RFM Zigbee (2.4 GHz) Developer Kit include the technology hardware and software to support the development and integration of RFM RF Modules into any machine-to-machine (M2M) application.

Quickly Add Standards-Based Connectivity Into Products Best-in-class WLAN and Bluetooth co-existence technology on a single-chip.Minimal external circuitry required to complete a radio design.Drivers

Everything you need to get a Wi-Fi wireless sensor node and running in minutes. The WSN802GDK kit allows for full demonstration or development of the RFM WSN802G transceiver modules. The WSN802G trans

Everything you need to get a 4 node network up and running in minutes

4 developer kit boards providing a simple means to interface to your device

XG2510HE gateway to control th

[more]

The DNT90DK contains:

• (2) DNT90 modules with pins,
• (2) DNT90 development boards,
• (2) USB cables,
• (2) Serial cables, Antennas and
  [more]

The DNT900 FHSS transceiver module is a low cost, high-power solution for point-to- I/O point and point-to-multipoint wireless systems in the 900 MHz ISM band. The RF output power of the DNT900 can be

The DNT2400 Development Kit is available as part number: DNT2400DK
The DNT2400 FHSS transceiver module is a low cost, high-power solution for point-to- I/O point and point-to-multipoint wireles

Each WIT OEM Module Developer’s Kits contain two selfcontained wireless modems built around specific OEM 910ules. Additionally, two OEM modules are included in the kit. The self-contained units

Each WIT OEM Module Developer’s Kits contain two selfcontained wireless modems built around specific OEM modules. Additionally, two OEM modules are included in the kit. The self-contained units

Each WIT OEM Module Developer’s Kits contain two selfcontained wireless modems built around specific OEM modules. Additionally, two OEM modules are included in the kit. The self-contained units

Each WIT OEM Module Developer’s Kits contain two selfcontained wireless modems built around specific OEM modules. Additionally, two OEM modules are included in the kit. The self-contained units

Each WIT OEM Module Developer’s Kits contain two selfcontained wireless modems built around specific OEM modules. Additionally, two OEM modules are included in the kit. The self-contained units

Each WIT OEM Module Developer’s Kits contain two selfcontained wireless modems built around specific OEM modules. Additionally, two OEM modules are included in the kit. The self-contained units

Each WIT OEM Module Developer’s Kits contain two selfcontained wireless modems built around specific OEM modules. Additionally, two OEM modules are included in the kit. The self-contained units

This kit comprises two high power serial interface boards built around the 100mW ZigBee ZMN2405HP module. The ZMN2405DK allows developers to get up and running quickly using either USB or RS-232 inter

The ZMN2430ADK Developer’s Kit comprises two high power serial interface boards built around the 1mW ZigBee ZMN2430A module. The ZMN2430ADK allows developers to get up and running quickly using

The ZMN2430HPADK Developer’s Kit comprises two high power serial interface boards built around the 100mW ZigBee ZMN2430HPA module. The ZMN2430HPADK allows developers to get up and running quickl

The LPR2430ADK kit allows for full demonstration or development of the LPR2430 transceiver modules. The LPR2430 series transceivers provide a low cost solution for point-to-point, pointtomultipoint an

The LPR2400DK kit allows for full demonstration or development of the LPR2430 transceiver modules. The LPR2430 series transceivers provide a low cost solution for point-to-point, pointtomultipoint and

The LPR2430ERADK kit allows for full demonstration or development of the LPR2430 transceiver modules. The LPR2430 series transceivers provide a low cost solution for point-to-point, pointtomultipoint

The LPR2430ERDK kit allows for full demonstration or development of the LPR2430 transceiver modules. The LPR2430 series transceivers provide a low cost solution for point-to-point, pointtomultipoin

RFM´s "A" series ASH Transceiver Development Kits demonstrate operation at an "air" data rate of 2 kbps, using a packet data link layer (MAC) protocol implemented in an 80

The WSN802GDK-A kit allows for full demonstration or development of the WSN802G transceiver modules. The WSN802G transceiver module is a low cost, robust solution for 802.11g sensor networks. The W

RFM´s standard ASH Transceiver Development Kits demonstrate operation at an "air" data rate of 22.5 kbps, using a packet data link layer (MAC) protocol implemented in an 8051 microp

RFM´s "A" series ASH Transceiver Development Kits demonstrate operation at an "air" data rate of 2 kbps, using a packet data link layer (MAC) protocol implemented in an 80

RFM´s standard ASH Transceiver Development Kits demonstrate operation at an "air" data rate of 22.5 kbps, using a packet data link layer (MAC) protocol implemented in an 8051 microp

RFM´s "A" series ASH Transceiver Development Kits demonstrate operation at an "air" data rate of 2 kbps, using a packet data link layer (MAC) protocol implemented in an 80

RFM´s standard ASH Transceiver Development Kits demonstrate operation at an "air" data rate of 22.5 kbps, using a packet data link layer (MAC) protocol implemented in an 8051 microp

RFM SAW-Based Radio Products include RFM second and third generation ultra-low-power, proprietary amplifier-sequenced hybrid (ASH) radio architecture. RFM SAW-Based radios are inte

The DR7000-DK kit allows for full demonstration or development of the third-generation (3G) TR7000 Virtual Wire device. The kit provides “Out of the box” operation with or without the a

The DR7001-DK kit allows for full demonstration or development of the third-generation (3G) TR7001 Virtual Wire device. The kit provides “Out of the box” operation with or without the a

The DR7002-DK kit allows for full demonstration or development of the third-generation (3G) TR7002 Virtual Wire device. The kit provides “Out of the box” operation with or without the a

The DR7003-DK kit allows for full demonstration or development of the third-generation (3G) TR7003 Virtual Wire device. The kit provides “Out of the box” operation with or without the a

The DR8000-DK kit allows for full demonstration or development of the third-generation (3G) TR8000 Virtual Wire device. The kit provides “Out of the box” operation with or without the a

The DR8001-DK kit allows for full demonstration or development of the third-generation (3G) TR8001 Virtual Wire device. The kit provides “Out of the box” operation with or without the a

The DR8100-DK kit allows for full demonstration or development of the third-generation (3G) TR8100 Virtual Wire device. The kit provides “Out of the box” operation with or without the a

The TRC103 Development kits allow for complete evaluation and application development of RFM’s SRR (Short Range Radio) line of RFIC’s. A communication link or Range Test can be executed

The TRC103 Development kits allow for complete evaluation and application development of RFM’s SRR (Short Range Radio) line of RFIC’s. A communication link or Range Test can be executed

The TRC103 Development kits allow for complete evaluation and application development of RFM’s SRR (Short Range Radio) line of RFIC’s. A communication link or Range Test can be executed

The TRC104 Development kits allow for complete evaluation and application development of RFM’s SRR (Short Range Radio) line of RFIC’s. A communication link or Range Test can be executed

The TRC105 Development kits allow for complete evaluation and application development of RFM’s SRR (Short Range Radio) line of RFIC’s. A communication link or Range Test can be executed

The TRC105 Development kits allow for complete evaluation and application development of RFM’s SRR (Short Range Radio) line of RFIC’s. A communication link or Range Test can be executed

The TRC105 Development kits allow for complete evaluation and application development of RFM’s SRR (Short Range Radio) line of RFIC’s. A communication link or Range Test can be executed

The TRC105 Development kits allow for complete evaluation and application development of RFM’s SRR (Short Range Radio) line of RFIC’s. A communication link or Range Test can be executed

The TRC105 Development kits allow for complete evaluation and application development of RFM’s SRR (Short Range Radio) line of RFIC’s. A communication link or Range Test can be executed

The TRC105 Development kits allow for complete evaluation and application development of RFM’s SRR (Short Range Radio) line of RFIC’s. A communication link or Range Test can be executed

The TRC105 Development kits allow for complete evaluation and application development of RFM’s SRR (Short Range Radio) line of RFIC’s. A communication link or Range Test can be executed

The TRC105 Development kits allow for complete evaluation and application development of RFM’s SRR (Short Range Radio) line of RFIC’s. A communication link or Range Test can be executed