The DEMO9S08SH8/SG8 is a demonstration board for the MC9S08SH and MC9S08SG microcontrollers. Application development is quick and easy with the integrated USB-BDM, sample software tool, and examples.  An optional BDM_PORT port is also provided to allow use of a BDM_PORT cable. Two, 40-pin connectors provide access to all I/O signal on the target MCU.

Features

• S08SH8, 20PDIP
  • 8K Bytes Flash
  • 512 Bytes RAM
  • Internal Oscillator
• Integrated P&E USB-BDM
• BDM_PORT header for BDM cable support (not installed)
• MCU_PORT socket header for access to MCU IO signals
• On-board +5V regulator
• Optional power from USB-BDM or MCU_PORT connector
• User Components Provided
  • 3 Push Switches; 2 User, 1 Reset
  • 7 LED Indicators; 2 User, VDD, USB Power, USB Power Out
  • 5K ohm POTs w /LP Filter
  • Light Sensor w/ LP Filter and Op Amp
• Connectors
  • 40-pin MCU I/O Connector
  • 2.0mm Barrel Connector
  • BDM_PORT (not installed)
  • USB Connector
  • DB9 Connector

Kit Contains

• DEMO9S08SG8 Board AXM-0398-SG8
• DEMO9S08SH8/SG8 User Manual
• USB Cable
• Support CD for AXIOM HC(S)08 Series
• Resource CD
• Quick Start Guide
• CodeWarriorTM for HCS08
• Warranty Card
• Packing List

User Manual

DEMO9S08SG8: Demonstration board for the MC9S08SG8/4