MPC8349E Modular Development System

The MPC8349E Modular Development System (MDS) is designedto aid hardware and software developers using thePowerQUICC II Pro MPC8349E family. The MPC8349E MDS iscomprised of three discrete hardware modules: TheMPC8349E Processor Board, the PowerQUICC Platform I/OBoard and the PowerQUICC PMC to PCI module. The system alsoallows for optional USB and PCI Expansion module interfaces.

Features

The MPC8349 Processor board can be used as a stand alone development board that supports the following features:

•  MPC8349E processor @533MHz
•  MByte DDR-1 333MHz(supports optional ECC memory)
•  64-Bit PCI Edge Connector (3.3V & 5V)
•  Two RJ-45 G-Ethernet ports
•  USB 2.0 High Speed Device/Host/OTG port
•  Dual RS232 ports
•  Local Bus Interface with
  •  8Mbyte Flash (expandable)
  •  Board Control and Status Registers (BCSR) in FBGA
•  Riser Connectors to Platform I/O Board
•  JTAG Debug Port
•  I2C port with
  •  256Kb EEPROM
  •  Real-Time Clock (RTC)
  •  SODIMM SPD EEPROM
•  PCI add-in standard card form factor (321x106mm2)

The MPC8349E MDS Platform I/O Board is an AdvancedTCA form factor with 4 PMC slots. The Platform I/O board, along with the expansion modules, increase development capabilities. For example:

•  PCI Host mode (3.3V 32&64 bit bus) with single agent (w/ PCI PMC card & PIB)
•  Access to 2nd USB Port (w/ USB PMC card & PIB)
•  Additional USB PHYS (UTMI, ULPI & Serial OTG)
•  PCI Host mode (3.3V 32&64 bit bus) with multiple agents (w/PCI expansion card & PIB)

MPC8349E-MDS kit includes:

 MPC8349E-MDS-PB - Processor board for the MPC8349E Family

•  AC/DC 5V/5A universal power supply kit
•  RS232 9-pin standard serial cable
•  Freescale adaptor cable (with RJ45 and RS232 connectors)
•  Mini USB adaptor
•  USB cable (with standardA and miniB connectors)
•  Ethernet cable (RJ45-8 pin connector) (qty 2)
•  Plastic spacer sets Qty 4
•  PCI Panel for MPC8349E-MDS-PB Board
•  SW CodeWarrior kit (includes JTAG connectivity unit)
•  HW Getting Started Guide
•  CD: User Information
•  Board Errata doc. for the MPC8349E-MDS-PB Board
  

 PQ-MDS-PIB - Platform I/O Board for the 83xx Family

•  AdvancedTCA form factor with 4 PMC slots
•  Allows user to expand the functionality of the MPC8349E-MDS-PB when used in conjunction with the module cards.
•  PQ- MDS- PIB Board Kit
  •  Power cable extension with on-off switch
  •  25 Pin IEEE 1284 Parallel cable
  •  Serial cable 10cm D25M to IDC10
  •  Parallel cable 10cm D25M to IDC26F
  •  RJ45 to IDC8F Cable (qty 2)
  •  LC Loop back 62.5/125Fiber (qty 2)
  •  USB Cable StndA Plug to MiniB 1Meter
  •  USB Cable MiniA Plug to StndB 1.5Meter 1
  •  PMC Board assembly spacers (qty 16)
  •  AC/DC Power Supply 48V/2.7A
  •  PQ- MDS- PIB Getting started guide
  •  PQ- MDS- PIB Board Errata
  •  PQ- MDS- PIB Documentation CD
    

 PQ-MDS-PMCPCI - PMC to PCI module card adaptor for the 83xx Family

•  Ability to plug in one PCI card
•  Supports 3.3V 32 & 64 bit PCI Bus.
  

 PQ-MDS-USB - USB expansion module for the 83xx Family (Available Seperately)

•  Access to 2nd USB port
•  Additional USB phys (UTMI, ULPI, Serial OTG)