The CDS system is designed to aid hardware and software developers of thePowerQUICC™ III family by providing an evaluation platform for MPC8555E, and MPC8541E derivatives in the 783-pin FC-PBGA package.
The CDS system is preloaded with U-boot and Linux BSP, it has 256MB DDR SDRAM DIMM module, 2 banks of Flash 64Mb each. The on-board interfaces include JTAG/COP, USB, Dual UART, Dual PCI, 10/100/1000 Base-T Fast Ethernets interface, and a 155 Mbps ATM UNI with optical interface.
Using the CDS System on-board resources and an associated debugger, developers are able to download and run code, set breakpoints, display memory andregisters, and connect proprietary hardware via the expansion connectors. That codecan then be incorporated into a desired system with the MPC85xx processor.
Who should order this product?
Developers using an MPC8555E, or MPC8541E
Features
Supports DDR-I
Supports 8-bit Multi-PHY UTOPIA Level 2 with UTOPIA ADTECH interface
10/100 Base-T Ethernet port on FCC2
Dual RS232 serial ports
Dual PCI 32 bit bus or single 64 bit PCI bus @ 3.3 V / 66 MHz.
Dual USB ports
Supports one or more Power QuiccIII family processors
Debug interface JTAG header, Monitoring LEDs, Mictor header for local bus debug
I2Cbus: Configuration control, SPD, Voltage monitoring
Programmable power supply via I2C configuration
Supports four Ethernet ports MII/GMII (10/100, or 1G rate)
Supports optical OC3/OC12 or 10/100 console Ethernet
Adtech connector for OC12 ATM port.
60x and I/O ports expansion connectors PQIII derivative
