Overview

Embedded Artists´ LPC2468 Developer´s Kit lets you get up-and-running quickly with the LPC2468 OEM Board. The LPC2468 OEM Board is equipped with NXP´s ARM7TDMI-S based LPC2468 microcontroller suitable for multipurpose communication applications.
The board can be used in OEM applications, as well as for education purposes,experiment, and prototype projects. Use the LPC2468 Developer´s Kit to get up-and-running quickly with the board. The OEM Board is also perfect for running uClinux with its large on-board RAM and Flash, network and graphics capabilities.

Specification

• Processor:
  
  • NXP´s ARM7TDMI LPC2468 microcontroller in BGA package
• Program Flash:
  
  • 128 MB NAND FLASH, 4 MB NOR FLASH + 512 kB internal
• Data Memory
  • 32 MB SDRAM + 96 KB internal
  • 16-bit data bus to SDRAM
• Ethernet
  
  • 100/10M Ethernet interface based on Micrel KSZ8001L Ethernet PHY
• Clock Crystals
  
  • 12.000 MHz crystal for CPU, 32.768 kHz crystal for RTC
• Dimensions
  • 66 x 80 mm
• Power
  
  • +3.3V powering
• Connectors
  
  • Two 100 pos Hirose expansion connector (FX8C-100), 0.6mm pitch
• Other
  
  • SP1301 chip of USB-OTG
  • 256 Kbit I2C E2PROM for storing non-volatile parameters
  • Buffered 16-bit databus

OEM Base Board Basic Features

• Connectors
  
  • Two 100 pos, 0.6mm pitch Hirose FX8C-100 connectors for OEM Board
  • Ethernet connector (RJ45)
  • MMC/SD interface & connector
  • JTAG connector
  • Pads for ETM connector
• Interfaces
  
  • USB OTG interface & connector
  • USB device interface & connector
  • USB host interface & connector
  • Full modem RS232 on UART #1
  • CAN interface & connector
• Power
  
  • Power supply, either via USB or external 9-15V DC
  • 0.3F capacitor backup for RTC
• Expansion
  
  • Color QVGA LCD expansion connector (serial and parallel interface options)
• Other
  
  • 5 push-button keys (4 via I2C)
  • 5 LEDs (via I2C)
  • 2 Analog inputs
  • USB-to-serial bridge on UART #0, and ISP functionality
  • Reset push-button and LED
  • Speaker output on v1.5 of OEM Base Board
  • All OEM Board signals available on expansion connector/pads
  • 240x150 mm in size

Software

• Several sample applications
• uClinux distribution using the 2.6.21 version of the Linux kernel and u-boot v1.1.6 as the
  bootloader
• SDRAM initialization code
• Pre-emptive Real-time Operating System (RTOS) - devlivered as binary package
• QuickStart Build Environment based on GCC