The DEMO9S08QE32 is a low-cost development system designed for demonstrating, evaluating, and debugging the Freescale MC9S08QE32 microcontroller.

P&E’s Embedded Multilink circuitry on the DEMO9S08QE32 board allows the processor to be debugged and programmed via USB from the PC. In addition, the demo board can be powered using the USB bus.

Features

Base Board Features:

• 3-axis Accelerometer w/Enable
• 8 User LED’s w/ Enable
• 4 User Push Buttons w/ Enable
• 1 Piezzo Buzzer w/ Enable
• 10K Ohm POT w/ Enable
• RESET Push Button and LED indicator w/ Enable
• RS-232 Serial Port w/ DB9-F Connector
• ON/OFF Power Switch w/ LED indicator
• Power Options:
  • USB Cable: 5VDC, 500mA max
  • DC Power Jack: 2.5/5.5mm barrel connector, 5VDC to 12VDC Center Positive
  • Two AAA Battery Cells (regulated VDD Output at 3.0V or 2.1V)
• P&E’s Embedded Multilink circuitry populated on the bottom
  • SCI signals connected to P&E’s Embedded Multilink through jumpers
  • Two channels logic analyzer allows observation of MCU signals

DC9S08QE32 Daughter Card Features

• Four bottom-mounted asymmetrically positioned 8x2 female connectors to mate with the DEMOQE Base Board
• A top-mounted MC9S08QE32 QFN48 chip

Kit contains

• DEMOQE Base Board with a DC9S08QE32 Daughter Card installed
• DEMO9S08QE32 Resource CD
• 2-cell AAA battery package
• USB Cable
• Freescale Warranty Card

User Manual

QE32 Demonstration board