The DK1032 is a turn-key development kit with an extensive tool base allowing for immediate out-of-the-box development for the USB1032 PIC Industrial Host (includes board, complete cable set, firmware, and docs). The USB1032 is the ideal module for applications requiring more performance than typical micro-controllers have offered but not needing the full blast offered by an SBC. Well-suited for applications confined to small, tight spaces, the 125 DMIPS performance requires only 100mA power, considerably less than an SBC.

The USB1032 is powered by the PIC32 micro-controller whose USB 2.0 On-The-Go (OTG) functionality allows the microcontroller to be used as a Host.Operating as a Host device, design engineers can easily and cost-effectively stack StackableUSB client I/O devices onto the controller making a small, embedded controller ideally suited to harsh environments. Available on-board is a host of control features including 10-bit ADC, RS232, four(4) programmable LEDs, and digital I/O.Developers will appreciate the PIC32’s easy-to-use and solidly-supported software tools as they program and debug.

The 1.85” x 1.74” module is USB 2.0 compliant providing users the advantages of plug-and-play interfacing.The module stacks onto the top or bottom of any StackableUSB client single board computer or microcontroller forming a small, rugged, embeddable system, ideal for harsh environments.The USB1032 can be connected to desktop PCs and laptops via ICSP for development.

Specifications:

Mechanical:
·    1.85” x 1.74”  StackableUSB
·    ¼-Size 104™ Form Factor

Power Requirements:
·    +5v ±5% at 100mA typical

Environmental:
·    -40 to +85°C operating 
·    -40° to +85°C storage
·    5%-95% relative humidity, non-condensing

Processor:
·    MIPS32® M4K™ 32-bit core
·    80MHz, 1.56DMIPS/MHz
·    5-stage pipeline, 32-bit ALU
·    Single-cycle multiply and high-performance divide unit
·    User and kernel modes to enable robust embedded system
·    Prefetch cache module to speed execution from flash
·    512KB Flash, 32KB SRAM

Serial Ports:
·    Two (2) RS232 available from 20-pin header

LEDs/Switches:
·    Four (4) programmable user LEDs
·    One (1) reset header

Peripheral Features:
·    4-channel hardware DMA controller with automatic data size detection
·    USB 2.0 compliant full speed controller
·    USB has a dedicated DMA channel
·    Two (2) I2C modules
·    Two (2) UART modules with:
        RS232, RS485 and LIN 1.2 support
        IrDA® with on-chip hardware encoder and decoder
·    Parallel master and slave port
·    Hardware real-time clock/calendar
·    Five (5) 16-bit timers/counters (two 16-bit pairs combine to create two 32-bit timers)
·    Five (5) capture inputs
·    Five (5) vompare/PWM outputs
·    Five (5) external interrupt pins
·    High-speed I/O pins capable of toggling at up to 80MHz
·    High-current sink/source (18 mA/18 mA) on all I/O pins
·    Configurable open-drain output on digital I/O pins

Analog Features:
·    16-channel 10-bit analog-to-digital converter
·    500 KSPS conversion rate
·    Conversion available during sleep, idle
·    Two (2) analog comparators
·    5.5V tolerant input pins (digital pins only)

Debug Features:
·    2-wire ICSP interface with unobtrusive access and real-time data exchange with application

External Connections:
·    2-pin power terminal
·    StackableUSB
·    20-pin header for COM1 and COM2
·    6-pin ICSP debug port
·    2x40-pin headers for I/O and peripherals

Internal Electrical Interface:
·    StackableUSB
·    USB 1.1 & 2.0 compatible, full-speed

Development Kit:
·    Module with all options insatlled
·    Complete cable set
·    Sample software
·    Documentation

Data Sheet