The complexity of embedded software projects today is growing at an astounding rate. To handle these demands, American Arium offers a number of hardware-assisted debug solutions. SourcePoint, [more]
AVR® ONE!
The AVR® ONE! is a powerful development tool for on-chip debugging and programming of all AVR32 devices. In the future AVR ONE! will also support all new AVR family devices.
Suppported debug interfaces are JTAG (IEEE 1149.1), debugWire, PDI and the Nexus (IEEE-ISTO 5001(TM)-2003) auxiliary interface for high-speed trace. Supported programming interfaces are ISP, JTAG and PDI. Interfaces with AVR32 Studio 2 and newer. [more]
Cyclone Pro In-Circuit Debugger/Programmer
The Cyclone Pro provides all the capabilities of the BDM Multilink plus USB/Ethernet interfaces, the ability to function as a standalone programmer with pushbuttons and LEDs to control operation, and support for all MON08 HC08s and BDM HCS08s and HCS12s. [more]
µVision Debugger
The µVision Debugger from Keil supports simulation using only your PC or laptop, and debugging using your target system and a debugger interface. µVision includes traditional features like simple and complex breakpoints, watch windows, and execution control as well as sophisticated features like trace capture, execution profiler, code coverage, and logic analyzer. [more]
JTAG Commander
Take full control of your JTAG scan chain and all the devices on it. A low-level utility to do anything you need to do during test and debug of your JTAG enabled target. [more]
J-SCAN - the ultimate JTAG debugger
J-SCAN has become a top choice of hundreds of hardware design engineers and test technicians for JTAG boundary scantest and flash programming. [more]
usb2Demon™ USB interface for JTAG & BDM
The usb2Demon™ is a Universal Serial Bus interface for JTAG and BDM debugging. Faster than a Wiggler or a Raven, it is a stable, easy to use device and is fully compatible with all of our software. [more]
Raven High speed parallel port interface for JTAG or BDM debugging
The Raven is a parallel port interface for either JTAG or BDM debugging. Faster than a Wiggler, it is a stable, easy to use device and is fully compatible with all of our software. [more]
Wiggler
The Wiggler is a parallel port interface for either JTAG or BDM debugging. Slower than a Raven, it is however a stable, easy to use device and is fully compatible with all of our Windows software. [more]
mpDemon™ ethernet, serial, and parallel port interface
The Macraigor Systems´ mpDemon™ provides the embedded systems developer with the most advanced and intelligent target interface available for target on-chip debugging [more]
PICkit™ 2 Debug Express
PICkit 2 Debug Express allows in-circuit debugging on selected PICmicro microcontroller units (MCUs). In-circuit debugging allows the designer to run, examine, and modify the program while the PICmicro MCU is embedded in the hardware, thereby assisting the designer in debugging the firmware and hardware together. Debug Express interacts with MPLAB IDE software. Programs can be run, stopped, and single-stepped. One breakpoint can be set and the processor can be reset. Register contents can be examined and modified when the processor is stopped. Debug Express requires MPLAB IDE version 7.40 or later. [more]
Arriba Debugger for MIPS
The Arriba Linux Debugger for MIPS-Based™ systems was developed by MIPS Technologies in cooperation with Viosoft Corporation. It is available exclusively from MIPS Technologies as an Eclipse plug-in for the MIPS Navigator™ ICS (Integrated Component Suite) or for any Eclipse-based Integrated Development Environment (IDE). It provides developers with the ability to debug the Linux kernel as well as Linux drivers, loadable modules and applications.
Debug access to your choice of ARM, XScale and PowerPC derivatives is provided with the Universal Access Device 2+, the new all-in-one add-on interface hardware for Universal Debug Engine.
With a powerful 32-bit Communication Unit based Universal Access Device 2 (UAD2), pls presents an extremely rapid and flexible communication tool to access a multitude of popular 16 and 32-bit microcontrollers.more]
Universal Access Device 2 - compact
Universal Access Device 2compact is a new member of the UDE Access Device family and offers a high-end solution at a starter price. [more]
UDE MemTool Utility - Tool for FLASH Memory Programming and OTP Memory Programming
UDE MemTool is designed for On-Chip FLASH/OTP programming and On-Board FLASH programming with microcontroller hardware systems using ARM, XScale and PowerPC derivatives. UDE MemTool runs under Windows [more]
Universal Debug Engine - High Level Language Debugger Tool
The Flexible Debug Platform with Multi-core Debugging.The Universal Debug Engine (UDE) is one of the most powerful development workbenches or ARM7, ARM9, Cortex,XScale and PowerPC
SofTec Microsystems provides low-cost tools with everything you need to get started developing applications for a range of ST7 microcontrollers, and with powerful capabilities to make debugging and [more]
RealView ICE-ME in-circuit debugger programmer
The RealView Developer Kit for ST is a complete development and debugging kit for designing applications for the STR7 and STR9 families of ARM core-based microcontrollers. The kit provides a complete [more]
Innovator
Innovator is a powerful, fully integrated tool environment for developing, running and debugging virtual platforms. It comes with full SystemC™ (IEEE 1666) support. Virtual platforms are fully functional software models of complete embedded systems, enabling pre-silicon software development and software-driven system validation. The ability to parallelize the hardware and software development effort through virtual platforms significantly reduces the product design cycle and speeds time to market. [more]
Virtual Platform
Virtual platforms are software models of complete systems that provide software engineers with high-speed, pre-silicon software execution environments that allow the development of SoC-related software before hardware is available. These models are available up to 9 to 12 months prior to the hardware they simulate. Virtual platforms allow concurrent development of hardware and software, and significantly shorten the hardware/software integration - key advantages for system suppliers and developers to accelerate their products to market. [more]
DesignWare® System-Level Library
DesignWare System-Level Library models significantly reduce the time to create virtual platforms and are written in SystemC to work in any IEEE 1666 (SystemC)-compliant simulation environment. Virtual platforms are fast, full-function simulation models of hardware that enable development and integration of software months before hardware is available. [more]
MSP430 USB Debugging Interface
The MSP-FET430U14 is a powerful flash emulation tool to quickly begin application development on the MSP430 MCU. It includes USB debugging interface used to program and debug the MSP430 in-system through the JTAG interface or the pin saving Spy Bi-Wire (2-wire JTAG) protocol. The flash memory can be erased and programmed in seconds with only a few keystrokes, and since the MSP430 flash is ultra-low power, no external power supply is required. [more]
LinuxLink
LinuxLink is a software development framework for embedded Linux products. It provides users with an interactive, step-by-step wizard that allows them to develop a custom Linux platform by selecting from a wide range of available kernels, tools, middleware packages and boot loaders. The wizard guides the user through the process of chosing the software components most applicable for their end appilcation, then builds a custom image ready to run on the target system. Automatic updates are provided for the user´s custom image, along with Linux technical support from experienced engineers and comprehensive user documentation.
