The MityARM-1810F is a highly configurable, very small form-factor processor card that features a Texas Instruments AM1810 375 MHz ARM Applications Processor featuring PROFIBUS tightly integrated with the Xilinx Spartan-6 XC6SLX16 Field Programmable Gate Array (FPGA), FLASH (NAND, and NOR) and mDDR2 RAM memory subsystems. The design of the MityARM-1810F allows end users the capability to develop programs/logic images for both the ARM processor and the FGPA. The MityARM-1810F provides a complete and flexible digital processing infrastructure necessary for the most demanding embedded applications development.

The AM1810 includes an ARM926EJ-S micro-processor unit (MPU) capable of running the rich software applications programmer interfaces (APIs) expected by modern system designers. The ARM architecture supports several operating systems, including Linux, QNX and Windows XP embedded. SO-DIMM-200 (DDR2 Connector)

The primary interface to the MityARM-1810F is through a standard SO-DIMM-200 card edge interface. The interface provides power, synchronous serial connectivity, and up to 96 pins of configurable FPGA I/O for application defined interfacing. Details of the SO-DIMM-200 connector interface are included in the SODIMM-200 Interface Description in the datasheet.

Specifications

• AM1810 SoC from Texas Instruments
  • 375MHz ARM926EJ-S ARM9 CPU Core
  • PROFIBUS Support
    

• Operating Systems Supported
  • Embedded Linux
  • QNX
  • Qt Graphics Framework

• Fully user-programmable FPGA
  • Xilinx Spartan 6
    
  • XC6SLX16 (optional XC6SLX9 or XC6SLX45)

• On-board Memory
  • 128MB SDRAM
  • 8 MB NOR Flash
  • 256 MB NAND Flash

• Compact size: 2.7" x 2.0"
• 200 position SO-DIMM interface
• Separate JTAG interfaces available for ARM and FPGA
• Operating Temperature: 0C to +70C

Features

• Communications Interfaces
  • PROFIBUS
  • 10/100 EMAC
  • USB, USB OTG, 
  • 3 UARTs
  • 2 I2C, 2 SPI

• Digital Interfaces
  • GPIO
  • VPIF
  • eHRPWM
  • eCAP
  • uHPI

• Display Interfaces
  
  • LCD
    
  • DVI

• Mass Storage
  • SATA
  • 2 MMC/SD
    
  • USB Thumb Drive

• Misc. Interfaces
  • McASP
  • 2 McBSP
  • Timers

• 96 user customizable I/O´s direct to the FPGA
  
• FPGA can be used to add interfaces to the ARM, or to off-load processing from the ARM
  
• Fully compatible with TI and Xilinx development tools
• FPGA image stored in flash, loadable by the ARM
  

Benefits

• Certified, royalty free PROFIBUS solution
• Reduce time to market by 6 months
• Production ready CPU module
  
• Fully customized prototype system in 4 to 6 weeks
• Reduce technical risk with proven technology
• Scalable solution: interchangeable with the MityDSP-L138F, MityARM-1808,MityARM-1808F,  MityDSP-L138 modules, and MityARM-1810
  

Brief

MityARM-1810F