Language: English | Deutsch | 中国的       Change Country  
 

PIC32 Ethernet Starter Kit » DM320004

Order Number Distributor Stock    
DM320004 Digi-Key Corporation 199 BUY NOW QUOTE
Future Electronics 2 BUY NOW QUOTE
 
The PIC32 Ethernet Starter Kit provides the easiest and lowest cost method to experience 10/100 ethernet development with PIC32. Combined with Microchip´s free TCP/IP software, your project will be running in no time. The PIC32 has an available CAN2.0b peripheral and USB host/device/OTG.

Key features:

  • PIC32MX795F512L 32-bit microcontroller.
  • PIC32MX440F512H USB microcontroller for on-board debugging.
  • Green power indicator LED.
  • On-board crystal for precision microcontroller clocking (8 MHz).
  • USB connectivity for on-board debugger communications.
  • Orange debug indicator LED.
  • Three push button switches for user-defined inputs.
  • Three user-defined indicator LEDs.
  • USB Type A receptacle connectivity for PIC32 host-based applications.
  • HOST mode power jumper.
  • RJ-45 Ethernet port.
  • Ethernet 10/100 bus speed indicator LED.
  • 50 MHz Ethernet PHY oscillator.
  • 32 kHz oscillator (optional).
  • USB Host and OTG power supply for powering PIC32 USB applications.
  • Regulated +3.3V power supply for powering the starter kit via USB or expansion
  • board.
  • Connector for various expansion boards.
  • USB Type Micro-AB receptacle for OTG and USB device connectivity for PIC32
  • OTG/device-based applications.
  • External Ethernet PHY.

All you need to Develop, Program and Run Code

Write Code
Free MPLAB IDE v8.43 or newer
Free MPLAB C Compiler for PIC32 with no code size limit
Example project files for Ethernet and USB applications
 
Program Memory
Integrated programmer - all you need is the included USB Cable
Program and verify a full 512k image in under 9 seconds

Debug
Integrated debugger - all you need is the included USB cable
Full C source based debugging in MPLAB IDE

Execute and Customize
PIC32 running at 80 MHz with 512K Flash, 128K RAM, 8 ch. DMA + 8 ch. DMA dedicated to Ethernet, CAN and USB
USB powered board
USB and Ethernet connectors, user switches, and LEDs
Expansion connector enables addition of Microchip´s PIC32 expansion boards or create your own
Majority of MCU signals are present on the connector [Hirose: FX10A-120P/12-SV1(71)]

Silicon

PIC32