The MPC8349E Modular Development System (MDS) is designedto aid hardware and software developers using thePowerQUICC II Pro MPC8349E family. The MPC8349E MDS iscomprised of three discrete hardware modules: TheMPC8349E Processor Board, the PowerQUICC Platform I/OBoard and the PowerQUICC PMC to PCI module. The system alsoallows for optional USB and PCI Expansion module interfaces.

Features

The MPC8349 Processor board can be used as a stand alone development board that supports the following features:

•  MPC8349E processor @533MHz
•  MByte DDR-1 333MHz(supports optional ECC memory)
•  64-Bit PCI Edge Connector (3.3V & 5V)
•  Two RJ-45 G-Ethernet ports
•  USB 2.0 High Speed Device/Host/OTG port
•  Dual RS232 ports
•  Local Bus Interface with
  •  8Mbyte Flash (expandable)
  •  Board Control and Status Registers (BCSR) in FBGA
•  Riser Connectors to Platform I/O Board
•  JTAG Debug Port
•  I2C port with
  •  256Kb EEPROM
  •  Real-Time Clock (RTC)
  •  SODIMM SPD EEPROM
•  PCI add-in standard card form factor (321x106mm2)

The MPC8349E MDS Platform I/O Board is an AdvancedTCA form factor with 4 PMC slots. The Platform I/O board, along with the expansion modules, increase development capabilities. For example:

•  PCI Host mode (3.3V 32&64 bit bus) with single agent (w/ PCI PMC card & PIB)
•  Access to 2nd USB Port (w/ USB PMC card & PIB)
•  Additional USB PHYS (UTMI, ULPI & Serial OTG)
•  PCI Host mode (3.3V 32&64 bit bus) with multiple agents (w/PCI expansion card & PIB)

MPC8349E-MDS kit includes:

 MPC8349E-MDS-PB - Processor board for the MPC8349E Family

•  AC/DC 5V/5A universal power supply kit
•  RS232 9-pin standard serial cable
•  Freescale adaptor cable (with RJ45 and RS232 connectors)
•  Mini USB adaptor
•  USB cable (with standardA and miniB connectors)
•  Ethernet cable (RJ45-8 pin connector) (qty 2)
•  Plastic spacer sets Qty 4
•  PCI Panel for MPC8349E-MDS-PB Board
•  SW CodeWarrior kit (includes JTAG connectivity unit)
•  HW Getting Started Guide
•  CD: User Information
•  Board Errata doc. for the MPC8349E-MDS-PB Board
  

 PQ-MDS-PIB - Platform I/O Board for the 83xx Family

•  AdvancedTCA form factor with 4 PMC slots
•  Allows user to expand the functionality of the MPC8349E-MDS-PB when used in conjunction with the module cards.
•  PQ- MDS- PIB Board Kit
  •  Power cable extension with on-off switch
  •  25 Pin IEEE 1284 Parallel cable
  •  Serial cable 10cm D25M to IDC10
  •  Parallel cable 10cm D25M to IDC26F
  •  RJ45 to IDC8F Cable (qty 2)
  •  LC Loop back 62.5/125Fiber (qty 2)
  •  USB Cable StndA Plug to MiniB 1Meter
  •  USB Cable MiniA Plug to StndB 1.5Meter 1
  •  PMC Board assembly spacers (qty 16)
  •  AC/DC Power Supply 48V/2.7A
  •  PQ- MDS- PIB Getting started guide
  •  PQ- MDS- PIB Board Errata
  •  PQ- MDS- PIB Documentation CD
    

 PQ-MDS-PMCPCI - PMC to PCI module card adaptor for the 83xx Family

•  Ability to plug in one PCI card
•  Supports 3.3V 32 & 64 bit PCI Bus.
  

 PQ-MDS-USB - USB expansion module for the 83xx Family (Available Seperately)

•  Access to 2nd USB port
•  Additional USB phys (UTMI, ULPI, Serial OTG)

User Manual

MPC8349E Modular Development System