Extend the capabilities of the Hitex LPC-Stick with the LPC-COM extension board!
The LPC-COM extension board provides a set of communication features and pinouts (e.g. Ethernet and Phy, USB Host and Device, UART, SDCard, CAN phy, external power).
With the LPCStickView control software included in the LPC-Stick package (sold separately) the features of the LPC-Stick and the features of the Extension Boards can be controlled. E.g. Web server application, USB device, USB host and CAN functions are ready to use from the demo application. Optional external power can be obtained to build standalone running applications.
The features of the LPC-COM board are summarized as follows:
• 2x40-pin 0.635mm pitch PCB extension Stick-I/O-connector for the LPC-Stick • 2x24-pin IO connector pads with reset and IRQ capability • USB-B connector with ESD protection IP4220CZ6 (NXP) • USB-A connector with Power-Controller LM3526M-L (National) • RS232 driver chip MAX3232ECDB (TI) • Ethernet Phy with RMII interface DP83848CVV (National) • CAN physical driver chip TJA1050T (NXP) • USB-powered via stick or from external USB-B or IO- connector with jumper selection • Dimensions: appr. 70 x 95mm
