The i.MX35 multimedia applications processorrepresents the next step in low-power, high-performance application processors. Based on an ARM11 microprocessor core running at up to 532 Mhz, the device offers specific features and optimized system cost for the target applications.
• Audio connectivity and telematics
— Compressed Audio playback from storage devices (CD, USB, HDD or SD card)
— PlayFromDevice (1-wire and 2-wire support) for portable media players
— iPod/iPhone control and playback
— High-speed CD ripping to USB, SD/MMC or HDD for virtual CD changer
— Audio processing for hands-free telephony: Bluetooth, AEC/NS, Microphone beam forming, and so on.
— Speech recognition
• A/V Connectivity and Navigation
— Includes audio connectivity and telematics features
— Map display & route calculation
— QVGA video decode, WVGA video display
— Sophisticated graphical user interface
The i.MX35 processor takes advantage of the ARM1136JF-S™ core running at 532 MHz that is boosted by a multi-level cache system, and features peripheral devices such as an autonomous image processing unit, a vector floating point (VFP11) co-processor, and a RISC-based DMA controller.
The i.MX35 supports connections to various types of external memories, such as SDRAM, Mobile DDR and DDR2, SLC and MLC NAND Flash, NOR Flash and SRAM. The device can be connected to a variety of external devices such as high-speed USB2.0 OTG, ATA, MMC/SDIO, and Compact Flash.

Features:

The i.MX35 is designed for automotive infotainment video-enabled applications. The i.MX35 provides low-power solutions for high-performance demanding multimedia and graphics applications.
The MCIMX35 is based on the ARM1136 Platform, which has the following features:
• ARM1136JF-S processor
• 16-Kbyte L1 instruction cache
• 16-Kbyte L1 data cache
• 128-Kbyte L2 cache
• 128 Kbytes of internal SRAM
• Vector floating point unit (VFP11) To boost multimedia performance, the following hardware accelerators are integrated:
• Image processing unit (IPU)
• OpenVG 1.1 Graphics Processing Unit (GPU) (not available for the MCIMX351)

The MCIMX35 provides the following interfaces to external devices (some of them are muxed and not available simultaneously):
• 2 controller area network (CAN) interfaces
• 2 SDIO/MMC interfaces, 1 SDIO/CE-ATA interface (CE-ATA is not available for the MCIMX351)
• 32-bit mobile DDR, DDR2 (4-bank architecture), and SDRAM (up to 133 MHz)
• 2 configurable serial peripheral interfaces (CSPI) (up to 52 Mbps each)
• Enhanced serial audio interface (ESAI)
• 2 synchronous serial interfaces (SSI)
• Ethernet MAC 10/100 Mbps
• 1 USB 2.0 Host with ULPI interface or internal full-speed PHY. Up to 480Mbps if external HS PHY is used.
• 1 USB 2.0 OTG (up to 480 Mbps) controller with internal high-speed OTG PHY
• Flash Controller—MLC/SLC NAND and NOR
• GPIO with interrupt capabilities
• 3 I2C modules (up to 400 Kbytes each)
• JTAG
• Key pad port
• Media local bus (MLB) interface
• Asynchronous sample rate converter (ASRC)
• 1-Wire
• Parallel camera sensor (4/8/10/16-bit data port for video color models: YCC, YUV, 30 MPixels/s)
• Parallel display (primary up to 24-bit, 1024 x 1024)
• Parallel ATA (up to 66 Mbytes)
• PWM
• SPDIF transceiver
• 3 UART (up to 4.0 Mbps each)