The fundamental elements of the microEngineering Labs system: Compiler, Programmer, Experimenter Board, and a PIC MCU. This is everything you need to get started, without the deluxe components of the Super Bundle.

Includes:

• PICBASIC PRO™ Compiler
• LAB-X1 Experimenter/Lab Board, Assembled
• PIC16F887-I/P
• melabs U2 Programmer
• 10-pin ICSP Cable
• AC Adapter for LAB-X Board
• USB cable

Note:  AC power adapters are included for customers in the US and Canada only.  Users in other locations must obtain the AC adapters locally to insure compatibility with their local power distribution network.

LAB-X1 Board

The LAB-X1 includes in-circuit programming connectors so the resident PICmicro MCU may be reprogrammed on the fly (requires flash device) using programmers that support this feature. Because the LAB-X1 itself is not a programmer, a separate PIC MUC programmer, such as the melabs U2 Programmer is required to program the MCU.

All of the PICmicro MCU I/O pins are brought out to headers next to a 40-pin ZIF socket. This allows connection to off-board circuits as well as allowing on-board circuits to be connected to other pins, if desired. The LAB-X1 is designed to work with 40-pin PICmicro MCUs, but may be jumpered to work with smaller devices. It is recommended the LAB-X1 be used with the 40-pin PIC16F877A (available separately). This flash device has 8K of code space, 33 I/O pins, 8 ADC channels and may be reprogrammed again and again

Features:

• Inputs: 16 switch keypad, 3 potentiometers, IR, temperature, real time clock
• Outputs: LED bargraph, 2x20 LCD module, speaker, DTMF, PWM, IR, 2 RC servo connectors
• I/O: RS232 interface, RS485 interface
• Serial EEPROM: I2C, SPI, Microwire
• Misc: Reset button, 5-volt regulator, 40-pin ZIF socket for PICmicro MCU (device optional)
• Jumper selectable oscillator from 4MHz to 20MHz
• In-circuit programming/debug connectors
• Prototyping area for additional circuits
• Available assembled, as a kit or as a bare PCB
• Size is 5.5" x 5.6"

The standard version includes:

• 40-pin ZIF socket for PICmicro MCU (device optional)
• 5-volt regulator
• Jumper selectable oscillator from 4MHz to 20MHz
• Reset button
• 16 switch keypad
• 3 potentiometers
• LED bargraph
• 2 line by 20 character LCD module
• Speaker
• 2 RC servo connectors
• RS232 interface
• Socket for RS485 interface (device not included)
• Socket for I2C serial EEPROM (device not included)
• Socket for SPI serial EEPROM (device not included)
• Socket for Microwire serial EEPROM (device not included)
• Socket for real time clock/serial analog to digital convertor (devices not included)
• Socket for Dallas 1620/1820 temperature ICs (devices not included)
• EPIC in-circuit programming connector
• Wiring for Microchip in-circuit debug connector
• Prototyping area for additional circuits