RealView Multi-ICE® v2.2

ARM® RealView® Multi-ICE® v2.2 - ARM's popular JTAG-based debug system, RealView Multi-ICE provides industry standard support for ARM core-based devices which contain the Embedded-ICE® logic. The Multi-ICE run control unit allows the core to be started and stopped under control of the connected debugger software. The user can then examine and modify registers and memory, and set breakpoints and watchpoints. Multi-ICE also provides support for code download, trace and RealMonitor™ for real-time debug.

Multi-ICE strengthens the features and usability of the ARM tool chain with:

• Download:130KB/s with 10MHz JTAG Clock
  
• Stepping speeds greater than 50/second
  
• Supports wide range of ARM cores.
  
• Debug of very low voltage cores (down to 1V)
  
• Debug of slow (sleep mode) or variable frequency designs
  
• Code download to Flash memory
  
• Host console I/O services (such as printf) without stopping the processor
  
• Attach to an already running target without halting
  
• Support for the Microsoft Platform Builder

Further Details:

1. Powered from target or external power supply for hot plugging and use with battery powered targets
2. User-controlled input/output bits
3. Supports RDI compliant debuggers (RVD, AXD, Others
4. Stop and start synchronization between microprocessors in multi-core ASICs
5. Auto-detection and manual configuration capability for devices within an ASIC
6. Programmable JTAG bit transfer rates