C8051F50x-51x devices are fully integrated mixed-signal System-on-a-Chip MCUs. They are ideal for space constrained LIN/CAN gateway applications.
Features:
50 MIPS 8051 CPU
kB Flash memory
4 kB RAM
24 MHz on-board oscillator (±0.5%) with clock multiplier
12-bit, 200 ksps ADC, ±1LSB INL
Up to 32 analog inputs Up to 40 digital I/O CAN 2.0 B, LIN 2.0 UART, SPI, I²C PWM, Timers
1.8 to 5.25 V input supply
–40 to 125 ºC operating range Two on-chip comparator and temperature sensor
Packages:
48-Pin QFP/QFN
32-Pin QFP/QFN
Applications
50 MIPS 8051 CPU
Point of control and body electronics
Fluid level monitoring
Seat position and adjustment
Window lift
Parking assistance
Climate control
Motor Control
Sensor Interface
With on-chip Voltage Regulator, Power-On Reset, VDD monitor, Watchdog Timer, and clock oscillator, the C8051F50x devices are truly stand-alone System-on-a-Chip solutions. The Flash memory can be reprogrammed even in-circuit, providing non-volatile data storage, and also allowing field upgrades of the 8051 firmware. User software has complete control of all peripherals, and may individually shut down any or all peripherals for power savings.
The on-chip Silicon Labs 2-Wire (C2) Development Interface allows non-intrusive (uses no on-chip resources), full speed, in-circuit debugging using the production MCU installed in the final application. This debug logic supports inspection and modification of memory and registers, setting breakpoints, single stepping, run and halt commands. All analog and digital peripherals are fully functional while debugging using C2. The two C2 interface pins can be shared with user functions, allowing in-system debugging without occupying package pins.
The devices are specified for 1.8 V to 5.25 V operation over the automotive temperature range (–40 to +125 °C). The Port I/O and RST pins are 5 V push-pull tolerant of input signals up to 5 V. The C8051F500/1/4/5 devices are available in 48-pin QFP and QFN packages and the C8051F502/3/6/7 devices are available in 32-pin QFP and QFN packages. All package options are lead-free, RoHS compliant and qualified to AEC-Q100.
