The STK600-TQFP64 package contains a socket board and adapter boards for 64-pins TQFP 0.8 mm pitch devices, and is an expansion module for STK600. [more]
ATmega128RFA1 Evaluation Kit
The ATmega128RFA1 evaluation kit enables development, debugging and demonstration of IEEE 802.15.4 compliant wireless applications such as ZigBee and 6LoWPAN. The kit contains two evaluation boards for the ATmega128RFA1 device, covering the 2.4GHz ISM bands for use with STK600. [more]
ATAVRRZ600 TX/RX Evaluation Kit
The RZ600 evaluation kit enables development, debugging and demonstration of IEEE 802.15.4 compliant wireless applications such as ZigBee and 6LoWPAN. [more]
ATSTK520
The ATSTK520 board is a hardware expansion module for the ATSTK500 Starter Kit. It adds support for the 24-pin and 32-pin AT90PWM AVR family. [more]
STK600-RC14
The STK600-RC14 package contains a socket board and adapter boards for 64TQFP devices, and is an expansion module for STK600. [more]
STK600-RC23
The STK600-RC23 package contains a socket board and adapter boards for SOIC ATTINY167 devices, and is an expansion module for STK600. [more]
STK600-SOIC
Generic STK600 socketcard for SOIC14/20/24/32 Wide. [more]
STK600-TINYX3U
Part specific socketcard for ATtiny43U in SOIC package [more]
STK600-TQFP48
Generic STK600 socketcard for devices in TQFP48 package, 0.5 Pitch, 7x7 Body Size. [more]
STK600-TQFP64-2
Generic STK600 socketcard for devices in TQFP64 package, 0.5 Pitch, 10x10 Body Size. [more]
STK600-UC3A0X-144
The STK600-UC3-144 is a socket board and expansion module for STK600, supporting the AT32UC3A 144-pins TQFP devices.
Converts the standard 2x7 14-pin JTAG connector found on most XDS510 emulators to the 20-pin compact TI (cTI) target header. [more]
Blackhawk 14-Pin to 60-pin (Trace) Adapter
Converts the standard 2x7 14-pin JTAG connector found on most XDS510 emulators to the 60-pin high-density XDS560 Trace header. [more]
Blackhawk 20cTI to 14 Pin Adapter
Converts an emulator´s 20-pin Compact TI (cTI) header to the standard 2x7 14-pin target header. [more]
Blackhawk 20-pin cTI to 20-pin ARM Adapter
Converts an emulator´s 20-pin Compact TI (cTI) header to the 20-pin ARM JTAG header. [more]
Blackhawk 20-pin cTI to 60-pin Trace Header
Converts an emulator´s 20-pin Compact TI (cTI) header to the 60-pin high-density XDS560 Trace header. [more]
RCB Breakout Board RS232 Cable
Adapter cable to connect any RCB Breakout Board to a COM port [more]
deRFtoRCB Adapter
Interface adapter for deRFmega128 and deRFmega128UFL to RCB [more]
SAM-ICE Adapter
The SAM-ICE Adapter is a programming adapter for deUSB radio sticks Interface adapter for JTAG and RS232 for easy programming and debugging of the deUSB radio stick. [more]
RS232 Level Shifter
Shifter of TTL-level RS232 to standard RS232 level [more]
3.2 inch QVGA Color LCD
3.2 inch color QVGA LCD with integrated display controller and flexible interface options [more]
TWR-SER
Serial module with RS232/RS485, Ethernet, CAN, USB [more]
USB Multi-Protocol Converter (MDIO & I2C)
This Windows-based USB to Multi-Protocol Converter provides multiple communications capabilities supporting I2C & MDIO. The USB-MPC product makes it easy to work with and develop with these interfaces. USB-MPC allows users the option to program with Visual C/C++ or other programming environments that support DLLs. USB-MPC interfaces to the standard USB (V1.1 or V2.0) Port on any PC and allows bi-directional communications. [more]
3.6" QVGA Display Kit
The Zoom ™ Display Kits are ready-to-use liquid crystal displays (LCDs) that can be immediately connected to Zoom ™ Development Kits. The 3.6” display kit includes bezel, backlight, 4-wire resistive touch panel, and ribbon cable. The 4.3” display includes 4-wire resistive ouch anel and an LCD connector built into the PCB. [more]
6.4" VGA Display Kit
The Zoom ™ Display Kits are ready-to-use liquid crystal displays (LCDs) that can be immediately connected to Zoom ™ Development Kits. The 3.6” display kit includes bezel, backlight, 4-wire resistive touch panel, and ribbon cable. The 4.3” display includes 4-wire resistive touch panel and an LCD connector built into the PCB. [more]
4.3" WQVGA Display Kit
The Zoom ™ Display Kits are ready-to-use liquid crystal displays (LCDs) that can be immediately connected to Zoom ™ Development Kits. The 3.6” display kit includes bezel, backlight, 4-wire resistive touch panel, and ribbon cable. The 4.3” display includes 4-wire resistive touch panel and an LCD connector built into the PCB. [more]
QVGA TFT for OM10100
3.2 inch color QVGA LCD with integrated display controller and flexible interface options [more]
Dev Emulator PCB Adaptor 144-TQFP
User system interface cable (HS2168ECN61H) for the Renesas original microcomputer H8S/2168 group. The HS2168ECN61H is a user system interface cable that connects an H8S/2168 group E6000 emulator to the IC socket for a TFP-144 package on the user system. [more]
Dev Emulator PCB Adaptor 64-QFP
The HS2212ECH61H is a user system interface cable that connects an H8S/2214 series E6000 emulator to the IC socket for a FP-64E package for the H8S/2212 series MCU on the user system. The user system interface cable should be used with H8S/2214 series E6000 emulator. [more]
Dev Emulator PCB Adaptor 100-QFP
User system interface cable (HS2218ECN61H) for the Renesass original microcomputer H8S/2218 series. The HS2218ECN61H is a user system interface cable that connects an H8S/2214 series E6000 emulator to the IC socket for a TFP-100G package for the H8S/2218 series MCU on the user system. [more]
Dev Emulator PCB Adaptor 100-QFP
User system interface cable (HS2238ECH61H) for the original microcomputer H8S/2237, 2238 series. The HS2238ECH61H is a user system interface cable that connects an H8S/2633 series E6000 emulator to the IC socket for a QFP-100B or TQFP-100B package (package code: FP-100B or TFP-100B) for the H8S/2237, H8S/2238 series MCU on the user system. [more]
Dev Emulator PCB Adaptor 64-QFP
User system interface cable (HS36014ECH61H) for the original microcomputer H8/36014. The HS36014ECH61H is a user system interface cable that connects the H8/36014 series E6000 emulator to the IC socket for a FP-64E package for the H8/36014 series MCU on the user system. [more]
Dev Emulator Accessory H8/36024 Series
The H8/36024, H8/36049 group E6000 expansion I/O board (HS36024EIO61H) is an efficient software and hardware development support tool for application systems using channel 3 of Renesass original [more]
H8/36049 Group FP-80A User System Interface Cable for E6000 Emulator
User system interface cable (HS36049ECH61H) for the Renesass original microcomputer H8/36049 group. The HS36049ECH61H is a user system interface cable that connects an H8/36049 group E6000 emulator [more]
H8/3687 Series FP-64A User System Interface Cable for E6000 Emulator
User system interface cable (HS3687ECH62H) for the original microcomputer H8/3687 Series. The HS3687ECH62H is a user system interface cable that connects an H8/3687 Series E6000 emulator to the IC [more]
H8/3802 Group FP-64A User System Interface Cable for E6000 Emulator
User system interface cable (HS3802ECH61H) for the Renesass original microcomputer H8/3802, H8/38004 group. The HS3802ECH61H is a user system interface cable that connects an H8/3802, H8/38004 group [more]
H8/3887 Series FP-100B/TFP-100B User System Interface Cable for E6000 Emulator
User system interface cable (HS3887ECH61H) for the original microcomputer H8/3887 series. The HS3887ECH61H is a user system interface cable that connects an H8/3864 series, H8/3887 series E6000 [more]
Dev Emulator USB Interface
This USB adapter provides USB connection of the E6000/E6000H/E8000 emulator to a personal computer incorporating Windows with the USB interface, enabling program debugging through an HDI or the High-performance Embedded Workshop. [more]
The M3062PT-80FPB is a converter board for connecting the 160-core flexible cable FLX160 to a foot pattern for 80-pin 0.65-mm-pitch QFP (80P6S-A). The M3062PT-80FPB can be used for debugging and onboard evaluation in common by mounting the NQPACK080SB on the target system. [more]
Dev Emulator Probe M16C/6N
The emulation probe is user-replaceable MCU-dependent hardware tool for the PC7501 emulator. Connecting this emulation probe to a PC7501 emulator allows you to configure a debugging environment for your target system. [more]
Dev Emulator PCB Adapter 100-LQFP
The M3T-F160-100NSD is a converter board for connecting the 160-core flexible cable FLX160 to a foot pattern for 100-pin 0.5-mm-pitch LQFP (100P6Q-A). The M3T-F160-100NSD can be used for debugging and board-mounted evaluation in common by mounting the NQPACK100SD-ND on the target board. [more]
Converter Board for Connecting FLX160 to 128-pin 0.5-mm-pitch LQFP
The M3T-F160-128NRD is a converter board for connecting the 160-core flexible cable FLX160 to a foot pattern for 128- pin 0.5-mm-pitch LQFP (128P6Q-A). The M3T-F160-128NRD can be used for debugging and board-mounted evaluation in common by mounting the NQPACK128RD on the target system. [more]
Converter Board for Connecting FLX160 to 144-pin 0.5-mm-pitch LQFP
The M3T-FLX-144NSD is a converter board for connecting the 160-core flexible cable FLX160 to a foot pattern for 144-pin 0.5-mm-pitch LQFP (144P6Q-A). The M3T-FLX-144NSD can be used for debugging and board-mounted evaluation in common by mounting the NQPACK144SD-ND on the user system. [more]
H8S/2378 Series FP-144H User System Interface Cable for E6000 Emulator
User system interface cable (HS2378ECH61H) for the Renesass original microcomputer H8S/2378 Series. The HS2378ECH61H is a user system interface cable that connects an H8S/2678R Series E6000 emulator [more]
H8/3694, H8/36014 Group TNP-48 User System Interface Cable for E6000 Emulator
User system interface cable (HS36014ECN61H) for the Renesas original microcomputer H8/3694 group and H8/36014 group. The HS36014ECN61H is a user system interface cable that connects an H8/3694 group, [more]
SH7085 Group PLQP0144KA-A User System Interface Board
SuperH Family / SH7080 Series / SH7085 Group
The R0E570850CFK00 is a user system interface board that connects a user system for the SH7085 PLQP0144KA-A (former code: FP-144LV) [more]
SH7124 Group PLQP0048JA-A User System Interface Board
SuperH Family / SH7125 Series / SH7124 Group
The R0E571240CFJ00 is a user system interface board that connects a user system for the SH7124 PLQP0048JA-A (former code: FP-48FV) package to the E200F [more]
Dev PCB Adapter 100-pin .65-mm-pitch QFP
Converter for Connecting 160-core Flexible Board FLX160 to 100-pin 0.65mm-pitch LCC (for M16C family). This converter connects the 160-core flexible board (FLX160) and the socket for 100-pin 0.65mm-pitch LCCs (100D0). Use the converter when you have a 100-pin 0.65mm-pitch LCC socket mounted on the target system. [more]
SmartProbe HDT+ Adaptor
Allows Sage SmartProbe JTAG In-circuit Emulator to connect to boards using the AMD legacy HDT+ interface. [more]
J-Link ARM-14
Adapter for ARM targets with 14-pin 0.1" mating JTAG connectors. Includes a 14-pin ribbon cable. [more]
J-Link 9-Pin Cortex-M Adapter
The J-Link 9-Pin Cortex-M Adapter converts the 20-pin, 0.1 inch standard connector to a 9-pin, 0.05 inch Cortex-M connector. Includes a Cortex-M 9-pin cable. [more]
JTAG Isolator
The J-Link JTAG Isolator can be connected between the J-Link ARM and any ARM-board that uses the standard 20-pin JTAG-ARM connector to provide electrical isolation. This is essential when the development tools are not connected to the same ground as the application. It is also useful to protect the development tools from electrical spikes that often occur in some applications, such as motor control applications. A 20-pin flat cable (supplied with the J-Link) is needed to connect the target. [more]
J-Link 19-Pin Cortex-M Adapter
The J-Link 19-Pin Cortex-M Adapter converts the 20-pin, 0.1 inch standard connector to a 19-pin, 0.05 inch Cortex-M connector. Includes a Cortex-M 19-pin cable. [more]
Tag-Connect SPY-BI-TAG adaptor for MSP430 SPY-BI-WIRE JTAG connections
SPY-BI-TAG is an adaptor board the plugs directly into TI´s FET430 and compatible debuggers and allows Tag-Connect TC2030-MCP Plug-of-Nails(tm) cables to be used to provide an MSP430 SPY-BI-WIRE JTAG connection. [more]
TC2030-CLIP Retaining Clip Board for TC2030 cables
Retaining Clip Board that allows Tag-Connect TC2030 family "No Leg" cables to be retained in place to facilitate debugging or programming operations. [more]
Tag-Connect Plug-of-Nails™ Cable for use with TI’s MSP-FET430 for all MSP430 family MCU’s.
Tag-Connect’s TC2050-IDC-430 cable is a special version of the TC2050-IDC Plug-of-Nails™ cable designed to be plugged directly into TI’s MSP-FET430 and is compatible with all MSP430 MCU’s. The cable is fitted with a spring-pin Tag-Connector that conveniently plugs directly into your PCB and terminates in a 14-pin 0.1” ribbon connector
Plugs straight to your PCB - No mating connector or header required!
Requires only a tiny footprint of pads and locating holes in your PCB.
Footprint MUCH smaller than the standard 14-pin ribbon header!
Zero Cost Per Board!
High-Reliability Spring-Pins make a Secure Connection and are rated for over 100,000 operations
Footprint has no height and reduces the size and space requirements of your PCB.
Also available in space-saving “no-legs” version (TC2050-IDC-430-NL).
Tag-Connect 10-pin “No Legs” Plug-of-Nails™ Cable with ribbon connector for generic JTAG use.
Tag-Connect 10-pin Plug-of-Nails™ “No Legs” Cable with ribbon connector for generic JTAG use. Tag-Connect cables provide a simple, reliable means of connecting Debuggers and Programmers or other test equipment to your PCB’s while lowering board costs and facilitating efficient production programming. [more]
Tag-Connect 10-pin Plug-of-Nails™ Cable with ribbon connector for generic JTAG use.
Tag-Connect’s TC2050-IDC Plug-of-Nails™ Cable is a 10-conductor cable fitted with a spring-pin Tag-Connector that conveniently plugs directly into your PCB and terminates in a 0.1” ribbon connector.
Plugs straight to your PCB - No mating connector or header required!
Requires only a tiny footprint of pads and locating holes in your PCB.
Zero Cost Per Board!
Tiny Footprint!
High-Reliability Spring-Pins make a Secure Connection and are rated for over 100,000 operations
Footprint has no height and can reduce the size and space requirements of your PCB.A great way to make test and debug signals available at no cost and with minimal board space.
Also available in space-saving “no-legs” version (TC2050-IDC-NL).
Tag-Connect 6-Pin In-Circuit Plug-of-Nails(TM) Cable (10") for use with Microchip and Compatible Debuggers utilizing an RJ12 modular jack. Can also be used with many other MCU families and programmable devices.
No mating connector or header required on your PCB! Plugs directly into a tiny footprint of pads and holes on your PCB. Zero Cost Per Board! Tiny Footprint! High-Reliability Spring-Pins for Secure Connection are rated for over 100,000 operations Footprint has no height and can reduce the size and space requirements of your PCB. Tag-Connect is a trusted Microchip Premier 3rd Party Tool Provider.
