Blackhawk™ is a leading providor of JTAG emulators and development tools and the first to introduce a USB JTAG Emulator for Texas Instruments DSPs. Blackhawk™ is a business unit of EWA/EWA Technologies, Inc. with headquarters in Herndon, Virginia.
Blackhawk is the first to design and build USB JTAG emulators for Texas Instruments DSPs and the first company to provide high-performance XDS560-class JTAG emulators. All Blackhawk JTAG emulators are assembled and tested in the USA. Blackhawk is located in Mount Laurel, New Jersey and provides free technical support and driver updates.
Blackhawk Galvanic Isolation Adapter for 14-pin Target
The Blackhawk Isolation Adapter is a device that connects between your JTAG Emulator and the JTAG connector on your target board. The adapter is designed to minimize and protect connected devices (PC/Emulator/Target) from ground loop voltage, harsh environments and new, untested designs. The Isolation Adapter supports 3.3-5.0v targets and is available with standard TI 14-pin or compact TI 20-pin JTAG connections. [more]
Blackhawk LAN560 JTAG Emulator
The LAN560 JTAG Emulator from Blackhawk, is the first fully integrated Ethernet and USB XDS560-class product for debugging TI DSPs over TCP/IP networks. The Blackhawk LAN560 is built upon the widely-used USB560M (TMDSEMU560U) JTAG emulator first introduced by Blackhawk and sold world-wide. The Blackhawk LAN560 supports all versions of Code Composer Studio from v2.2 to 5.x. [more]
Blackhawk PCI 560 JTAG Emulator
The Blackhawk PCI560 is a third generation XDS560-class emulator and the only half-height and half-length XDS560 JTAG Emulator that supports all of the advanced capabilities of Texas Instruments latest DSPs [more]
Blackhawk USB510 JTAG Emulator
The Blackhawk™ USB510 JTAG Emulator is a top-of-the-line high-performance JTAG Emulator for Texas Instruments TMS320, TMS470 (ARM) and OMAP families. The credit card sized USB510 JTAG Emulator is compact and lightweight and features a high-tech medical-grade JTAG cable built for tough environments. [more]
Blackhawk USB560BP JTAG Emulator
The compact bus-powered Blackhawk USB560BP is the third generation of the widely used XDS560-class emulator first introduced by Blackhawk and the most popular bus-powered USB JTAG Emulator supporting all of the advanced capabilities of Texas Instruments latest DSPs. [more]
Blackhawk USB2000 Controller
The Blackhawk USB2000 Controller is a small and lightweight controller designed for the unique requirements of the Texas Instruments TMS320C2000 DSP developers. [more]
Blackhawk USB100v2 Model D
The Blackhawk™ USB100v2 Model D is a very low-cost controller for basic debugging of Texas Instruments DSPs. Requiring no external power source, the USB100v2 Model D can support most of the basic features of higher priced controllers and requires no additional drivers when installed using CCS v4 or later. As an added bonus, Texas Instruments offers Code Composer Studio v4 FREE for use with the USB100v2 Model D.
The Blackhawk™ USB510L JTAG Emulator is a very affordable and full-featured addition to our product lineup for Texas Instruments TMS320, TMS470 (ARM), DaVinci and OMAP families. [more]
Blackhawk Galvanic Isolation Adapter for 20-pin cTI Target
The Blackhawk Isolation Adapter is a device that connects between your JTAG Emulator and the JTAG connector on your target board. The adapter is designed to minimize and protect connected devices (PC/Emulator/Target) from ground loop voltage, harsh environments and new, untested designs. The Isolation Adapter supports 3.3-5.0v targets and is available with compact TI (cTI) 20-pin JTAG connector. [more]
Blackhawk XDS560v2-BP (bus-powered)
The XDS560v2-BP design is the next-generation of the high-performance XDS560-class technology first made available by Blackhawk with the USB560/LAN560 and XDS560 Trace. The XDS560v2-BP combines many features and capabilities of earlier Blackhawk XDS560-class emulators such as LAN debugging and Trace. Most important and unique is the ability of the Blackhawk XDS560v2-BP to operate without the need for an external power supply. It is powered from the USB port! [more]
Blackhawk USB560M JTAG Emulator
The Blackhawk USB560 (Rev. E) is the third generation of the most widely used USB XDS560-class emulator, first introduced by Blackhawk in 2002. The USB560 supports all of the advanced capabilities of Texas Instruments latest DSPs. [more]
GANG2000 Multi-tap Flash Programmer
The GANG2000 Programmer from Blackhawk is a multi-tap device that can quickly and efficiently program multiple independent target boards that use the Texas Instruments C2000™ 32-bit Microcontrollers from a Windows® PC over a high-speed USB2.0 port.
The standalone GUI interface and intelligent features of the GANG2000 eliminate the time consuming task of individual device programming. Operator station installation, setup and maintenance is quick and easy from a single installation program. Code Composer Studio™ is not required.
