EmbeddedDeveloper.com
Home » Silicon Laboratories » C8051PRECISION » C8051F012

  C8051F012

SAR ADC
  • 12-Bit (C8051F000/1/2, C8051F005/6/7)
  • 10-bit (C8051F010/1/2, C8051F015/6/7)
  • ±1LSB INL; No Missing Codes
  • Programmable Throughput up to 100ksps
  • Up to 8 External Inputs; Programmable as Single-Ended or Differential
  • Programmable Amplifier Gain: 16, 8, 4, 2, 1, 0.5
  • Data Dependent Windowed Interrupt Generator
  • Built-in Temperature Sensor (± 3°C)
Two 12-bit DACs
Two Analog Comparators
  • Programmable Hysteresis Values
  • Configurable to Generate Interrupts or Reset
Voltage Reference
  • 2.4V; 15 ppm/°C
  • Available on External Pin
Precision VDD Monitor/Brown-out Detector

ON-CHIP JTAG DEBUG & BOUNDARY SCAN

  • On-Chip Debug Circuitry Facilitates Full Speed, Non-
  • Intrusive In-System Debug (No Emulator Required!)
  • Provides Breakpoints, Single Stepping, Watchpoints, Stack
  • Monitor
  • Inspect/Modify Memory and Registers
  • Superior Performance to Emulation Systems Using ICEChips,
  • Target Pods, and Sockets
  • IEEE1149.1 Compliant Boundary Scan
  • Low Cost Development Kit
HIGH SPEED 8051 μC CORE
  • Pipelined Instruction Architecture; Executes 70% of
  • Instruction Set in 1 or 2 System Clocks
  • Up to 25MIPS Throughput with 25MHz Clock
  • 21 Vectored Interrupt Sources
MEMORY
  • 256 Bytes Internal Data RAM (F000/01/02/10/11/12)
  • 2304 Bytes Internal Data RAM (F005/06/07/15/16/17)
  • 32k Bytes FLASH; In-System Programmable in 512 byte
  • Sectors
DIGITAL PERIPHERALS
  • 4 Byte-Wide Port I/O; All are 5V tolerant
  • Hardware SMBusTM (I2CTM Compatible), SPITM, and UART
  • Serial Ports Available Concurrently
  • Programmable 16-bit Counter/Timer Array with Five
  • Capture/Compare Modules
  • Four General Purpose 16-bit Counter/Timers
  • Dedicated Watch-Dog Timer
  • Bi-directional Reset
CLOCK SOURCES
  • Internal Programmable Oscillator: 2-to-16MHz
  • External Oscillator: Crystal, RC,C, or Clock
  • Can Switch Between Clock Sources on-the-fly; Useful in
  • Power Saving Modes
SUPPLY VOLTAGE ........................2.7V to 3.6V
  • Typical Operating Current: 12.5mA @ 25MHz
  • Multiple Power Saving Sleep and Shutdown Modes
64-Pin TQFP, 48-Pin TQFP, 32-Pin LQFP
Temperature Range: –40°C to +85°C




Silicon Labs 0.9 Battery