Language: English | Deutsch | 中国的       Change Country
Silicon Labs

Analog-Intensive MCUs » C8051F353-

B
U
Y
Order Number Distributor Stock    
C8051F353-GM Mouser Electronics 202 BUY NOW QUOTE
Avnet Electronics Marketing 0 ORDER QUOTE
C8051F353-GMR Avnet Electronics Marketing 0 ORDER QUOTE
 
Analog Peripherals
24 or 16-Bit ADC
  • No missing codes
  • 0.0015% nonlinearity
  • Programmable conversion rates up to 1 ksps
  • 8-Input multiplexer
  • 1x to 128x PGA
  • Built-in temperature sensor
Two 8-Bit Current Output DACs
Comparator
  • Programmable hysteresis and response time
  • Configurable as interrupt or reset source
  • Low current (0.4 μA)
On-chip Debug
  • On-chip debug circuitry facilitates full speed, non-intrusive in-system debug (No emulator required)
  • Provides breakpoints, single stepping,
  • inspect/modify memory and registers
  • Superior performance to emulation systems using ICE-Chips, target pods, and sockets
  • Low Cost, Complete Development Kit
Supply Voltage 2.7 to 3.6 V
  • Typical operating current:5.8 mA @ 25 MHz;
  • 11 μA @ 32 kHz
  • Typical stop mode current:0.1 μA
Temperature Range: –40 to +85 °C

High Speed 8051 μC Core
  • Pipelined Instruction architecture; executes 70% of instructions in 1 or 2 system clocks
  • Up to 50 MIPS throughput
  • Expanded interrupt handler
Memory
  • 768 Bytes (256 + 512) On-Chip RAM
  • 8 kB Flash; In-system programmable in 512-byte Sectors
Digital Peripherals
  • 17 Port I/O; All 5 V tolerant with high sink current
  • Enhanced UART, SMBus™, and SPI™ Serial Ports
  • Four general purpose 16-bit counter/timers
  • 16-bit programmable counter array (PCA) with three capture/compare modules
  • Real time clock mode using PCA or timer and external clock source
Clock Sources
  • Internal Oscillator: 24.5 MHz with ± 2% accuracy supports UART operation
  • External Oscillator: Crystal, RC, C, or clock
  • (1 or 2 pin modes)
  • Clock multiplier to achieve 50 MHz internal clock
  • Can switch between clock sources on-the-fly
28-Pin QFN or 32-Pin LQFP Package
  • 5 x 5 mm PCB footprint with 28-QFN

Data Sheet

C8051F350/1/2/3