ADSP-BF537 Key Features:

 - 600 MHz High Performance Blackfin
 - 132KB of on chip full speed SRAM
 - 10-stage RISC MCU/DSP pipeline with mixed 16/32-bit ISA
 - Powerful and flexible cache architecture
 - Full SIMD architecture, including instructions for accelerated video and image processing
 - Embedded IEEE 802.3 Compliant 10/100 Ethernet MAC with buffered oscillator output to a separate PHY
 - Controller Area Network (CAN) 2.0B interface
 - Two-Wire Interface Controller
 - Glueless Video Capture/Display Port
 - 182 Mini-BGA, 208 Sparse MiniBGA
 - Core Voltage 0.8
 - 1.2V
  
For an easy and quick start the package includes:

  -  A Bluetechnix Evaluation Board with power supply
  -  A PEEDI - High Speed JTAG Emulator and Flash Programmer with built-in GNU gdb support
  - Eclipse - an open source IDE (screenshot)
  - GNU Tools (compiler, linker, debugger, etc.)
  - u-boot - Bootloader
  - uClinux – Linux for microcontrollers without MMU
  -  Blackfin Cross Development Guide
  -Linux GNU toolchains for Blackfin
  - Examples • Schematics The Evaluation Board consists of a CPU Module CM-BF537E and a    Base Board Eval-BF5xx:
  - CPU: Analog Devices (R) ADSP-BF537 Backfin
  - Clock: 600 MHz
  - 32 MB SDRAM
  - 4 MB NOR Flash (see note)
  - PPI 16-bit
  - SPI
  - I2C
  - 2x UART
  - CAN
  - SPP
  - Ethernet 10/100 Mbit, incl. Physical chip
  - 31.5x36.5mm, 5 grams
  - RoHS compliant • On-Board core voltage regulator Low voltage reset circuit Single 3.3V supply voltage 2x60 pin 0.6mm pitch connector