All relevant functions, interfaces and signals of the MPC5200B TQM5200 are available in the STK52xx Starterkit. The TQM5200S can be connected via the two board-to-board connectors (a total of 240 pins) on the Starterkit.

A keyboard and mouse controller is used as an input unit that communicates via the PSC 6 serial interface with the TQM5200 module.

Two separate PS/2 sockets are provided for contact. A 10/100 Mbit Ethernet interface provides the connection to the network. In the Starterkit, the internal PCI interface of the MPC5200 is accessible through a standard PCI slot.

TQ has integrated two CAN interfaces for industrial applications. The signals are isolated by optocouplers that simultaneously take over the level shifter function. The USB host interface directly supplies +5V from the USB bus supply voltage. An IDE or ATA interface is provided by the STK52xx. As needed, the user can connect compact flash cards or hard disks to this interface.

Features

STK5200S (Eval Kit) with TQM5200S Minimodule - MPC5200B / 400MHz, 32 MB Flash, 64 MB SDRAM, 4kB EEPROM
- 1 x 10/100BaseT Ethernet
- 1 x USB
- 2 x CAN
- 1 x IDE
- PS/2 Mouse & Keyboard
- 2 x RS232
- 1 x PCI
- JTAG/BDM
- Reset-Button
- Power Supply
- Tools CD
- Z-Modem Cable
- MOZI (Minimodul Extractor)

User Manual

MPC5200S Starterkit