Included hardware

LPC2129 Olimax Development board

• MCU: LPC2129 16/32 bit ARM7TDMI-S with 256K Bytes Program Flash, 16K Bytes RAM, RTC, 4x10 bit ADC 2.44 uS, 2xCAN, 2xUARTs, I2C, SPI, 2x32bit TIMERS, 7xCCR, 6xPWM, WDT, 5V tolerant I/O, up to 60MHz operation
• Standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG
• Three on board voltage regulators 1.8V, 3.3V and 5V with up to 800mA current
• Single power supply: +7-9VDC required
• Power supply status LED
• Power supply filtering capacitor
• Two channel RS232 interface with two RS232 SUB-D 9 pin connectors
• Two channel CAN interface with drivers and two SUB-D 9 pin connectors
• iButton interface circuit
• Frequency input connector
• Two buttons
• Two status LEDs
• Potentiometer connected to AIN
• RESET circuit with external control of the NXP ISP utility via RS232
• RESET button
• DBG jumper for JTAG enable
• BSL jumper for bootloader enable
• JRST jumper for enable/disable external RESET control by RS232
• 10 Mhz crystal
• Extension headers for all uC ports
• PCB: FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print
• Dimensions: 115x80 mm (4.5x3.2")
• Schematics included
• RoHS compliant

Included Software 

IAR Embedded Workbench® for ARM

IAR Embedded Workbench is an Integrated Development Environment with a complete and easy-to-use set of C/C++ cross compiler and debugger tools for professional embedded applications.

• KickStart 32KB IAR C/C++ Compiler for ARM
• Project manager
• Editor
• Linker and librarian tools
• C-SPY® debugger
• Full integration with IAR J-Link