The TC1130 is a highly integrated controller combining a Memory Management Unit (MMU) and a Floating Point Unit (FPU) on one chip. Thanks to the powerful MMU, this member of the 32-bit
TriCoreTM family supports operating systems such as Linux (real time application interface Linux included). The award-winning unified 32-bit TriCore architecture combines RISC, CISC and DSP functionality in a single chip. An advanced set of on-chip communication peripherals makes this microcontroller ideal for highly integrated applications such as programmable logic controller (PLCs), high-end drives, industrial field bus controllers and communication devices. It ensures design flexibility by providing integrated support for increasingly popular interfaces such as ethernet and USB (universal serial bus). It also supports 4 CAN nodes.
Features:
External Bus Interface
■ Programmable external bus interface for low cost system implementation (Intel-style and Motorola-style device/peripheral support)
■ Glueless interface to a wide selection of external memories (ROM, EPROM, SRAM, SDRAM, Burst Flash, Supports PC100 SDRAM and PC133 SDRAM (runs in maximum 120 MHz))
■ 16/32-bit data transfer
■ Support for little endian byte ordering at bus interface
■ Flexible address generation and access timing
Integrated On-Chip Memory
■ 28 KBytes data memory (SPRAM)
■ 32 KBytes code memory (SPRAM)
■ 16 KBytes instruction cache (ICACHE)
■ 4 KBytes data cache (DCACHE)
■ 64 KBytes SRAM Data Memory Unit (DMU)
■ 16 KBytes boot ROM
High Performance 32-bit Tricore TM V 1.3 CPU with 4-Stage Pipeline
■ 150 MHz maximum clock speed
■ Floating Point Unit (FPU)
■ Dual issue super-scalar implementation MAC instruction maximum triple issue
■ Circular buffer and bit-reverse addressing modes for DSP algorithms
■ Programmable priority of the DMA sub-block on the bus interfaces
■ Full 32-bit addressing capability of each DMA channel
■ Up to 27 ns interrupt response time
■ Hardware controlled context switch for task switch and interrupts
■ Memory Management Unit (MMU)
■ Data formats include: bit, 8-bit byte, 16-bit half word, 32-bit word, and 64-bit double word data formats
■ Efficient critical tasks handling by trap service (non-maskable interrupt)On-Chip Peripheral Units
■ Three asynchronous/synchronous serial channels (ASC0/1/2) with baudrate generator, parity, framing and overrun error detection, and IrDA data transmission. 8 byte data buffer (FIFO with depth of 8) for each ASC
■ Two high speed synchronous serial channels (SSC0/1) with programmable data length and shift direction. 4 byte data buffer (FIFO with depth of 4) for each SSC
■ One inter IC (IIC) serial module with two channels
■ USB module with compliance to USB specification revision 1.1, with support for 1.5 Mbit/s to
12 Mbit/s devices
■ Two high speed Micro Link interfaces (MLI0/1) for controller communication and emulation
■ One multifunctional general purpose timer unit (GPTU) with three 32-bit timer/counters
■ Two capture and compare unit 6 (CCU6) for PWM signal generation
– 3-channel, 16-bit capture and compare unit
– 1-channel, 16-bit compare unit
■ One MultiCAN module with four CAN nodes and 128 message buffers for high efficiency data handling
■ Fast Ethernet controller with 10/100 Mbit/s MII-based physical devices support
■ Individually programmable operation modes for each DMA channel
Technical Summary:
■ The TC1130 is packaged in a P-LBGA-208 package
■ Ambient temperature: -40°C to +85°C
■ Dual voltage supply: 1.5 V Core, 3.3 V I/O
■ 72 digital I/Os
■ Four power-management modes