28 Pin Demo Board with PIC16F886
This 28-Pin Demo Board is a small and simple demonstration PCB for Microchip’s 28-pin Dual Inline Package (DIP) PIC® Microcontroller Units (MCU), which comes populated with Microchips PIC16F
44 Pin Demo Board with PIC16F887
This is a small demo board with a PIC16F887 device on board and a small surface mount prototype area. Use it with a PICkit 2 or PICkit 3 to program your code via a 6-pin ICSP header on the board.
Accessory Development Starter Kit for Android
This Starter Kit For Android™ is a standalone board used for evaluating and developing electronic accessories for Googles Android operating system for smartphones and tablets.
dsPICDEM 2 Development Board
The dsPICDEM™ 2 Development Board is a development and evaluation tool that helps create embedded applications using dsPIC30F Digital Signal Controllers.
dsPICDEM MCHV Development Board
The Microchip dsPICDEM™ MCHV Development System is intended to aid the user in the rapid evaluation and development of a wide variety of motor control applications using a dsPIC® Digital Sig
dsPICDEM MCLV-2 Development Board
The dsPICDEMTM MCLV-2 Development Board provides a cost-effective method of evaluating and developing sensored or sensorless Brushless DC (BLDC) and permanent magnet synchronous motor control applicat
dsPICDEM MCSM Development Board Kit with Stepper Motor
The Microchip dsPICDEM MCSM Development Board Kit is targeted to control both unipolar and bipolar stepper motors in open-loop or closed-loop (current control) mode. Software to run motors in open-loo
enhanced mTouch Capacitive Touch Evaluation Kit
The enhanced mTouch Capacitive Touch Evaluation Kit provides a simple platform for developing a variety of capacitive touch sense applications using PIC16F, PIC18F, PIC24F and PIC32 microcontrollers.
Explorer 16 (44-pin)
The Explorer 16 is a low-cost, efficient development board to evaluate the features and performace of Microchips new PIC24 Microcontroller and dsPIC33 Digital Signal Controller (DSC) families.
Explorer 16 Development Board
The Explorer 16 is a low cost, efficient development board to evaluate the features and performance of Microchip´s new PIC24 Microcontroller, the dsPIC33 Digital Signal Controller (DSC) families
F1 Evaluation Kit
The F1 Evaluation Platform is a simple development tool for Enhanced Mid-range PIC microcontrollers (PIC12F1xxx/PIC16F1xxx) and demonstrates the capabilities & low power enhancements of these new
F1 Evaluation Platform
The F1 Evaluation Platform is a demonstration/development tool for Enhanced Mid-range PIC microcontrollers (PIC12F1xxx/PIC16F1xxx). Populated with a PIC16LF1937 featuring XLP technology, this platform
LCD Explorer Development Board
The LCD Explorer provides an ideal platform for a customer to evaluate a MCU with a x8 Common LCD Driver on a 38 segment x 8 common LCD display. PICtail Plus connections allow a customer to evaluate t
Low Pin Count Demo Board with PIC16F690
This is a small demo board with a PIC16F690 on board and a small prototype area. Use it with a PICkit 2 to program your code via the 6-pin ICSP header on the board
Low Pin Count USB Development Kit
The Low Pin Count USB Development Kit provides an easy, low-cost way to evaluate the functionality of Microchips PIC18F14K50 and PIC18F13K50 20-pin USB microcontrollers. The all-inclusive kit contains
Low Pin Count USB Development Kit (with PICkit 3)
The Low Pin Count USB Development Kit provides an easy, low-cost way to evaluate the functionality of Microchips PIC18F14K50 and PIC18F13K50 20-pin USB microcontrollers. This kit contains the hardware
Low Power Solutions Demonstration Board
The Low Power Solutions Demonstration board provides designers a convenient and fun way to explore PICmicro® nanoWatt features within a functional ultrasonic range-finder application. It features
Mechatronics Demonstration Kit
The PICDEM™ Mechatronics demonstration board is an easy-to-use mechatronics development and demonstration platform. Mechatronics refers to implementing intelligent control in a mechanical system
Microstick for dsPIC33F and PIC24H Development Board
The Microstick for dsPIC33F and PIC24H devices is designed to provide designers with an easy to use, economical development environment for 16-bit Digital Signal Controllers and Microcontrollers.
Microstick for the 3V PIC24F K-series
This flexible USB powered development platform is the perfect solution for those looking to get started with Microchip’s lowest cost 16-bit microcontroller families – PIC24F “KL&rdqu
Microstick II delivers a complete low-cost development hardware platform for Microchip’s 16-bit and 32-bit microcontrollers and digital signal controllers.
Motor Control Starter Kit with mTouch Sensing
The motor control Starter Kit with mTouch Sensing is a complete hardware and software tool suite for evaluating Microchips ultra-low cost Motor Control Family dsPIC DSCs. It contains a single board wi
MPLAB ICD 3 Evaluation Kit
This kit includes a MPLAB ICD 3 Debugger, a PICDEM 2 Plus (DM163022), and a 9V universal power supply.
MPLAB ICD 3 Evaluation Kit With Explorer 16
The MPLAB ICD 3 with Explorer 16 Kit is a complete set of tools for applicationdevelopment using Microchip PIC24F, PIC24H, and dsPIC33 16-bit MCUs.
MPLAB Starter Kit for PIC18F MCU
The MPLAB Starter Kit for PIC18F MCU contains everything needed to experience the high performance and versatility of the PIC18F microcontroller family. It includes an on-board debugger/programming ca
MPLAB Starter Kit for PIC24E MCUs
The PIC24E USB Starter Kit provides a low cost method for the development and testing of USB OTG, Host and Device applications on the PIC24E MCU family.
MPLAB Starter Kit for PIC24F
This inexpensive kit includes an integrated in-circuit debugger and programmer, USB device and host connectors, tri color LED, capacitive touch pad and an OLED display.
MPLAB Starter Kit for PIC24H
The MPLAB Starter Kit for PIC24H MCUs is a complete hardware and software kit for exploring the power of PIC24H family of MCUs for multi-tasking needs.
PIC18 Development Kit
The PIC18 Development Kit is a complete bundle of the essential development tools needed to get started with your next PIC18 application. The kit includes a PIC18 Explorer Board, PICkit 3 Debugger/Pro
PIC18 Explorer Board
This low-cost demo board is for evaluation of our PIC18 MCU families. The PIC18 is our highest performance 8-bit architecture and has three different families: standard PIC18, PIC18 J-series and PIC18
PIC18F4xK20 Starter Kit
The PIC18F4XK20 Starter Kit is a demonstration and development platformfor Microchips K20 series microcontrollers.The board provides aplatform to highlight this new familys benchmark for lower power c
PIC24FJ256DA210 Development Board
The PIC24FJ256DA210 Development Board is a low cost and efficient development board to evaluate the features and performance of the PIC24FJ256DA210 with integrated graphics, mTouch™ and USB. Thi
PIC24FJ256DA210 Development Kit
The PIC24FJ256DA210 Development Kit is a low cost and efficient development kit to evaluate the features and performance of the PIC24FJ256DA210 with integrated graphics, mTouch™ and USB.
PIC32 Ethernet Starter Kit
The PIC32 Ethernet Starter Kit provides the easiest and lowest cost method to experience 10/100 ethernet development with PIC32. Combined with Microchip´s free TCP/IP software, your project will
PIC32 Plug-In Module
This PIC32 Plug-In Module enables PIC32 development on the Explorer 16 development board (DM24000x) and supports the MPLAB REAL ICE Trace Kit (AC244006). An 80
PIC32 Starter Kit
The PIC32 Starter Kit provides the easiest and lowest cost method to experience the PIC32 microcontroller for the first time. From the over 35 source code examples to the getting started project, user
PIC32 USB Starter Kit
The PIC32 USB Starter Kit II provides the easiest and lowest cost method to experience the USB and CAN functionality of the PIC32 microcontrollers
PIC32MX1/MX2 Starter Kit
The PIC32 MX1/ MX2 Starter kit (DM320013) is a complete solution for exploring the low-cost, high-performance PIC32MX1/MX2 devices.
PIC32MZ Embedded Connectivity Starter Kit with Crypto Engine
This Connectivity kit provides the easiest and lowest cost method to experience the high performance and advanced peripherals integrated in the PIC32MZ Embedded Connectivity MCUs.
PICDEM 2 Plus
The PICDEM 2 Plus board demonstrates the capabilities of Microchip’s 8-bit microcontrollers, specifically, 18-, 28- and 40-pin PIC16FXXX, PIC16F1XXX, and PIC18 devices. It can be used
PICDEM 2 Plus
The PICDEM 2 Plus is a simple board that demonstrates the capabilities of many of the 18-, 28- and 40-pin PIC16XXXX and PIC18XXXX devices. It can be used stand-alone with a programmed part, with an in
PICDEM 4 Demonstration Board
The PICDEM 4 is a demonstration and evaluation board for the 8-pin, 14-pin, and 18-pin general purpose family of products with power management features.
PICDEM CAN-LIN 2 Demonstration Board
Microchip offers two similar PICDEM CAN-LIN demonstration boards to support different PICmicro® devices. All demonstrate the main features of the devices, especially those features of the integrat
PICDEM CAN-LIN 3 Demonstration Board_duplicate
Microchip offers two similar PICDEM CAN-LIN demonstration boards tosupport different PICmicro® devices. All demonstrate the main featuresof the devices, especially those features of the integrated
PICDEM Full Speed USB
The PICDEM™ FS-USB is a demonstration and evaluation board for the PIC18F4550 family of Flash microcontrollers with full speed USB 2.0 interface. The board contains a PIC18F4550 microcontroll
PICDEM Inductive Touch Development Kit
The PICDEM Inductive Touch Development Kit is an evaluation and development platform for Microchips Inductive Touch Technology. Factory programmed firmware provides immediate access to all the boards
PICDEM Lab Development Kit
The PICDEM Lab Development Board is designed to providea comprehensive development and learning platform for virtually all ofMicrochips Flash-based 6-, 8-, 14-, 18-, and 20-pin, 8-bit PICMicrocontroll
PICDEM LCD 2 Demonstration Board
The PICDEM LCD 2 Demonstration Board (DM163030) shows the main features of Microchip’s 28, 40, 64 and 80-pin LCD Flash PIC microcontrollers including the LCD voltage booster and contrast control
PICDEM MC LV Development Board
The PICDEM MC LV Development Board provides a cost-effective method of evaluating and developing sensored or sensorless brushless DC (BLDC) motor control applications. The board supports Microchip&rsq
PICDEM System Management Kit
The PICDEM™ System Management Kit is a demonstration and training tool for system integration and the design of a variety of applications. PIC® microcontrollers provide powerful integrated p
PICDEM Touch Sense 2
The PICDEM Touch Sense 2 board features the new peripheral on PIC24F parts called Charge Time Measurement Unit (CTMU). The board uses a PIC24F256GB110 device to implement a slider, 20-button matrixed
PICDEM.net 2 Development Board
The PICDEM.net™ 2 Development Board (DM163024) is an Internet/Ethernet development board supporting both the popular ENC28J60 Ethernet Controller and the single-chip Ethernet microcontroller fam
PICkit 1 Flash Starter Kit
The PICkit™ 1 Flash Starter Kit is a low-cost development kit with an easy-to-use interface for programming Microchip’s 8-/14-pin Flash family of microcontrollers.
PICkit 18-Pin Demonstration Board
The DM164120-4 is a PICDEM Lab Development Kit. This 18-Pin Demo Board now with PIC16F1827 includes 4 LEDs, a potentiometer for ADC, a pushbutton, a prototyping area, and a 6-pin connector for
PicKit for rfPIC 315MHz and 433MHz Evaluation
The rfPIC Development Kit 1 provides design engineers with an easy way to evaluate unidirectional remote sense and control wireless links based on the rfPIC12F675 and rfRXD0420/0920 devices. The kit i
PICkit Serial Analyzer
The PICkit Serial Analyzer is a low-cost USB-based tool used to direct communication between a PC and an external serial device. The kit comes complete with hardware (supporting I2C™, SMBu
PICkit™ 2 Starter Kit
The PICkit 2 Starter Kit contains a PICkit 2 Microcontroller Programmer and a PICkit 2 Low Pin Count Demo Board containing a PIC16F690 PDIP for getting started with programming baseli
Plug-In-Module for PIC32MX220F32D
The MA320011 is a Plug-in Module that enables development using a PIC32 with an Explorer 16 development board.
Plug-in-Module Use with Explorer 16
The MA330029 is a part of dsPIC33F GP 28P QFN to 100P Plug-in-Module. The dsPIC33FJ16MC102 and PIC24FJ16MC102 plug-in modules (PIMs).The MA330029 are designed to demonstrate the capabilities o
Sabrewing Single Zone Evaluation Kit
The Sabrewing Single Zone Evaluation kit provides a complete solution for exploring the low-cost, high-performance MGC3130 3D Tracking and Gesture Controller.
SchmartBoard 8 Bit PIC Development Board
Once upon a time, an engineer, student or hobbyist could easily use prototyping boards, wire-wrap and bread boards to prototype and troubleshoot a circuit. The IC’s were in DIP form and solderin
Solar Energy Harvesting Development Kit
The XLP 16-bit Energy Harvesting Development Kit is a true development platform for realizing energy harvesting applications. The development board portion of the kit features the PIC24F16KA102 XLP MC
Wi-Fi Comm Demo Board
This Demo board provides a compact development platform to evaluate Microchip’s Wi-Fi product offering. The demo board comes with onboard MRF24WB0MA Wi-Fi module which is FCC/IC/ETSI certified a
XLP 16-bit Development Board
The XLP 16-bit Development Board is designed with eXtreme Low Power in mind, it enables designs with sleep currents as low as 20nA. The board is suitable for prototyping many low power applications in
XLP 8-BIT Development Board
The XLP 8-bit Development Board provides a low-cost, highly configurable development system for Microchips new line of extreme-low-power 8-bit PIC18 F or PIC16F Enhanced core microcontrollers that all