Atmel Corporation, founded in 1984, is a worldwide leader in the design, manufacturing and marketing of advanced semiconductors, including microcontrollers, advanced logic, nonvolatile memory, mixed signal, sensors and RF integrated circuits. Atmel is one of the elite new companies capable of integrating dense nonvolatile memory, logic and analog functions on a single chip. Atmel chips are manufactured using the most advanced wafer processes, including BiCMOS, CMOS and Silicon Germanium (SiGe) technologies.
AT91CAP9 Starter Kit
The AT91CAP9 Starter Kit is supplied with an essential set of development tools in order to get started immediately. These include:
KickStart version of IAR™ Embedded Workbench® for ARM®
Microsoft® Windows CE ® Board Support Package and demonstration from Adeneo
Instructions for downloading Altera´s free Quartus® 2 Web Edition tools for FPGA programming
The AT91SAM9G45-EKES Evaluation Kit supports the AT91SAM9G45 ARM926EJ-S-based32-bit RISC microcontroller for real-time code development and evaluation. [more]
AT91SAM9G10-EK Evaluation Kit
The AT91SAM9G10-EK evaluation kit is an effective platform for evaluating chip performance and developing code for applications based on the AT91SAM9G10. [more]
AT91EB55 Evaluation Kit
The AT91EB55 Evaluation Kit permits rapid evaluation and application development on the AT91M55800A. [more]
AT91EB42 Evaluation Kit
The AT91EB42 Evaluation Kit supports the AT91M42800A enabling real-time codedevelopment and evaluation. [more]
AT91EB40A Evaluation Kit
The AT91EB40A Evaluation Kit supports the AT91R40008, enabling real-time codedevelopment and evaluation. [more]
AT91SAM7XC-EK Evaluation Board
The AT91SAM7XC-EK evaluation kit enables evaluation capabilities and codedevelopment of applications running on an AT91SAM7XC microcontroller. [more]
AT91SAM7L-STK Starter Kit
The AT91SAM7L-STK Starter Kit enables evaluation capabilities and codedevelopment of applications running on an AT91SAM7L64/128. [more]
SAM3U- EK Development Board
The SAM3U Evaluation Kit (SAM3U-EK) allows the evaluation of the SAM3U series devices. It has enough features to demonstrate most of the product’s capabilities to the users. The SAM3U-EK also features extension connectors to allow the users to add new interfaces in case they are not on-board. [more]
AT91SAM9G20-EK Evaluation Kit
The AT91SAM9G20-EK Evaluation Kit supports the AT91SAM9G20 ARM926EJ-S-based 32-bit RISC microcontroller for real-time code development and evaluation. [more]
AVR® STK600 Starter Kit
The Atmel AVR® STK600 is a complete starter kit and development system for the AVR and AVR32 flash microcontrollers from ATMEL Corporation. It is designed to give designers a quick start to develop code on the AVR, combined with advanced features for using the starter kit to prototype and test new designs. STK600 is shipped with a ATmega2560 device board. [more]
ATAVRRZRAVEN 2.4 GHz Evaluation and Starter Kit
The RZRAVEN 2.4 GHz Evaluation and Starter kit enables development, debugging and demonstration of a wide range of low power wireless applications including IEEE 802.15.4, 6LoWPAN and ZigBee networks. [more]
AT91SAM9XE-EK Evaluation Kit
The AT91SAM9XE-EK Evaluation Kit enables the evaluation of and coder development for applications running on an AT91SAM9XE device. [more]
AT91SAM9RL-EK Evaluation Kit
The AT91SAM9RL-EK Evaluation Kit supports the AT91SAM9RL ARM926EJ-S-based 32-bit RISC microcontroller for real-time code development and evaluation. [more]
ATAVRAUTOEK1 evaluation kit
The ATAVRAUTOEK1 evaluation kit is a very complete ready to use CAN/LIN network with one CAN-LIN gateway (AUTO100) and two LIN slave nodes. One node is used for joystick control (AUTO300) and one node for DC motor control (AUTO200). It provides a CAN/LIN network debugger (AUTO102) connected to PC via USB, allowing to monitor and transmit on both networks using Warwick Technology PC software. It allows customer to quickly start and evaluate Atmel automotive network solutions. [more]
ATEVK1101 Evaluation Kit
The EVK1101 is an evaluation kit and development system for the AVR32 AT32UC3B microcontroller. It is equipped with a rich set of peripherals, memory, and makes it easy to try the full potential of the AVR32 devices. [more]
AVR USB Key Demonstration Kit
The AT90USBKey is a low-cost demonstration board based on the AT90USB1287 microcontroller. It allows the quick evaluation of AVR microcontrollers and the AT90USB family. The key simply connects to the USB port of a personal computer to retrieve on-board documentation and run AVR programs. Designers can either run demonstration programs or their own application. [more]
AT91SAM9263-EK Evaluation Kit
The AT91SAM9263-EK Evaluation Kit enables the evaluation of and code development for applications running on an AT91SAM9263 device. The board is equipped with an AT91SAM9263 (324-ball LFBGA package) [more]
EVK1100 Evaluation Kit
The EVK1100 is an evaluation kit and development system for the AVR32 AT32UC3A microcontroller. It is equipped with a rich set of peripherals, memory, and makes it easy to try the full potential of the AVR32 devices. [more]
ATNGW100 Network Gateway Kit
This Atmel AVR32 kit is based on the AT32AP7000 Application Processor, and is well suited as a low cost alternative to STK1000. The PCB includes and a full port of royalty-free peripheral drivers, protocol stacks, and communications applications. The Network Gateway kit demonstrates the ability of the AVR32 and its embedded Linux kernel to handle high-speed serial communications including bridging between interfaces that run incompatible serial protocols. Examples include routing and filtering of traffic between two TCP/IP networks as well as routing and filtering of data between TCP/IP, USB and SD cards. [more]
STK525 USB Starter Kit
The STK525 Starter Kit is dedicated to the AT90USB microcontrollers. It supports JTAGICE mkII and AVRISP mkII via AVR Studio. It includes a number demonstration program with source and hex files. The parts can be directly programmed through the USB port with FLIP In-System Programming utility. [more]
ATAVRFBKIT Ballast Demo Kit
The ATAVRFBKIT is a Dimmable Fluorescent Ballast kit which demonstrate the ability of the AT90PWM2 to control all the main functions of a DALI Fluorescent Ballast. C code is provided to speed-up development time. [more]
ATSTK503 Expansion Board
The STK503 board is a hardware expansion module for the STK500 Starter Kit. STK503 adds support for 100-pin AVR microcontrollers. STK503 includes connectors and hardware allowing full utilization of the features of these devices, while the Zero Insertion Force (ZIF) socket makes it easy to use TQFP packages for prototyping. [more]
AVR STK502 LCD Expansion Board
The STK502 board is a hardware expansion module for the STK500 Starter Kit adding support for the ATmega169 device featuring an on-chip LCD controller. The STK502 includes connectors, jumpers and hardware allowing full support for all features on the mega169, including a LCD-display. The Zero Insertion Force socket allows easy use of TQFP packages. STK502 includes a demonstration application for temperature monitoring, using an on-board temperature sensor. [more]
AVR STK500 Starter Kit
The Atmel AVR STK500 is a starter kit and development system for Atmels AVR Flash microcontrollers. The STK500 gives designers a quick start to develop code on the AVR combined with features for using the starter kit to develop prototypes and test new designs. The STK500 interfaces with AVR Studio, Atmels Integrated Development Environment for code writing and debugging. Expansion cards are available for different AVR sub-families and larger devices. [more]
AVR Dragon
The AVR Dragon sets a new standard for low cost development tools. AVR Dragon supports all programming modes for the AVR device family [more]
AT91SAM9260-EK Evaluation Kit
The AT91SAM9260-EK evaluation kit enables the evaluation of and code development for applications running on an AT91SAM9260 device. The board supports the AT91SAM9260 in an LFBGA217 package as well as in a PQFP208 package. [more]
AT91SAM9261-EK Evaluation Board
The AT91SAM9261-EK evaluation kit is an effective platform for evaluating chip performance and developing code for applications based on the AT91SAM9261. [more]
AT91SAM7SE-EK Evaluation Kit
The AT91SAM7SE-EK Evaluation Kit enables the evaluation of and code development for applications running on an AT91SAM7SE device. [more]
AT91SAM7X-EK Evaluation Board
The AT91SAM7X-EK evaluation kit enables evaluation capabilities and code development of applications running on an AT91SAM7X256/128. The board is equipped with an AT91SAM7X256 (100-pin LQFP Green package) together with a wide variety of interfaces: [more]
AT91SAM7S-EK (Evaluation Kit)
The AT91SAM7S-EK evaluation kit enables evaluation capabilities and code development of applications running on an AT91SAM7S device. The board is generally equipped with an AT91SAM7S64 (PQFP 64 package). Evaluation Boards may be shipped with an AT91SAM7S128 or an AT91SAM7S256 device (fully compatible with AT91SAM7S64). [more]
AT91SAM7A3-EK (Evaluation Board)
The AT91SAM7A3 features a 54 MIPS ARM7TDMI processor with 256K bytes of high-speed Flash, 32K bytes of SRAM and a rich peripheral set including two CAN controllers (2.0A and 2.0B Full CAN), a USB 2.0 device, one 8-channel 20-bit Pulse Width Modulation, two 8-channel 10-bit ADCs and a complete set of system functions minimizing the number of external components. It provides a powerful, cost-effective solution to many compute-intensive embedded control applications in the automotive and industrial world. [more]
AT91SAM7A1-EK (Evaluation Board)
The AT91SAM7A1 features a 36 MIPS ARM7TDMI processor with 4K bytes of SRAM, fully programmable External Bus Interface (EBI) and a rich peripheral set including one CAN controller (2.0A and 2.0B Full CAN) and four-channel 16-bit Pulse Width Modulation. It provides a powerful, cost-effective solution to many compute-intensive embedded control applications in the automotive and industrial world. [more]
AT91RM9200-EK Evaluation Board
The AT91RM9200-EK Evaluation Board enables real-time code development and evaluation. It supports the AT91RM9200 ARM9™-based 32-bit RISC microcontroller. [more]
JTAGICE mkII On-Chip Debug system
The AVR® JTAGICE mkII from Atmel® is a powerful development tool for On-chip Debugging of all AVR 8-bit RISC microcontrollers with IEEE 1149.1 compliant JTAG interface or debugWIRE Interface. debugWIRE enables on-chip debug of AVR microcontrollers in small pin count packages, using only a single wire for the debug interface.. [more]
AT91SAM-ICE
SAM-ICE is a JTAG emulator designed for Atmel® AT91 ARM® cores. It connects via USB to a PC running Microsoft Windows2000 or XP. SAM-ICE has a built-in 20-pin JTAG connector, which is compatible with the standard 20-pin connector defined by ARM®. [more]
AVR32 UC3L Software Framework
The AVR32 AT32UC3L software framework consists of AVR32 UC3L microcontroller drivers, software services, and demonstration applications. Each software module is provided with full source code, example of usage, rich html documentation and ready-to-use projects for the IAR EWAVR32 and GNU GCC compilers. [more]
AVR32 GNU Toolchain for Windows
AVR32 GNU Toolchain is a set of standalone command line programs used to create applications for AVR32 microcontrollers. The applications run either as embedded applications or on top of an embedded operating system, e.g. Linux®. [more]
AVR32 Studio
AVR32 Studio is a free Integrated Development Environment (IDE) for AVR32 that enables you to write, build, deploy and debug your C/C++ and assembler code.AVR32 Studio integrates with the AVR32 GNU Toolchain including GCC for building applications for AVR32.AVR32 Studio is Built On Eclipse™ and supports Microsoft® Windows® 2000 and XP, and Linux®. [more]
AVR Studio® 4
AVR Studio® 4 is the new professional Integrated Development Environment (IDE) for writing and debugging AVR® applications in Windows® 9x/NT/2000/XP environments. AVR Studio 4 includes an assembler and a simulator. The following AVR development tools are also supported: ICE50, ICE40, JTAGICE mkII, JTAGICE, ICE200, STK500/501/502/503/504/505/520, AVRISP mkII, and AVRISP. [more]
AVR® ONE!
The AVR® ONE! is a powerful development tool for on-chip debugging and programming of all AVR32 devices. In the future AVR ONE! will also support all new AVR family devices.
Suppported debug interfaces are JTAG (IEEE 1149.1), debugWire, PDI and the Nexus (IEEE-ISTO 5001(TM)-2003) auxiliary interface for high-speed trace. Supported programming interfaces are ISP, JTAG and PDI. Interfaces with AVR32 Studio 2 and newer. [more]
