Si1024 868 MHz Software Development Kit » Si1024-868-A-SDK
Customers designing with the Si102x/3x should start with either the Si1024-868-A-SDK (this page) or Si1020-915-A-SDK, based on 915 MHz or 868 MHz desired RF frequency.
The Si1024 Software Development Kit includes:
- (2) UDP F960 MCU card with multiplexed LCD
- (2) UDP Si102x daughter card with chip and recommended BOM (Si102x RF 868 +13 dBm Direct Tie Pico Card)
- (2) RF antenna
- (2) Lithium battery (Tadiran TL-2150/S)
- USB debug adapter
- (2) Power supply
- USB cables
- UDP Development Kit Quick Start Guide
- Development Kit CD
- Third Party Tools CD
Additional Resources
- Unified Development Platform Motherboard User´s Guide
- Unified Development Platform UPPI Card User´s Guide
- UDP C8051F960/Si1020 MCU Card with Multiplexed LCD User´s Guide
- UDP C8051F960/Si1020 MCU Card with EMIF User´s Guide
These development kits provide support for Silicon Labs’:
- Integrated Development Environment (IDE)
- Keil 8051 Development Tools
- Configuration Wizard 2
- Keil uVision Drivers
The boards also include several code examples to exercise different hardware features of the Si102x/3x family (e.g., AES block, dc-dc converter, LCD driver, etc.). The examples are portable code modules which may be easily used as a starting point for customer code.
LCD boards are recommended for debug purposes during development even if the final design does not require integrated LCD. The UPPI-series evaluation cards are the engine of an MCU-based system – they contain an MCU, optional radio and minimal support circuitry.