The Keil MCB900 Evaluation Board is a versatile, flexible prototype board for the NXP P89LPC93x microcontroller family. MCB900 connects to the a COM port of your PC via the serial COM interface. It includes the Keil µVision LPC Development Studio which allows you to create and debug programs that you can program into the on-chip Flash ROM using FlashMagic. The Keil MCB900 Evaluation Board includes several NXP P89LPC93x devices which provide a superset of the available LPC900 parts. Since the MCB900 includes LPC900 family superset devices, you can easily use the MCB900 to create application programs for any LPC900 device.
Components Included
The MCB900 Evaluation Board includes the following components.
MCB900 Evaluation Board
µVision LPC Development Studio
Features and Technical Data
RS232 driver provides a standard COM port interface
8 buffered LEDs display I/O port 2 status information
3,3V low-drop regulator allows wide power supply range (5V ... 9V=)
jumpers for flexible ISP and debug configurations
all P89LPC932 pins connected to wrap area: 55mm x 45mm (2,1" x 1,8")
small board size: 59mm x 110mm (2,3" x 4,3")
Operating Modes
The MCB900 Board can be configure for the following operating modes using the jumpers:
FlashMagic: programming the on-chip Flash ROM of the P89LCP932. Note that the P89LPC932 on the MCB900 board uses a special ISP Flash Loader.
µVision2/ISD51: In-System Debugging with the Keil ISD51.
User Run: execute the application stored in the on-chip Flash ROM of the P89LPC932.
