. [more]
Dev Compact Emulator M16C/26A (48FPD converter)
Available at affordable prices though, the Renesas´ compact emulator has all the functions needed for the actual development, such as real-time trace and hardware breaks. The emulator main unit comes in a significantly reduced size, compared with conventional emulator systems. [more]
Dev Compact Emulator M16C/28,29
This set package includes the compact emulator and a converter board for the target devices, so, you can program and debug your applications as soon as you open the package. [more]
M3062PT2-Emulation Probe
The emulation probe is user-replaceable MCU-dependent hardware tool for the PC7501 emulator. [more]
Dev M32C/80/84/85/86 Compact Emulator
Available at affordable prices though, the Renesas´ compact emulator has all the functions needed for the actual development, such as real-time trace and hardware breaks. [more]
Dev Emulator Base Unit M16C Platform
The PC7501 emulator has full bus trace and is available for in-circuit emulation in system designed around the M16C Platform of processors. This compact unit is capable of emulation up to 66MHz (i.e., available at over 20MHz) and has many other enhancements of the conventional PC4701U. [more]
Dev Compact Emulator H8/3664
Available at affordable prices though, the Renesas´ compact emulator has all the functions needed for the actual development, such as real-time trace and hardware breaks. [more]
R0E521000CPE00 Compact Emulator
Available at affordable prices though, the Renesas´ compact emulator has all the functions needed for the actual development, such as real-time trace and hardware breaks. [more]
R0E521000EPB00 - Emulation Probe
Overview
The emulation probe is user-replaceable MCU-dependent hardware tool for the PC7501 emulator. Connecting this emulation probe to a PC7501 emulator allows you [more]
Dev Compact Emulator R8C-13
Overview
Available at affordable prices though, the Renesas´ compact emulator has all the functions needed for the actual development, such as real-time trace [more]
Dev Emulator Personality Kit R8C10-13
Overview
The emulation probe is user-replaceable MCU-dependent hardware tool for the PC7501 emulator. Connecting this emulation probe to a PC7501 emulator allows you [more]
Dev Compact Emulator M16C/62P Group
Available at affordable prices, the Renesas compact emulator has all the functions needed for the actual development, such as real-time trace and hardware breaks. The emulator main unit comes in a significantly reduced size, compared with conventional emulator systems. This set package includes the compact emulator and a converter board for the target devices, so you can program and debug your applications as soon as you open the package. [more]
Dev Emulator E200 Main Body
The R0E0200F1EMU00 is a E200F full-spec emulator for SH7080, SH/Tiny, SH7146, SH7147, SH7200, SH7210, SH7260, SH7280 and SH7243 series in the SuperH family. [more]
Emulator Evaluation Chip Unit
The Evaluation chip unit allows debugging without user system. Debugging using AUD for AUD nonsupport device and debugging using AUD for non-mounted H-UDI/AUD connector are available. The [more]
Compact Emulator for H8/36049 FP-80A
Available at affordable prices, the Renesas compact emulator has all the functions needed for the actual development, such as real-time trace and hardware breaks. The emulator main unit comes in a significantly reduced size, compared with conventional emulator systems. This set package includes the compact emulator and a converter board for the target devices, so you can program and debug your applications as soon as you open the package. [more]
Compact Emulator R8C/24/25
Available at affordable prices, the Renesas compact emulator has all the functions needed for the actual development, such as real-time trace and hardware breaks. The emulator main unit comes in a [more]
Compact Emulator R8C/26/27
Available at affordable prices, the Renesas compact emulator has all the functions needed for the actual development, such as real-time trace and hardware breaks. The emulator main unit comes in a [more]
Emulator Personality Kit M16C/23
The emulation probe is user-replaceable MCU-dependent hardware tool for the PC7501 emulator. Connecting this emulation probe to a PC7501 emulator allows you to configure a debugging environment [more]
Emulator Personality Kit - R8C26/27
The emulation probe is user-replaceable MCU-dependent hardware tool for the PC7501 emulator. Connecting this emulation probe to a PC7501 emulator allows you to configure a debugging environment [more]
Emulation Probe for M32C/87 Group
The M30870T-EPB is an emulation probe for M32C/87 Group MCUs. The M30870T-EPB is used by connecting to the PC7501 emulator main unit. This emulation probe contains an evaluation MCU. M30800T-PTC [more]
Dev Compact Emulator M16C/62P,30P Groups
Available at affordable prices, the Renesas compact emulator has all the functions needed for the actual development, such as real-time trace and hardware breaks. The emulator main unit comes in a significantly reduced size, compared with conventional emulator systems. This set package includes the compact emulator and a converter board for the target devices, so you can program and debug your applications as soon as you open the package. [more]
E8a Emulator
he E8a on-chip debugging emulator is a development of the E8, maintaining the same functionality and ease of use whilst reducing both cost to the end user and the size of the unit. The E8a is designed to be used both as an on-chip debugger for M16C Family, H8 Family H8/Tiny and Super Low Power Series, and 740 Family in conjunction with Renesas High-performance Embedded workshop, providing the user with a range of debugging features as well as a handy device programmer. E8a is ideal for the modern development and prototyping environment with programming support for devices from all the main MCU families. [more]
E100 Emulator
Renesas Technology America, Inc.´s E100 full-spec emulator*1, is an expansion of its extensive line of development tools for engineers designing embedded systems that use microcontrollers (MCUs). The E100 improves the system design process by offering enhanced ease of use and performance compared to currently available emulators, while providing advanced debugging capabilities. The new development tool directly addresses the need for more efficient debugging environments, a need mandated by the increased functional complexity of MCU-based products and the shorter development cycle characteristic of highly competitive international markets. The E100 works with new and future devices in the M16C, H8SX, H8S, H8, and R8C families of 8- to 32-bit CISC (Complex Instruction Set Computer) devices and allows real-time in-circuit emulation at bus cycle speeds up to 130MHz. [more]
8051 In- Circuit Emulator
USP-51 is an In-Circuit Emulator for the 8051 family of MCUs that comes with Chameleon Debugger, 128K of emulation memory, 32K of real-time trace memory and complex hardware breakpoints. [more]
ADM51-TRACE-CE Emulator for Teridian 8015 MCUs
ADM51-TRACE-CE is a small, palm-sized In-Circuit Debugger with real-time trace memory and complex events for the Teridian (Maxim) 8051 family of MCUs for energy measurement (power meters), smart card readers and circuit breakers. It is equipped with a USB 2.0 port (USB 1.1 compatible) that runs in the high-speed mode at 480Mbps.
ADM51-TRACE is a small, palm-sized In-Circuit Debugger with real-time trace memory for the Teridian (Maxim) 8051 family of MCUs for energy measurement (power meters), smart card readers and circuit breakers. It is equipped with a USB 2.0 port (USB 1.1 compatible) that runs in the high-speed mode at 480Mbps.
ADM51 is a small, palm-sized In-Circuit Debugger for the Teridian (Maxim) 8051 family of MCUs for energy measurement (power meters), smart card readers and circuit breakers. It is equipped with a USB 2.0 port (USB 1.1 compatible) that runs in the high-speed mode at 480Mbps.
