The AT90USBKey is a low-cost demonstration board based on the AT90USB1287 microcontroller. It allows the quick evaluation of AVR microcontrollers and the AT90USB family. The key simply connects to the USB port of a personal computer to retrieve on-board documentation and run AVR programs. Designers can either run demonstration programs or their own application.
AT90USBKey also allows hardware developments by giving access to the JTAG port and all the IOs of the microcontroller. An external power supply can be used for USB host or stand-alone operation. To increase its demonstrative capabilities, this stand alone board has numerous onboard resources: USB, joystick, data-flash and temperature sensor.
Features
AT90USB QFN64
AVR Studio software interface
USB software interface for Device Firmware Upgrade (DFU bootloader)
Power supply flagged by "VCC-ON" LED:
regulated 3.3V
from an external battery connector (for reduced host or OTG operation)
from the USB interface (USB device bus powered application)
JTAG interface (connector not mounted):
for on-chip ISP
for on-chip debugging using JTAG ICE
Serial interfaces:
1 USB full/low speed device/host/OTG interface
On-board resources:
4+1-ways joystick
2 Bi-Color LEDs
temperature sensor
serial dataflash memories
all microcontroller I/O ports access on 2x8pin headers (not mounted)
On-board RESET button
On-board HWB button to force bootloader section execution at reset.
