M52277EVB

The M52277 Evaluation Board (EVB) is based on the V2 ColdeFire Core with EMAC. This board is shipped with the MCF52277 populated to allow for the evaluation of all of the functionality of this part.

This board was designed as a validation platform with maximum flexibility. Where possible we´ve also designed for power and speed but the primary goal of this system was flexibility

Features

M52277 External Interfaces

• On Board Sharp 240 x 320 color touch screen LCD panel
• 60 pin external LCD connector
• Synchronous Serial Interface (SSI) connected to audio CODEC
• USB Support
  • MCF52277 on-chip OTG transceiver with device, host, and OTG support (Mini-AB receptacle)
• Crystal/Clock
• BDM/JTAG
• Two UARTs
• FlexBus
• Timers
• External Interrupts
• CAN Support
  • External CAN transceiver (DB9 connector)
• University Breakout Connector for serial interfaces (I2C, QSPI, GPIO, etc.)

Memory Subsystems

• 32M x 16 Mobile DDR
• 8M x 16 NOR Flash
• 16Mbit Serial Boot Flash

Power

• Inputs
  • 5 V Input to the voltage regulator circuitry
• Regulated On-board voltages:
  • 3.3 V - I/O Voltage
  • 1.8 V - Mobile DDR and Flash Voltage
  • 1.5 V - MCF52277 Core Voltage