The LPC2880/2888 are an ARM7-based microcontroller for portable applications requiring low power and high performance. It includes a USB 2.0 Hi-Speed device interface, an external memory interface that can interface to SDRAM and flash, an SD/MMC memory card interface, A/D and D/A converters, and serial interfaces including UART, I2C-bus, and I2S-bus. Architectural enhancements like multi-channel DMA, processor cache, simultaneous operations on multiple internal buses, and flexible clock generation help ensure that the LPC2880/LPC2888 can handle more demanding applications than many competing devices. The chip can be powered from a single battery, from the USB, or from regulated 1.8 V and 3.3 V.
Key features
ARM7TDMI processor with 8 kB cache, operating at up to 60 MHz
1 MB on-chip flash program memory with 128-bit access for high performance
64 kB SRAM
Boot ROM allows execution of flash code, external code, or flash programming via USB
On-chip DC-to-DC converter can generate all required voltages from a single battery or from USB power
Multiple internal buses allow simultaneous simple DMA, USB DMA, and program execution from on-chip flash without contention
External memory controller supports flash, SRAM, ROM, and SDRAM
Advanced Vectored Interrupt Controller, supporting up to 30 vectored interrupts
Innovative Event Router allows interrupt, power-up, and clock-start capabilities from up to 107 sources
Multi-channel GP DMA controller that can be used with most on-chip peripherals as well as for memory-to-memory transfers
Serial interfaces:
Hi-Speed USB 2.0 device (480 Mbit/s or 12 Mbit/s) with on-chip physical layer
UART with fractional baud rate generation, flow control, IrDA support, and FIFOs
I2C-bus interface
I2S-bus (Inter IC Sound bus) interface for independent stereo digital audio input and output
SD/MMC memory card interface
10-bit A/D converter with 5-channel input multiplexing
16-bit stereo A/D and D/A converters with amplification and gain control
Advanced clock generation and power control reduce power consumption
Two 32-bit timers with selectable prescalers
8-bit/4-bit LCD interface bus
Real Time Clock can be clocked by 32 kHz oscillator or another source
Watchdog Timer with interrupt and/or reset capabilities.
