Language: English | Deutsch | 中国的       Change Country
Infineon Technologies

XC87x Series » SAF-XC878CM-16FFI 3V3

Order Number Distributor Stock    
SAF-XC878CM-16FFI 3V3 Available Directly From Manufacturer QUOTE
Summary of Features:

The XC878 has the following features:
• High-performance XC800 Core
– compatible with standard 8051 processor
– two clocks per machine cycle architecture (for memory access without wait state)
– two data pointers
• On-chip memory
– 8 Kbytes of Boot ROM
– 256 bytes of RAM
– 3 Kbytes of XRAM
– 64/52 Kbytes of Flash; (includes memory protection strategy)
• I/O port supply at 3.3 V or 5.0 V and core logic supply at 2.5 V (generated by embedded voltage regulator)
Power-on reset generation
• Brownout detection for core logic supply
• On-chip OSC and PLL for clock generation
– Loss-of-Clock detection
• Power saving modes
– slow-down mode
– idle mode
– power-down mode with wake-up capability via RXD or EXINT0
– clock gating control to each peripheral
• Programmable 16-bit Watchdog Timer (WDT)
• Five ports
– Up to 40 pins as digital I/O
– 8 dedicated analog inputs used as A/D converter input
• 8-channel, 10-bit ADC
• Four 16-bit timers
– Timer 0 and Timer 1 (T0 and T1)
– Timer 2 and Timer 21 (T2 and T21)
• Multiplication/Division Unit for arithmetic operations (MDU)
• CORDIC Coprocessor for computation of trigonometric, hyperbolic and linear functions
• MultiCAN with 2 nodes, 32 message objects
• Two Capture/compare units
– Capture/compare unit 6 for PWM signal generation (CCU6)
– Timer 2 Capture/compare unit for vaious digital signal generation (T2CCU)
• Two full-duplex serial interfaces (UART and UART1)
• Synchronous serial channel (SSC)
• On-chip debug support
– 1 Kbyte of monitor ROM (part of the 8-Kbyte Boot ROM)
– 64 bytes of monitor RAM

Data Sheet


Development Kits etc.

Provider Tool name Order Number
Infineon Technologies Starter Kit XC866 B158-H8548-X-0-7600

General Accessories

Provider Tool name Order Number
Infineon Technologies DAVE version 2 DAVE2