Language: English | Deutsch | 中国的       Change Country  
 

MPC8569E Modular Development System (MDS) » MPC8569E-MDS-PB

Order Number Distributor Stock    
MPC8569E-MDS-PB Digi-Key Corporation 0 ORDER QUOTE
Arrow Electronics 0 ORDER QUOTE
Future Electronics 0 ORDER QUOTE
 

The MPC8569E Modular Development System (MDS) is designed for hardware and software developers using the MPC8569E PowerQUICC III processor to accelerate development, testing and improve time to market.

The MPC8569E MDS enables:

  • Silicon bring-up/verification
  • Software/application development and support
  • Performance benchmarking
  • Customer evaluation

The MPC8569E MDS consists of multiple boards that provide a comprehensive development system:

  • MPC8569E processor board
  • Platform I/O board
  • Several expansion modules adding support for:
    • TDM
    • ATM
    • PCI Express® agent

Features:

  • Supports the MPC8569E, running up to 1.33 GHz at 1.1V  core voltage in a 783-pin FBGA 1 mm pitch package
  • DDR3 SODIMM @ up to 800 MHz, 1GB without ECC support
  • PCI Express adapter to provide root complex mode
  • Dual 10/100/1000 Mbps Ethernet ports for QUICC EngineTM  module (UCC1 and UCC2)
  • Additional Dual 10/100/1000 Mbps Ethernet ports for QUICC  Engine module (UCC3 and UCC4) provided by pair of Universal Ethernet Modules  (UEM)
  • Dual RS232 transceiver connected to DUART
  • 2 LYNXx1 modules provide dual Serial RapidIO® interface
    • 4x LYNX connected to PCI Express® adapter  through PCI Express mux to support host or agent modes
    • 4x PCI Express edge connector of  optional PCI_PCIe Adapter can be plugged in a PC to provide end point mode
    • PCI Express adapter slot connector  for root complex mode accepts standard (off-the-shelf) PCI Express up to x4 cards
  • Local Bus I/F:
    • 8-bit 32 MB NOR flash in a socket, address  latch, data and control buffers to support slow devices on the PIB and PMC  boards
    • 8-bit 32 MB NAND flash in a socket
    • CPLD BCSR
  • Debug port access via JTAG/COP  connector
  • Two I2C buses
    • Bus for 256K boot EEPROM, 256 Kb board  related info EEPROM, real-time clock (RTC), SODIMM SPD EEPROM, core voltage  POT, UEM´s configuration and PIB
  • Three operation modes
    • Stand-alone mode
    • PIB combined mode - plugged on the PIB
    • PCI Express end point mode - plugged  into a PC as standard PC card (cost effective) through PCI to PCI Express adapter
  • QUICC Engine technology functions supported
    • All QUICC Engine signals are  available on PMC0 and PMC1 on the PIB
    • 16x TDM port with the PQ-MDS-T1 card on  the PIB (on PMC0)
    • 2x DS3 port with the PQ-MDS-T1 card on  the PIB (on PMC0)
    • 1x UTOPIA/POS Level 2, 8-/16-bits,  multi-PHY multi device with PQ-MDS-QOC3 cards on the PIB (on PMC0 and PMC1)
    • 8x 10/100 Mbps RMII Ethernet ports on  the PIB
    • 4x 1000 Mbps RGMII/RTBI (2x SGMII)  Ethernet ports on the PB
  • RoHS compliant
  • FCC compliant
  • CE compliant
Platform I/O Board Features
  • AdvancedTCA® form factor operates in an AdvancedTCA rackor stand-alone
    • High-speed riser connectors to enableconnections to the system board
    • Four sets of PMC connectors for PCIand QUICC Engine technology functions
  • QUICC Engine signals are split between two sets of PMCconnectors
  • Two sets of PMC connectors can run simultaneoussignals to two ATM modules; each one of the ATM modules has ADTEC connectors
  • One PCI bus—PCI operates as 32-bit PCI (on two PMCslots)
  • One RS422 port
  • Octal 10/100 Ethernet PHYs with RMII interface
  • Two 10/100/1000 Ethernet ports with fiber opticsconnectors
  • I2C for PIB configuration
  • Logic analyzer connectors for all CE signals
  • Dual 48V input power supply
  • AdvancedTCA input connector (ZONE-1)
  • Backplane connectors (ZD Zone-2) for high speed signals
PMC Expansion Modules
  • PQ-MDS-T1—Supports E1/T1, DS3, T3 I/F with an option oftwo POTS analog telephone lines
  • PQ-MDS-QOC3—Supports up to 4x 155 Mbps opticaltransceivers for evaluating the UTOPIA L2 /POS bus
  • PQ-MDS-PCI—Single-slot PMC to PCI agent connector toenable additional PCI-based boards for evaluation
  • PQ-MDS-PCI Express—Expansion module supporting multiplePCI Agents
CodeWarrior® Support

  • Development Tools, Linux® OS 2.6, supporting DUART, local bus, DDR, flash, TSEC, I2C, PCI Express (root complex and end point), Serial RapidIO, security and SPI

Typical Applications for the MPC8569E PowerQUICC III Processor

  • IP and multi-protocol base station backhaul(2G/3G/LTE/WiMAX)
  • Access gateway (IPv4 forwarding/security)
  • Legacy 2G/3G control
  • Microwave backhaul
  • Gigabit SME applications
  • Multi-service routers
  • Industrial networking

Silicon

MPC8569E