The DEMO9S08MP16 is a low cost development system supporting MC9S08MP16 Microcontrollers. P&E’s Embedded Multilink circuitry on the DEMO9S08MP16 board allows the on-board processor connected to the DEMO9S08MP16 to be debugged and programmed via USB from a PC. In addition, the demo board can be powered using the USB bus.

Features.

• MC9S08MP16VLF (48LQFP)
• Logic Analyzer
• Virtual Serial Port
• Embedded Multilink circuitry populated on the underside
• SCI signals connected to P&E’s Embedded Multilink through jumpers
• 6VDC power supply input barrel connector
• Power Input Selection Jumpers for selecting the input voltage source:
  • 5V from Embedded Multilink or LDO regulator
  • Power from APMOTOR Port which might be 5V or 3.3V
  • RESET Push Button and LED indicator w/ Enable

Kit contains.

• DEMO9S08MP16 demo board & USB A-to-B cable
• P&E Resources CD
• DEMO9S08MP16 Quick Start DVD
  • CodeWarrior 6.3 for MCUs
  • Product Documentation (Data Sheet, Ref Manual)
  • Training Resources

User Manual

S08MP16 Demonstration board