The DEMO9S08SH8 is a demonstration board for the for the S08SH8 and the S08SG Freescale microcontrollers.

Application development is quick and easy with the integrated USB-BDM interface, together with CodeWarrior™ Development Studio and software examples.

An optional BDM_PORT port is also provided to allow use of a BDM_PORT cable. Two, 40-pin connectors provide access to all IO signals on the target MCU.

Features

• MC9S08SH8, 20 PDIP
  • 8K Bytes Flash
  • 512 Bytes RAM
  • Internal Oscillator
• Integrated P&E USB-BDM
• BDM_PORT header for BDM cable support (not installed)
• MCU_PORT socket header for access to MCU IO signals
• On-board +5V regulator
• Optional power from USB-BDM or MCU_PORT connector
• Power Input Selection Jumpers
  • Power input from USB-BDM
  • Power input from on-board regulator
  • Power input from Connector J1
  • Optional Power output through Connector J1
• User Components Provided
  • 3 Push Switches; 2 User, 1 Reset
  • 7 LED Indicators; 2 User, VDD, USB Power, USB Power Out
  • 5K ohm POTs w /LP Filter
  • Light Sensor w/ LP Filter and Op Amp
• Jumpers
  • PWR_SEL
  • VX_EN
  • USER_EN
  • COM_EN
• Connectors
  • 40-pin MCU I/O Connector
  • 2.0mm Barrel Connector
  • BDM_PORT (not installed)
  • USB Connector
  • DB9 Connector

User Manual

DEMO9S08SH8: Demonstration Board