PHYTEC develops, manufactures and distributes OEMable Single Board Computers and related hardware/software in support of ARM/XScale, Blackfin, CAN, Coldfire, PowerPC, x86, C166/XC166/ST10/XA, and other embedded microcontrollers. In addition to standard products, PHYTEC offers custom production, including dedicated Evalboard support for Atmel, Infineon Technologies and Philips.
PCAN-USB Adapter (optically isolated)
This optically isolated USB-to-CAN converter (optically isolated), includes PCANview monitor software . This adapter makes it possible to connect any laptop computer or PC with a USB connector to a CAN [more]
PCAN-USB Adapter
This non-optically isolated USB-to-CAN converter, includes PCANview monitor software. This adapter makes it possible to connect any laptop computer or PC with a USB connector to a CAN bus. Galvanic isolation [more]
PCAN -Dongle (opto-iso)
The CAN-Dongle represents a simple and cost-effective method of integrating a PC into a CAN network via its parallel interface. Incorporating CAN connectivity into the small form-factor of a Dongle makes this device suitable for use with Laptops and Notepads. [more]
PCAN-Dongle (non-opto)
The PCAN-Dongle represents a simple and cost-effective method of integrating a PC into YTECs a CAN network via its parallel interface. Incorporating CAN connectivity into the small form-factor of a Dongle makes this device suitable for use with Laptops and Notepads. [more]
PCAN-Developer
Sophisticated CAN software system for designing and operating distributed networks. Communication is based on a Windows ring-0 driver (VxD/SYS) and allows for interrupt-driven receipt of CAN messages including time stamp. Includes only unlimited driver licenses as well as PCAN Explorer and PCAN Trace.
The GPIO offers quick and easy demonstration of many features of the microcontroller populating various phyCORE Single Board Computers that mount on the Carrier Board. Multiple GPIO devices enable input and output testing.
The NEW PCAN-Explorer 4 is a general purpose CAN monitor for overseeing the data traffic on a network. The integrated data logger can receive and record all or selected messages from the CAN bus. Additional plug-ins allow graphical representation of CAN information, import of databases and printing of strip charts. Windows Vista compatible.
Flexible CAN software system for designing and operating distributed networks. Communication is based on a Windows ring-0 driver (VxD/SYS) and allows for interrupt-driven receipt of CAN messages including time stamp. Includes only 5 driver licenses.
COMING SOON - phyCORE®-ARM9/LPC3250 Rapid Development Kit
COMING SOON - Available in August 2008 and will include phyCORE-LPC3250 SBC with 64 MB SDRAM and 32 MB Flash on phyCORE-LPC3250 Carrier Board, Bare PCB Expansion Board, PHYTEC Spectrum CD, cables, AC adapter, and printed schematics.
Includes phyCORE®-MPC5554 module and Carrier Board, Bare PCB Expansion Board, P&E Micro systems MPC55xx USB-JTAG Debugging Interface, P&E Micro PKGPPC Nexus Starter Edition software, PHYTEC Tool CD for Freescale MPC5554, AC/DC adapter, serial cable and printed schematics.
phyCORE®-XScale/PXA270 Rapid Development Kit w/ LCD
Includes phyCORE®-PXA270 SBC with 64 MB SDRAM and 32 MB Flash mounted on Carrier Board with Expansion Board, 8.4" Sharp LCD/Touch Panel, Bare PCB Expansion Board, JTAG Adapter, null modem cable, parallel cable, cross-over ethernet cable, power adapter, schematics, pre-installed Linux OS or Windows Embedded CE 6.0 demo image and PHYTEC Spectrum CD including SBC hardware manual, evaluation compiler, software demos and Controller User´s Manual
Includes phyCORE-LPC2294 SBC with 1 MB SRAM and 2 MB Flash mounted on HD200 Carrier Board with RJ-45 Ethernet Adapter, IAR Jlink, BAre PCB Expansion Board, PHYTEC Spectrum CD, IAR EWARM Kickstart CD, AC/DC adapter, serial cable, JTAG adapter cable and printed schematics.Configuration: Basic System [more]
phyCORE®-ARM7/LPC2294 Rapid Development Kit + Keil
Includes phyCORE-LPC2294 SBC with 1 MB SRAM and 2 MB Flash mounted on HD200 Carrier Board with RJ-45 Ethernet Adapter, Keil ULink2, PHYTEC Spectrum CD, Keil DK-ARM Evaluation Software, AC/DC adapter, serial cable, JTAG adapter cable and printed schematics.Configuration: Keil [more]
phyCORE®-ARM11/i.MX31 Single Board Computer
The phyCORE-i.MX31 is an ARM®-11 based SBC module populated with the Freescale® i.MX31: a high performance multimedia applications processor. Graphics acceleration, state-of-the-art power management, Floating Point Unit, and rich peripherals such as Ethernet, USB and integrated LCD controller make this module the ideal candidate for computer-bound applications. Configuration: 128 MB DDR RAM, 32 MB NOR Flash, 64 MB NAND Flash, 512 kB SRAM, 32 kBit EEPROM, Ethernet, RTC, USB [more]
phyCORE®-MPC5554 Single Board Computer Module
The Freescale MPC5554 PowerPC microcontroller embodies the continued development of the successful MPC500 family. Configuration: MPC5554 (132 MHz), 2 MB SRAM, 2 MB Flash, CAN, Ethernet, FPGA [more]
phyCORE®-MCF5485 Single Board Computer Module
Integrated 32-bit SoM features Freescale ColdFire operating at 200 MHz with dual Ethernet, dual CAN, 4 UARTs, 2.0 USB, PCI, SPI, I2C and up to 128 MB DDR-SDRAM & 64 MB Flash. Configuration: MCF5485, 200 MHz, 64 MB DDR SRAM, 32 MB Flash, Ethernet, 2.0 USB [more]
phyCORE®-ARM9/LPC3180 Single Board Computer Module
This 32-bit MCU high-performance, low power LCP3180 ARM926EJ-S device from NXP Semiconductors (founded by Philips) provides a vector floating-point co-processor and integrated USB OTG, as well as the ability to operate in ultra-low-power mode down to 0.9V. Configuration:208 MHz, 32 MB SDRAM,32 MB Nand Flash, 32 KB EEPROM, USB OTG, JTAG interface [more]
phyCORE®-MCF5485 Single Board Computer Module
Integrated 32-bit SoM features Freescale ColdFire operating at 200 MHz with dual Ethernet, dual CAN, 4 UARTs, 2.0 USB, PCI, SPI, I2C and up to 128 MB DDR-SDRAM & 64 MB Flash.
phyCORE®-ARM9/LPC3180 Rapid Development Kit - LINUX
Includes phyCORE®-LPC3180 SBC with 32 MB SDRAM and 32 MB Flash mounted on phyCORE-LPC3180 Carrier Board, PHYTEC Spectrum CD, AC adapter, serial cable, USB cable and printed schematics. Configuration: Basic + LINUX [more]
phyCORE®-ARM9/LPC3180 Rapid Development Kit - IAR
Includes phyCORE®-LPC3180 SBC with 32 MB SDRAM and 32 MB Flash mounted on phyCORE-LPC3180 Carrier Board, PHYTEC Spectrum CD, AC adapter, serial cable, USB cable and printed schematics. Configuration: Basic + IAR [more]
phyCORE®-ARM9/LPC3180 Rapid Development Kit - Keil
Includes phyCORE®-LPC3180 SBC with 32 MB SDRAM and 32 MB Flash mounted on phyCORE-LPC3180 Carrier Board, Bare PCB Expansion Board, Keil Ulink2, Keil RealView MDK-ARM Evaluation Software, PHYTEC Spectrum CD, AC adapter, serial cable, USB cable and printed schematics. Configuration: Basic + KEIL [more]
phyCORE®-i.MX31 Rapid Development Kit - Linux
Includes phyCORE®-i.mx31 SBC with 512 KB SRAM and 64 MB NAND Flash mounted on phyCORE-i.mx31 Carrier Board, phyMAPPER-i.mx31 Mapper board, 3.5" LCD, LCD adapter board, Bare PCB expansion board, serial cable, ethernet crossover cable, AC power adapter, module extraction tool, PHYTEC Spectrum CD and printed schematics. Configuration: Linux [more]
phyCORE®-i.MX31 Rapid Development Kit - Windows Embedded CE
Includes phyCORE®-i.mx31 SBC with 512 KB SRAM and 64 MB NAND Flash mounted on phyCORE-i.mx31 Carrier Board, phyMAPPER-i.mx31 Mapper board, 3.5" LCD, LCD adapter board, Bare PCB expansion board, serial cable, ethernet crossover cable, AC power adapter, module extraction tool, PHYTEC Spectrum CD and printed schematics.Configuration: WinCE [more]
Includes phyCORE®-BF537 SBC with 128 MB SDRAM and 4 MB Flash mounted on Blackfin Carrier Board, Bare PCD Expansion Board, PHYTEC Spectrum CD, ADI CrossView CD with VisualDSP++ IDDE, AC adapter, cables and printed schematics.
Includes phyCORE®-MCF5485 SBC with 64 MB DDR SDRAM and 32 MB Flash mounted on Carrier Board, Bare PCB Expansion Board, PHYTEC Spectrum CD, Freescale CodeWarrior eval. tools, P&E BDM adapter, AC/DC adapter, serial cable and printed schematics. [more]
phyCORE® AT91M55800A Rapid Development Kit
Includes phyCORE-AT91M5500A SBC with 2 MB SRAM and 4 MB Flash mounted on HD200 Carrier Board with RJ-45 Ethernet Adapter, PHYTEC Spectrum CD, AC/DC adapter, serial cable, and printed schematics.
phyCORE®-XScale/PXA255 Basic Rapid Development Kit
The phyCORE Single Board Computer (SBC) module is designed to plug into a PHYTEC Carrier Board that provides I/O connectors such as DB-9, RJ-45, USB, and power jack, as well as any other interface circuitry [more]
phyCORE® AT91M55800A Rapid Development Kit
Includes phyCORE-AT91M5500A SBC with 2 MB SRAM and 4 MB Flash mounted on HD200 Carrier Board with RJ-45 Ethernet Adapter, PHYTEC Spectrum CD, AC/DC adapter, serial cable, and printed schematics.
Based on the NXP Semiconductors (founded by Philips) ARM7TDMI-S Processor Core, this subminiature SBC module offers 4 CAN interfaces, 10/100 MBits Ethernet, etc. running at 60 MHz CPU speed
SBC module based on Atmel 32-bit ARM7 RISC microcontroller with Ethernet, 4 UARTs, 8-ch ADC, 2-ch DAC and JTAG offering up to 16 MB Flash and up to 8 MB SRAM.
