SEGGER Microcontroller develops and distributes software development tools and ANSI "C" software components (middleware) for embedded systems in several industries, such as telecom, medical technology, consumer electronics, the automotive industry, and industrial automation. SEGGER´s intention is to cut software development time for embedded applications by offering compact, flexible and easy to use middleware allowing developers to concentrate on their applications.
Our most popular solutions consist of emWin, a universal graphic software package for embedded applications, and embOS, a small yet efficient real-time kernel. emWin, written entirely in ANSI "C", can easily be used on any CPU and most any display. It is complemented by the available PC tools: Bitmap Converter, Font Converter, Simulator and Viewer. embOS supports most 8/16/32-bit CPUs. Its small memory footprint makes it suitable for single-chip applications. embOS comes with a viewer that allows looking into the system from a development PC (this viewer includes profiling).
Apart from our main focus on software tools, SEGGER has also developed and produces a programming tool for flash microcontrollers and a USB to JTAG emulator to assist in development, debugging and production. This USB to JTAG emulator, known as j-link, has fastly become the industry standard.
Please contact us concerning any products not found on this web site.
CORPORATE OFFICE In den Weiden 11 40721 Hilden Germany www.segger.com
MASSACHUSETTS OFFICE 106 Front Street Winchendon, MA 01475 United States of America www.segger-us.com
J-Link
ARM/Cortex Emulator, and Renesas RX Emulator. Includes a USB cable, and a 20-pin JTAG/SWD ribbon cable for ARM/Cortex devices. The J-Link RX Adapter (Sold Separately) is required for use with Renesas RX devices. No power supply required (driven and powered through USB). [more]
J-Link 5V Adapter
Adapter for targets operating at 5V. The 5V adapter extends the voltage of J-Link ARM revision 4 to revision 5.3 and, other pin-compatible JTAG probes, to 5V. J-Link ARM revision 5.4 and newer are 5V tolerant and do not require this adapter. [more]
J-Trace ARM
USB driven JTAG and Trace (38-pin Mictor) interface for ARM cores. Includes a USB cable, JTAG 20-pin ribbon cable, and Trace 38-pin ribbon cable. No power supply required (powered through USB). IAR Embedded Workbench and Keil RealView MDK have integrated support for this device. [more]
J-Link PRO
J-Link PRO is an enhanced version of the SEGGER J-Link. This emulator supports ARM/Cortex and Renesas RX devices. The J-Link RX Adapter (Sold Separately) is required for use with Renesas RX devices. It has an Ethernet interface in addition to the USB interface. Two additional LEDs have been added so to be used as hardware status indicators. It also includes licenses for our; 8.08.02 J-Flash, 8.08.03 J-Link ARM RDI, 8.08.04 J-Link ARM Flash Breakpoints, and 8.08.08 J-Link GDB Server. [more]
J-Link EDU
The J-Link EDU emulator is our standard 8.08.00 J-Link ARM emulator wrapped in a new educational marked housing. Please note; an educational use terms window is displayed when connecting the J-Link EDU device to your host PC. The J-Link EDU includes support for our Flash Breakpoint and GDB Server enhancement modules. All of this expected and extended emulator functionality is now available to private persons and students who want to educate themselves in programming and debugging an embedded system. [more]
J-Link ULTRA
Based on the highly optimized and proven J-Link, it offers even higher speed. This is due to the faster CPU, built-in FPGA and High Speed USB interface. This ARM/Cortex Emulator, and Renesas RX Emulator includes a USB cable, and a 20-pin JTAG/SWD ribbon cable for ARM/Cortex devices. The J-Link RX Adapter (Sold Separately) is required for use with Renesas RX devices. No power supply required (driven and powered through USB). [more]
J-Trace for Cortex-M3 JTAG emulator
J-Trace for Cortex-M3 is a JTAG emulator designed for Cortex-M3 cores which includes trace (ETM) support. J-Trace for Cortex-M3 can also be used as a J-Link and it also supports ARM7/9 cores. Tracing on ARM7/9 targets is not supported. [more]
embOS (Real Time Operating System)
embOS is a real time operating system for embedded applications designed to offer the benefits of a fully featured multitasking system, even for hard real time applications using minimal resources. [more]
emWin (Graphics Software and GUI)
emWin, one of the most efficient and comprehensive embedded GUIs available, helps developers beat their timelines and cut their development costs. It is written in ANSI "C" and supports any black and white, grayscale, and color display. [more]
embOS/IP (TCP/IP Stack)
embOS/IP has been optimized for use in real-time, memory constrained embedded systems. This TCP/IP stack is RFC compliant and extends a standard socket API to your embedded application. [more]
emFile (Embedded File System)
emFile is an embedded file system which can be used with any type of storage device. emFile is a high performance library that has been optimized for; minimum memory consumption in RAM and ROM, high speed, and versatility. It is written in ANSI-"C" and can be used on any CPU. [more]
emUSB (Embedded USB Stack)
emUSB Host/Device Stack has been designed to work on any embedded system with a USB controller. Ports for most common USB controllers are available. It can be used with USB 1.1 or USB 2.0. [more]
Flasher ARM
JTAG/SWD emulator and stand-alone programming tool for ARM microcontrollers. Flash memory stores the target program for stand-alone use. [more]
Flasher ST7
Programming tool for ST Microelectronics ST7 series of microcontrollers: Supported Device List. This tool allows programming of MCU via synchronous serial interface in circuit only. A target system is required. [more]
Flasher 5
Programming tool for Renesas M16C/20, M16C/62, M16C/80 and 740, 38000, M79, M38, and ST9 series of microcontrollers. This tool allows programming of MCU via synchronous serial interface in circuit only. A target system is required.Flash memory stores the target program.PCprogram allows batch mode processing for use in automated test systems. ASCII command interface used to control Flasher without the use of a PC program. [more]
Flasher STM8
Programming tool for STM8 microcontrollers. Flash memory stores the target program. Integrated optical isolation between host and target system included. USB, Ethernet, RS232 and standard 4-pin SWIM ribbon cable included. Windows PC software included. [more]
J-Flash
Software to program EEPROM and flash chips in ARM systems. You will benefit from six months of free email support from the time that this product is ordered. The J-Flash ARM software is delivered electronically within one business day from the time of purchase to the email address supplied at checkout. [more]
J-Link RDI
RDI interface for the J-Link ARM. You will benefit from six months of free email support from the time that this product is ordered. The J-Link RDI software is delivered electronically within one business day from the time of purchase to the email address supplied at checkout. [more]
J-Link Flash Breakpoint
This adds our exclusive ARM Flash Breakpoints enhancement utility which permits you to set an unlimited number of breakpoints even if your application program is located in Flash memory, thereby utilizing your debugging environment to its fullest. You will benefit from six months of free email support from the time that this product is ordered. The J-Link ARM Flash Breakpoints license is delivered electronically within one business day from the time of purchase to the email address supplied at checkout. Note that the J-Link ARM Flash Breakpoints enhancement utility is keyed to a J-Link hardware unit. You will be asked to enter your J-Link serial number during the order process. Be sure to enter the J-Link serial number and not the batch code that can be found on a number of these devices. If you would like to use Segger´s J-Link ARM Flash Breakpoints enhancement utility with more than one J-Link, a license must be purchased for each device to be used. You may install the J-Link [more]
J-Link GDB Server
The J-Link GDB Server is a remote server for the GNU Project Debugger. You will benefit from six months of free email support from the time that this product is ordered. The J-Link GDB Server software is delivered electronically within one business day from the time of purchase to the email address supplied at checkout. [more]
J-Link Flash Download
J-Link comes with a set of flash loaders which permits the download of your application directly into the flash memory of your target system from your development environment. The J-Link flash loaders are highly optimized for fast flash programming and the feature itself is optimized to make it as simple as possible to use it. Moreover the flash download feature of J-Link can be used free of charge. [more]
JTAG Isolator
The J-Link JTAG Isolator can be connected between the J-Link ARM and any ARM-board that uses the standard 20-pin JTAG-ARM connector to provide electrical isolation. This is essential when the development tools are not connected to the same ground as the application. It is also useful to protect the development tools from electrical spikes that often occur in some applications, such as motor control applications. A 20-pin flat cable (supplied with the J-Link) is needed to connect the target. [more]
J-Link ARM-14
Adapter for ARM targets with 14-pin 0.1" mating JTAG connectors. Includes a 14-pin ribbon cable. [more]
J-Link 9-Pin Cortex-M Adapter
The J-Link 9-Pin Cortex-M Adapter converts the 20-pin, 0.1 inch standard connector to a 9-pin, 0.05 inch Cortex-M connector. Includes a Cortex-M 9-pin cable. [more]
J-Link 19-Pin Cortex-M Adapter
The J-Link 19-Pin Cortex-M Adapter converts the 20-pin, 0.1 inch standard connector to a 19-pin, 0.05 inch Cortex-M connector. Includes a Cortex-M 19-pin cable. [more]
