Development tools  |
|
Infineon Technologies focuses on the three main areas: Energy efficiency, Communications and Security. Therefore it offers semiconductors and system solutions for automotive, industrial electronics, chip card and security as well as applications in communications. Furthermore, the company offers memory products throught its subsidiary Qimonda.
Infineon’s products stand out for their reliability, their quality excellence and their innovative and leadging edge technology in analog and mixed signal, RF and power as well as embedded control. A strong technology portfolio with about 22,900 patents and applications is characteristic for the company.
With a global presence, Infineon operates through its subsidiaries in the USA from Livonia, California, in the Asia-Pacific region from Singapore and in Japan from Tokyo. In 2006 fiscal year (ending September 2006) the company achieved more than EUR 4 bn in revenues. |
|
| Infineon TC1130 |
| The TC1130 series of 32-bit microcontrollers are designed for use in programmable logic control (PLC) systems, high-performance motor drive systems, industrial communications devices, such as switches, hubs and routers, and consumer applications, such as setop boxes. Based on the award-winning TriCore® Unified Processor architecture, the TC1130 series extends Infineon’s well-accepted 32-bit MCU family by offering an on-chip Memory Management Unit (MMU) and Floating Point Unit (FPU), well-targeted on-chip peripherals, and a clock rate up to 150 MHz. At 200 MIPS (millions of instructions per second) the average performance of the TC1130 devices exceeds other currently available industrial MCUs by a factor of three. With a Fast Ethernet (10/100 Mbit per second) controller (TC1130 only), four CAN (Controller Area Network) nodes (TC1130 and TC1115) and a USB (Universal Serial Bus) module (TC1130 only), the TC1130 series accommodate the migration of industrial systems from specialized interface and communications architectures to standards pioneered in the computer industry. This allows to easily connected production lines to control systems and networks, as well as true real-time, deterministic operation. The integrated FPU and MMU also support the use of the increasingly popular Linux or RTAI Linux operating systems. more
|
| Group lineup :
TC1130 |
| Infineon TC116x |
The TC116x series are optimized for demanding embedded applications where real-time control, DSP performance and specific peripheral functions are needed. Focus applications are motor drives and industrial control.
The TC116x devices are based on the award-winning unified 32-bit TriCore® architecture combining RISC, CISC and DSP functionality in a single chip. The rich peripheral set includes a flexible timer unit (GPTA) for PWM generation, fast multi-channel ADCs, optional MultiCAN module, Asynchronous and Synchronous Serial Interfaces (ASC/SSC) and a Micro Link Interface (MLI) for interfacing to a second controller.
The flexible GPTA concept enables scalable motor control solutions and an autonomous full coherent high-speed PWM generation to achieve highly efficient drive operations. The TC116x product family starts with the low-end devices TC1161/62 featuring 1MByte flash and optional CAN. The mid-range devices TC1163/64 offer higher performance at 80 MHz and a peripheral control processor, whereas the high-end devices TC1165/66 extend the internal memory to 1.5MByte and add extra serial interfaces. more
|
| Group lineup :
TC1161 | TC1162 | TC1163 | TC1164 | TC1165 | TC1166 |
| Infineon C166® |
| Looking for an established standard 16bit architecture with a wide variety of peripherals, package and performance options? Then have a look at Infineon´s C166® family which provides everything you need. The C166® family with pipelined 16bit core architecture, optimised real time embedded control peripherals offers a wide range of performance variations. Finally, if quality and long time availability is a must for your business, there is no away around an Infineon C166® microcontroller - except our new XC166 family members. more
|
| Group lineup :
C161CS | C161K | C161O | C161PI | C161S | C164CI | C164CL | C164CM | C164SI | C164SM | C165 | C167CR | C167CS | C167SR |
| Infineon XC166 |
| The XC166 family of 16-bit microcontrollers offers a wide range of products scalable in performance, memory, and peripherals. This makes it easy to find the controller that best fits to your application needs. The migration path from C166® to XC166 is supported by the same basic architecture and instruction set, so that a high level of reuse can be accomplished.The XC166 family with its enhanced 16-Bit architecture and ist powerful feature set is more than just a 16-Bit Microcontroller. Both, built in safety features and high performance peripherals,are standard for the XC166 family and make these devices thecontroller of choice for automotive and industrial applications. more
|
| Group lineup :
XC161CJ/CS | XC164CM | XC164CS | XC167CI |
| Infineon C505CA |
C505C Microcontroller with Complete CAN Capability
The C505CA enhances the C500 family of 8-bit microcontrollers by a new member which provides full CAN version 2.0B integrated On-Chip.
The C505CA meets the current requirements for increasingly small controllers with high performance, optimized Electro Magnetic Compatibility (EMC) behavior and fast communication between decentralized sensors, actuators and the host.
The device provides 32 KByte of OTP or 16/32 KByte of ROM, 256 Byte of RAM, 1 KByte of XRAM, Controller Area Network (CAN) Version 2.0B, an asynchronous/synchronous serial interface and highly accurate 10-bit Analog to Digital Converter (ADC) integrated on chip.
With an external clock rate of 20 MHz, the C505CA has an instruction time of 300 ns. Typical applications for the C505CA are automotive body and industrial control. more
|
| Group lineup :
C505CA |
| Infineon C515C |
C515C - A Multipurpose Microcontroller
The C515C is a derivative of the C500 family of 8-bit-microcontrollers with new peripherals. It combines the well known functionality of the standard 80C515A microcontroller with enhanced features.
The C515C features a SPI compatible interface and a CAN module which meets version 2.0B of the Controller Area Network specification.
The high peripheral performance and the CAN feature is ideal for automotive and industrial control applications. Due to EMC/RFI enhancements and power consumption reduction this design excels especially for car radio applications. more
|
| Group lineup :
C515C |
| Infineon XE166 |
| Infineon Technologies´ Real Time Signal Controller combines the traditional strengths of a Microcontroller Unit (MCU) to control peripherals with the computing power of Digital Signal Processors (DSP). All in one enhanced XE166 core. Together, the Microcontroller’s real-time capability and ease of use and the DSP’s mathematical performance and data throughput form a powerful singe-chip solution ideal for many embedded applications. more
|
| Group lineup :
XE164 | XE167 |
|
|
|
|
 |
Bosch to Use Radar Chip from Infineon
Infineon Technologies AG (FSE/NYSE: IFX) today announced that Robert Bosch GmbH will be employing a chip from Infineon in its next generation of automotive radar systems. more
|
Infineon Provides Security Chips For One of China’s largest Contactless Transportation Cards: The
Shenzhen, China and Neubiberg, Germany – August 12, 2008 – Infineon Technologies (FSE/NYSE: IFX), the world’s leading supplier of integrated circuits (ICs) for chip cards, today announced it is the sole chip supplier for the largest contactless microcontroller transportation card in China in 2008. In the last six months, Shenzhen Tong Ltd., the public transportation company, has issued more than two million “Shenzhen Tong” microcontroller cards in the city of Shenzhen which incorporate Infineon’s security microcontroller. Issuance unit volume of these microcontroller cards is expected to exceed three million by the end of 2008. more
|
|
|
|
|
|
|
